W1_MCD23_ENG_42270413 MODEL : MCD23 (MCD23-D0U, MCS23F) ENGLISH
Safety Precaution CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
There is so much your Hi-Fi system can do ENGLISH Contents About Player About Remote control Setting up Listening to CDs Listening to music from your portable player Listening to the radio Listen to cassette tapes Playing music using USB USB direct Recording Tape Recording Setting the Clock Use your player as an alarm clock Fall asleep while listening to your player VSM (Virtual Sound Matrix) Troubleshooting Specifications 4 5 6 7 7 8 8 9 9 10 10 10 10 10 11 11 The making of unauthorized copies of copy
About Player TUNER You can select the TUNER (FM or AM) function. VOLUME Control the volume when using any function. DISC TRAY TIMER With the TIMER function you can turn CD play and radio reception on or off at a desired time. CLOCK For setting the clock and checking the time. Turn on or off SET (RDS - OPTIONAL) Confirms the time you have selected when setting the clock. EQ You can choose sound impressions. eXtreme Dynamic Sound System Reinforce the treble, bass and surround sound effect.
About Remote control Sound quality adjustment You can choose sound impressions. Press EQ repeatedly, the display changes in the following order, NATURAL → AUTO -- EQ (Only MP3/WMA file) → POP → CLASSIC → ROCK → JAZZ → NORMAL. Turn on or off Search for a folder of MP3/WMA files When a CD containing MP3/WMA files in several folders is being played, press PRESET/FOLDER to select the folder you want to play.
Setting up 1 Connect the speaker cables to the player Cables from the left-hand speaker connect to the terminal marked L (left) + (plus) and - (minus). Cables from the righthand speaker are connected to the terminal marked R (right) + (plus) and - (minus). To connect the cable to the player, press each of the four square plastic finger pads on the rear of the player. The connector will open ready to receive a cable.
About MP3/WMA Listening to CDs Audio CD and MP3/WMA CD can be played back in this player. ON PLAYER 1. Open the CD door: Z OPEN/CLOSE 2. Select the CD tray: DISC SKIP ON REMOTE D.SKIP 3. Insert the CD: Label facing up. 4. Close the CD door: Z OPEN/CLOSE 5. Select the CD function: The display will show the total number of tracks (files). CD FUNCTION 6. Start the CD playing: B/[] B/[] 7.
Listening to the radio Make sure both the FM and AM aerials are connected. ON PLAYER ON REMOTE 1. Select either FM or AM: TUNER FUNCTION 2. Select the radio station: TUNING -/+ TUN.- / TUN.+ 3. To ‘save’ a radio station: A preset number will show in the display. 4. To select a ‘saved’ station: 5. To confirm press: Up to 50 radio stations can be saved. PROGRAM/MEMO You can search the radio stations by programme type by pressing RDS. The display will show the last PTY in use.
Playing music using USB USB direct Recording The advantage of connecting your portable USB player through the system’s USB port is that the portable device can be controlled from the system. ON PLAYER ON REMOTE 2. Select the USB function: The display will show READ, followed by the number of files displayed: USB INPUT 3. Start the USB playing: B/[] 4. To stop a USB playing: x 1. Connect the portable player to the system using a USB cable (not supplied): 5.
Use your player as an alarm clock Tape Recording Record from a CD, USB, PORTABLE or radio to cassette Wind the tape to the point recording starts. Use only normal tapes. ON PLAYER 1. Open the TAPE door: Insert a blank tape: xZ 2. Close the TAPE door: 3. Select a mode in which you want to record: Start playing the source you want to record. CD, TUNER, USB or PORTABLE 4. Start the Recording: z and B 5.
Troubleshooting Symptom Specifications Cause Correction General No power. No sound. The power cord is not plugged in. Plug in the power cord. Check whether electricity failed. Check the condition by operating other electronic devices. Check whether you select right function. Press FUNCTION/INPUT and check the selected function.
P/NO : MFL42270413
