User guide

15
3 Connect the NC1000's RS-232C OUT to the RS-232C IN of the  rst monitor, which has SET ID = 1.
4 Connect other monitors with RS-232C cables as shown below (IN/OUT separated).
1 Connect the NC1000's D-sub OUT to the D-sub IN of the  rst monitor, which has SET ID = 1.
2 Connect other monitors with D-sub cables as shown below (IN/OUT separated).
NC1000
NC1000 Installation Confirmation
Connection to Multiple Monitors
Connect the NC1000 to the monitor as described
on the previous pages and turn the monitor and the
NC1000 on. When the monitor is on, the SuperSign
Player home screen will appear as shown here.
Each NC1000 can accommodate up to 25 monitors for video playback. (SET ID: 1 to 25)
Attention
● You may want to purchase additional RS-232C cables to use several monitors together.
● You cannot use multiple monitors with the HDMI cable.
NC1000