User guide

1 Click the button in the lower left of the screen.

2 Select Start > Control Panel > Sounds and Audio Devices > Audio.

3 Select Play Sounds > Intel(R) Display Audio Output 1 from the list and click OK.

1 Click the button in the lower left of the screen.

2 Select Start > Control Panel > Sounds and Audio Devices > Audio.

3 Select Play Sounds > Realtek HD Audio output from the list and click OK.

Select Start > Control Panel > Hardware and Sound > Sound.

Click the Play tap rst. Right-click on the HDMI device or speakers you want and

select Set as Default Device then click OK to connect the HDMI audio device or

select Disable to disconnect it.

※ In order to change the audio devices, you may restart the computer.

Connecting/Disconnecting HDMI Audio Device in Windows

Connecting HDMI Audio Device

Disconnecting HDMI Audio Device

Connecting/Disconnecting HDMI Audio Device in Windows Embedded Standard 7 E,P

Move to the desktop of the monitor connected to the MP500.

Attention

●If an audio device is connected or removed while media content is played, you need to stop the content

and play again.

●If an HDMI cable is removed from the MP500, sound does not play. In addition, when the cable is

reconnected, it may take time before sound plays again.