User guide

Table Of Contents

4 Connect a LAN cable to NC1100/NA1000/NA1100.

3 Connect NC1100/NA1000/NA1100 (OUT) to the monitor (IN) with an RS-232C cable.

MIC IN

1 Click the button in the lower left of the screen.

2 Select Start > Control Panel > Sounds and Audio Devices > Audio.

3 Select Play Sounds > Intel(R) Display Audio Output 1 from the list and click OK.

1 Click the button in the lower left of the screen.

2 Select Start > Control Panel > Sounds and Audio Devices > Audio.

3 Select Play Sounds > Realtek HD Audio output from the list and click OK.

Select Start > Control Panel > Hardware and Sound > Sound.

Click the Play tap rst. Right-click on the HDMI device or speakers you want and

select Set as Default Device then click OK to connect the HDMI audio device or

select Disable to disconnect it.

※ In order to change the audio devices, you must restart the computer.