User manual

15Operation
4
Operation
Setting the Clock
1. Turn the power on.
2. Press CLOCK for at least 2 seconds.
3. Choose from either, by using
. m
or
M >
.
- AM 12:00 (for an AM and PM display) or
0:00 (for a 24 hour display)
4. Press SET for con rm your selection.
5. Select the hours. by using
. m
or
M >
.
6. Press SET.
7. Select the minutes, by using
. m
or
M >
.
8. Press SET.
Using your player as an alarm clock
1. Turn the power on.
2. Press and hold TIMER. Each functions
 ashes.
3. Press SET when the function you want to
be woken by is showing.
4. “ON TIME” will be displayed. This is where
you set the time you want the alarm to
start. Use the
. m
or
M >
to
change the hours and minutes and press
SET to save.
5. The “OFF TIME” will be displayed. This is
where you set the time you want the
function to stop.
6. Use the
. m
or
M >
to change
the hours and minutes and press SET to
save.
7. You will be shown the volume (VOL) you
want to be woken by. Use the
. m
or
M >
to change the volume and press
SET to save. The
alarm
icon
“ ”
shows that
the alarm is set.
8. Press TIMER button 2times. You can check
the setting status.
NOTE
• If you set the clock time, you can check the
time by pressing CLOCK even when the player
is turned o .
• If you set the clock time and alarm, you can
check the alarm ico
n “ ” by pressing CLOCK
even when the player is turned o .
• If you set the clock time and alarm, you
can check the alarm i
con “ ” and setting
information by pressing TIMER even when the
unit is turned o .
• Make sure to use the buttons - CLOCK, TIMER
and SET on the unit.
MCD65,35_EVENT_ENG.indd 15MCD65,35_EVENT_ENG.indd 15 10. 07. 28  2:5210. 07. 28  2:52