User guide

Installation

1 Remove the screw and Metal cover.

2 Attach the Box Guide to the rail slots, and press it upward.

3 Use screws to secure the player and the Box Guide as shown below.

We recommend you to use the items provided with your NC2000 and follow our instructions for integrating

the product with your monitor in order to ensure the correct results.

Attention

The illustrations shown are to guide your integration and may differ from your product.

NC2000

If the card is not fully inserted in the direction of the arrow, firmly press or gently strike the card in the

direction of the arrow to make sure it is fully inserted and connected. Be careful to use only as much force

as is necessary. Do not use a tool, such as a hammer, to strike the card. Only use your hand.

Note