User guide

ENGLISH
52
EXTERNAL CONTROL DEVICE SETUP (ONLY APPLIED TO B2B MODEL USED IN A PLACE LIKE A HOTEL)
Command reference list
Communication Parameters

Baud rate: 9600 bps (UART)

Data length: 8 bits

Parity : None

Stop bit: 1 bit

Communication code: ASCII code

Use a crossed (reverse) cable.
COMMAND1 COMMAND2
DATA
(Hexadecimal)
01. Power k a 00 to 01
02. Aspect Ratio x c See p.54
03. Screen Mute k d 00 to 01
04. Volume Mute k e 00 to 01
05. Volume Control k f 00 to 64
06. Contrast k g 00 to 64
07. Brightness k h 00 to 64
08. Colour k i 00 to 64
09. Tint k j 00 to 64
10. Sharpness k k 00 to 64
11. OSD Select k l 00 to 01
12. Remote control lock mode k m 00 to 01
13. Treble k r 00 to 64
14. Bass k s 00 to 64
15. Balance k t 00 to 64
16. Colour Temperature x u 00 to 64
17. Energy Saving j q 00 to 05
18. Auto Configuration j u 01
19. Tune Command m a See P.56
20. Programme Add/Skip m b 00 to 01
21. Key m c Key Code
22. Back Light m g 00 to 64
23. Input select (Main) x b See p.57
24. 3D x t See p.58
25. Extended 3D x v See p.58

Note : During USB operations such as Dvix or EMF, all commands except Power(ka) and Key(mc) are
not executed and treated as NG.