User guide

1 Click the button in the lower left of the screen.

2 Select Start > Control Panel > Sounds and Audio Devices > Audio.

3 Select Play Sounds > Intel(R) Display Audio Output 1 from the list and click OK.

1 Click the button in the lower left of the screen.

2 Select Start > Control Panel > Sounds and Audio Devices > Audio.

3 Select Play Sounds > Realtek HD Audio output from the list and click OK.

Select Start > Control Panel > Hardware and Sound > Sound.

Click the Play tap  rst. Right-click on the HDMI device or speakers you want and

select Set as Default Device then click OK to connect the HDMI audio device or

select Disable to disconnect it.

※ In order to change the audio devices, you must restart the computer.

Connecting/Disconnecting HDMI Audio Device in Windows

Connecting HDMI Audio Device

Disconnecting HDMI Audio Device

Connecting/Disconnecting HDMI Audio Device in Windows Embedded Standard 7 E

Move to the desktop of the monitor connected to the NC1100/NA1000/NA1100.

NC1100/NA1000/NA1100

Attention

● If you do not reset after disconnecting the HDMI cable from the NC1100/NA1000/NA1100, the sound will not

work.

● In order for the sound to work properly, stop playing the content and restart the NC1100/NA1000/NA1100.

NC1100/NA1000/

NA1100