User guide
Table Of Contents
16
3
Connect the NC1000's RS-232C OUT to the RS-232C IN of the rst monitor, which has SET ID = 1.
4
Connect other monitors with RS-232C cables as shown below (IN/OUT separated).
1 Connect the NC1000's D-sub OUT to the D-sub IN of the rst monitor, which has SET ID = 1.
2 Connect other monitors with D-sub cables as shown below (IN/OUT separated).
Connection to Multiple Monitors
Each NC1000 can accommodate up to 25 monitors for video playback. (SET ID: 1 to 25)
You can set the tile mode by connecting multiple monitors.
Attention
● You may want to purchase additional RS-232C cables to use several monitors together.
● You cannot use multiple monitors with the HDMI cable.
Specications
NC2000