User guide

ENGLISH
57
EXTERNAL CONTROL DEVICE SETUP (ONLY APPLIED TO B2B MODEL USED IN A PLACE LIKE A HOTEL)
20. Programme Add/Skip (Command: m b)
To set skip status for the current Programme.
Transmission
[m][b][ ][Set ID][ ][Data][Cr]
Data 00 : Skip 01 : Add
Acknowledgement
[b][ ][Set ID][ ][OK/NG][Data][x]
Real data mapping
00 : Step 0 Tint
: Step 0 : R50
A : Step 10 (Set ID 10) :
: Step 49 : R1
F : Step 15 (Set ID 15) Step 50 : 0
10 : Step 16 (Set ID 16) Step 51 : G1
: :
64 : Step 100 Step 100 : G50
:
6E : Step 110 Balance
:
73 : Step 115 Step 0 : L50
74 : Step 116 :
: Step 49 : L1
CF : Step 199 Step 50 : 0
:
Step 51 : R1
FE : Step 254
:
FF : Step 255 Step 100 : R50
Colour Temperature
Step 0 : W50
:
Step 49 : W1
Step 50 : 0
Step 51 : C1
:
Step 100 : C50
21. Key (Command: m c)
To send IR remote key code.
Transmission
[m][c][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
* Data Key cod -See p.48
Acknowledgement
[c][ ][Set ID][ ][OK/NG][Data][x]
22. Back Light (Command: m g)
To Control the back light.
Transmission
[m][g][ ][Set ID][ ][Data][Cr]
Data : data Min: 00 to Max: 64
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
23. Input select (Command: x b) (Main Picture Input)
To select input source for main picture.
Transmission
[x][b][ ][Set ID][ ][Data][Cr]
Data Structure
Data 00: DTV 40: Component
10: Analogue 60: RGB
20: AV1 90: HDMI 1
21: AV2 91: HDMI 2
Acknowledgement
[b][ ][Set ID][ ][OK/NG][Data][x]