User guide

12
Specifications
General
Power supply 200-240 V, 50/60 Hz
Power consumption MCD104: 30 W MCD204: 50 W
Net Weight MCD104: 5 kg MCD204: 5.27 kg
External dimensions (WxHxD) (272 x 338 x 358) mm
Operating temperature 5
o
C to 35
o
C
Operating humidity 5 % to 85 %
Tuner
FM Tuning Range 87.5 to 108.0 MHz or
87.50 to 108.00 MHz
AM Tuning Range (optional) 522 to 1620 kHz or 522 to 1710 kHz
or 520 to 1710 kHz
Amplifier
Output Power MCD104: 100 W MCD204: 200 W
T.H.D 0.50 %
Frequency Response 45 Hz to 20 kHz
Signal-to-noise ratio 70 dB
CD
Frequency response 45 Hz to 20 kHz
Signal-to-noise ratio 70 dB
Dynamic range 70 dB
Cassette
F.F/REW Time 120 sec (C-60)
Frequency Response 250 to 8000 Hz
Signal to Noise Ratio 40 dB
Channel Separation 35 dB (P/B)/ 45 dB (R/P)
Erase Ratio 50 dB (MTT-5511)
Speakers (MCS104F)
Type 2 Way 2 Speaker
Impedance 4 Ω
Input Power 50 W
Max. Input Power 100 W
Net Dimensions (WxHxD) (220 x 338 x 228) mm
Net Weight (1EA) 2.28 kg
Speakers (MCS204F)
Type 2 Way 2 Speaker
Impedance 4 Ω
Input Power 100 W
Max. Input Power 200 W
Net Dimensions (WxHxD) (220 x 338 x 243) mm
Net Weight (1EA) 3.06 kg
USB
Version 1.1
BUS power supply DC 5 V 500 mA
Troubleshooting
Symptom Cause Correction
General
No power.
No sound.
The power cord is not plugged in.
Check whether electricity failed.
Check whether you select right function.
Plug in the power cord.
Check the condition by operating other
electronic devices.
Press FUNCTION and check the select-
ed function.
CD
The unit does not
start playback.
An unplayable disc is inserted.
The disc is dirty.
Insert a playable disc.
Clean the disc.
RADIO
Radio stations
cannot be tuned in.
The antenna is positioned or connected
poorly.
Connect the antenna securely.
Remote control
The remote control
does not work
properly.
The remote control is too far from the
unit.
There is an obstacle in the path of the
remote control and the unit.
The battery in the remote control is
exhausted.
Operate the remote control within about
23 ft (7 m).
Remove the obstacle.
Replace the battery with new one.
TAPE
Unable to record. Record protect tabs are removed. Cover holes on back edge of tape with
tap.
Designs and specifications are subject to change without notice.
MCD104-D0U-ADEULL-ENG 10/4/11 10:17 AM Page 12