User guide

34
5 Connect a LAN cable to NC1100/NA1000/NA1100.
Attention
● NC1100/NA1000/NA1100 prioritizes video output in the following order: RGB → DP → HDMI. If
you connect multiple cables simultaneously and turn the product on, video output is prioritized
accordingly.
● When the product is turned on after cable connection or the operating system is completely
booted, DP and HDMI video output start operating.
● The product does not support a dual mode where DP can be switched either to HDMI or DVI.
It is only for DP output.
● The display port (DP) of the NC1100, NA1000 and NA1100 does not support digital audio output. It
is recommended to use it with a line-out cable for analog audio output.
MIC IN
PW
MIC IN
PW
MIC IN
PW
MIC IN
PW
MIC IN
PW
MIC IN
PW
MIC IN
PW
MIC IN
PW
MIC IN
PW
MIC IN
PW
3
Connect the NC1100/NA1000/NA1100's RS-232C OUT to the RS-232C IN of the rst monitor, which has
SET ID = 1.
4 Connect other monitors with RS-232C cables as shown below (IN/OUT separated).
1 Connect the NC1100/NA1000/NA1100's D-sub OUT to the D-sub IN of the rst monitor, which has SET ID = 1.
2 Connect other monitors with D-sub cables as shown below (IN/OUT separated).