User guide

Operating 13
Operating
3
iPod/ iPhone CONTROL
MODE
You can control on the unit and iPod /
iPhone.

Press
F
on the unit to select CONTROL
and then set CONTROL to IPOD. Then
playback is paused. And you can control
on the unit and iPod / iPhone.

While using the iPod/iPhone CONTROL
MODE, any functions are not available
on the unit.

Sets CONTROL to HEAD UNIT to cancel
the iPod/ iPhone CONTROL MODE.
Compatible iPod / iPhone
models

iPod classic

iPod nano 6th generation

iPod touch 4th generation

iPhone 3G / 3GS / 4
We recommend that you use the
OS Version 4.2.1 or more.
“Made for iPod” and “Made for iPhone”
mean that an electronic accessory has
been designed to connect speci cally
to iPod or iPhone respectively, and has
been certi ed by the developer to meet
Apple performance standards. Apple is
not responsible for the operation of this
device or its compliance with safety and
regulatory standards.
Please note that the use of this accessory
with iPod, iPhone may a ect wireless
performance.
Connecting a Bluetooth
wireless technology
Before you start the pairing procedure,
make sure the Bluetooth wireless
technology is turned on in to your phone.
Refer to your phone’s user guide. Pairing
links your unit and phone with Bluetooth
wireless technology, and is required only
once for the initial setup. The process of
pairing may be di erent depend on the
phones. The PIN CODE is 1234.
ON PLAYER
1. Select the source to
BT
SRC
2. Search the phones
supported Bluetooth
wireless technology.
F
3. Select a phone you
want to connect.
Rotate the
volume knob
4. Connect the phone.
Press the
volume knob
Microphone
The microphone needs to be close to
and pointed toward the person speaking.
Install the microphone as shown below.
Microphone unit
If you power o the unit while talking
on the phone through the unit by
using the BT function, the function is
deactivated and you can talk on the
phone directly.
,
Note