ENGLISH DEUTSCH NEDERLANDS MAX620BO ITALIANO Please read this manual carefully before operating your set and retain it for future reference.
Getting Started Safety Information CAUTION 1 RISK OF ELECTRIC SHOCK DO NOT OPEN or any functions. Pull over in a safe and legal manner before attempting such operations. Do not use for many hours at extremely low or high temperature. (-10 °C to 60 °C) Getting Started CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Table of Contents 2. All electrical and electronic products shall be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. 3. The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health. 4.
Getting Started Front panel j U Skip / Search / Seek / Tune CALL Answers a call. END Ends a call. 1 Getting Started k Remote control F In each mode, sets playback items. • MENU Activates setting menu. l 6 Opens the front panel. m Remote Sensor a T Plays and pauses playback. • TA (Optional) Searches stations that have TA / TP information, when it is pressed and held. d R (EJECT) Ejects the iPod/ iPhone DOCKING STATION. b SRC When pressed, selects function sources.
Connecting h c/v Skip / Search / Seek / Tune Battery Installation Installation Type 1 i DISP Press it, you can check the clock time. Basic Installation Before installing, make sure that the ignition-switch is set to OFF and remove the terminal of the car battery to avoid short-circuiting. ISO-DIN Installation Bend the claws according to the thickness of the dashboard. 2 Type 2 2 1 j RPT Repeats playback. Control panel k INT Intro scan.
Connecting About detachable control panel Detaching the control panel 1. Press the 6 to open the control panel. Attaching the control panel 2. Lift the control panel slightly. 3. Push the control panel to right. 2 Connecting 1. Align the left side of the panel with the stopper. 2. Push the right side of panel into the unit until it clicks. > Caution The control buttons may not work properly if the control panel is not attached properly. If this occurs, gently press the display.
Connecting 7 Connection Connecting to a car Before installing, make sure that the ignition-switch is set to OFF and remove the terminal of the car battery to avoid short-circuiting. Wired mic Wired remote input (Black): Hard-wired control adapter can be connected. (Optional) To Audio out ab c d ab c d e f g h e f g h Sub-woofer Right Front Right Rear Right Power Antenna When being connected in a wrong way, the unit displays as follows.
Operating Operation Basic operations 1. Turn the unit on by pressing any key on the unit. 2. Select a source by pressing SRC. 3. Rotate the volume knob to adjust the volume on the unit. Or press VOLUME W / S on the remote control. You can adjust [SOUND], [LIGHT] and [OTHER] settings. On the unit 1. Press T to mute your unit. (When MP3/ WMA file is played, it will be paused.) Or press MUTE on the remote control. 2. Press it again to cancel 1. Press and hold • MENU. 2.
Operating For [OTHER] setting AUX (Auxiliary) ON / OFF It is possible to use auxiliary equipment with this unit. Activate the auxiliary setting when using auxiliary equipment connected to this unit. DEMO OFF / ON You can change the initial indication on the display to information name (function name, EQ name, etc...) while listening to a source. BEEP 2ND / ALL BEEP 2ND : The beep is generated when a key is pressed for longer than 2 seconds. BEEP ALL : The beep is generated when any key is pressed.
Operating , Note When a station is stored on the preset numbers on which another station of the same band has already been preset, the previously preset station is automatically erased. Listening to a preset station 1. Press F to select BAND and then set 3 Adjusting TUNER settings On the unit 1. Press F . 2. Rotate the volume knob to select an item and press it. 3. Rotate the volume knob to set the option and press it. 4. If you want to return to the previous step, press .
Operating Using a SD card 1. Detach the control panel. (Refer to "About detachable control panel" on page 6.) 2. Insert the SD card. Skipping to another file On the Remote Control Quick search of a desired file Press Y/U on the unit. Or press c / v on the remote control. 1. Press INT / RPT / SHF. 2. Press it again to cancel. Or 1. Press the volume knob on the unit. Or press ENTER on the remote control. 2. Rotate the volume knob on the unit to select a desired ROOT or folder and press it.
Operating Listening to music by connecting iPod/iPhone You can enjoy iPod / iPhone-stored music on the unit. 1. Press R. 2. Connect the iPod / iPhone. 3. Press SRC to select a source to IPOD. (iPod/ iPhone docking station can be rotated by quarter) , Note During iPod/ iPhone playback, if the iPod/ iPhone and the unit are paired via Bluetooth wireless technology, it may not sound.
Operating iPod/ iPhone CONTROL MODE You can control on the unit and iPod / iPhone. Press F on the unit to select CONTROL and then set CONTROL to IPOD. Then playback is paused. And you can control on the unit and iPod / iPhone. While using the iPod/iPhone CONTROL MODE, any functions are not available on the unit. Sets CONTROL to HEAD UNIT to cancel the iPod/ iPhone CONTROL MODE.
Operating Using a Bluetooth wireless technology Listening to music of the Bluetooth device Disconnecting a phone When your unit and the Bluetooth device are pairing, Press SRC repeatedly to select "BT". And play the music stored on your Bluetooth device. Refer to the your Bluetooth device’s user guide. Press F -> DISCONNECT -> YES Answering and Ending a call To answer a call, press CALL. Bluetooth wireless technology profiles information To end a call, press END.
Operating 15 Using "LG CAR Remote" application You can control the unit by using the "LG CAR Remote" application. 1. Search the “LG CAR Remote” application and install it. [Initial screen] [Tuner screen] You can select a source by pressing "SOURCE". 3 2. Pairing links your unit and iPhone with Bluetooth wireless technology. (Refer to the page 13.) 3. Press and hold • APP. When you run the “LG CAR Remote” application, activating source is displayed after initial screen.
Operating Phone compatibility list Bluetooth list and manufacturing company applicable.
Operating 17 Bluetooth list and manufacturing company applicable. H : Handsfree A : Audio Streming Company List H A Company List H A APPLE iPhone 3GS (16GB) 0 0 Motorola XT701 0 0 iPhone 4 (16GB) 0 0 XT720 (MOTOROI) 0 0 0 Milestone Droid 0 0 i-Pad “The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by LG Electronics is under license. Other trademarks and trade names are those of their respective owners.
Troubleshooting Troubleshooting Symptoms Cause Solution Power doesn't turned on. Leads and connectors are not properly. Confirm once more that all connections are correct. The fuse is blown. Rectify the problem that caused the fuse to blow, and then replace it. Be very sure to install the correct fuse with the same rate. Noise and other factors are causing the built in microprocessor to operate incorrectly. Turn the unit off and then on again. Cables are not connected correctly.
Appendix Specifications 19 AUX Frequency Response : 20 Hz to 20 kHz General S / N Ratio : 80 dB Output Power : 53 W x 4 CH (Max.) Distortion : 0.1 % Power Source : DC 12 V Channel Separation (1 kHz) : 45 dB Speaker impedance : 4 Ω Max Input Level (1 kHz) : 1.1 V Ground System : Negative Dimensions (W x H x D) : (178 x 50 x168) mm (without Control Panel) SD Distortion : 0.1 % Net Weight : 1.10 kg Bluetooth TUNER TX POWER 4 dBm FM Tuning Range : Version Bluetooth Specification 2.
