User guide

15
1 Select Start > Control Panel > Hardware and Sound > Sound.
2
Click the Play tap rst. Right-click on the DP device or speakers you want and
select Set as Default Device then click OK to connect the audio device or select
Disable to disconnect it.
※ In order to change the audio devices, you may restart the computer.
Connecting/Disconnecting DP(Display Port) Audio Device in Windows Embedded Standard 7P
Attention
●If an audio device is connected or removed while media content is played, you need to stop the content
and play again.
●If an DP cable is removed from the MP700, sound does not play. In addition, when the cable is
reconnected, it may take time before sound plays again.