User’s Guide M208WV Make sure to read the Safety Precautions before using the product. Keep the User's Guide(CD) in an accessible place for furture reference. See the label attached on the product and give the information to your dealer when you ask for service.
Before Connecting to the PC Connecting the stand Before setting up the product, ensure that the power supply, the computer system, and other attached devices is turned off. 1. Place the monitor with its front facing downward on a soft cloth. 2. Connect the Stand Base to the Stand Body and press latches at the button toward each end. 3. Connect the Stand, assembled in step 2, to the Monitor Panel until you hear a "Click". 4. Once assembled take the monitor up carefully and face the front side 2.
Before Connecting to the PC Before setting up the product, ensure that the power supply, the computer system, and other attached devices is turned off. Positioning your display 1. Adjust the position of the panel in various ways for maximum comfort. Tilt Range : -3˚~10˚ Swivel : 350˚ Warning: When adjusting the angle of the screen, do not put your finger(s) in between the head of the monitor and the stand body. You can hurt your finger(s).
Name and Function of the Parts Name of the Remote Control Buttons POWER TV MUTE PSM TV : TV button POWER INPUT INPUT SSM Input I/II TV AV1 AV2 Component RGB HDMI/DVI Each time you press the Input button it will change to TV AV1 AV2 Component RGB HDMI/DVI. If nothing is inputted for several seconds the screen will automatically move to the selected menu. OK LIST Q.VIEW MUTE Switches the sound on or off.
Name and Function of the Parts Name of the Remote Control Buttons I/II : Bilingual choice and sound mode selection POWER TV MUTE PSM [TV] INPUT SSM To switch from Stereo to Mono sound in case of stereo transmission, or from Nicam Stereo to Nicam Mono, in case of digital transmission. to switch from Nicam Dual I to Nicam Dual II or Nicam Dual I+II in case of Nicam Dual transmission.
Name and Function of the Parts Name of the Remote Control Buttons LIST Q.VIEW PR ( ) Buttons Able to change channel. VOL ( ) Buttons Able to adjust sound. OK Button Use when functional adjustment is completed. PR OK VOL VOL PR SLEEP MENU HOLD REVEAL ARC/* MIX SIZE ? INDEX TEXT i MODE TIME M UPDATE X MENU Use this button to enter the On Screen Display menu.
Name and Function of the Parts Remote Control - Using the Teletext function Please select your local teletext language. (page 24) If you don't, the teletext may not appear correctly on the screen. Yellow key Favourite Program On : Rotate favourite channel LIST Favourite Program Off : To display the previously selected TV channel. Q.VIEW PR OK VOL VOL HOLD Press the button to stop the automatically rotating of the sub pages. Press the button again to continue the automatic rotating again.
Name and Function of the Parts Remote Control - Using the Teletext function LIST Q.VIEW REVEAL PR OK VOL Press the button to reveal/conceal the hidden information, such as solutions to riddles and puzzles. Press this button again to remove the information from the display. VOL PR INDEX SLEEP MENU ARC/* TEXT To display the main index. MODE HOLD REVEAL MIX SIZE ? INDEX i MODE The mode will be switched in the Teletext mode.
Name and Function of the Parts Rear View HDMI/DVI IN AUDIO (RGB/DVI) IN RGB(PC/DTV) IN ANTENNA IN L VIDEO AUDIO R S-VIDEO (MONO) AV1 H/P AV IN 2 Y PB PR VIDEO COMPONENT IN HDMI/DVI IN L R AUDIO AUDIO (RGB/DVI) IN RGB(PC/DTV) IN ANTENNA IN L VIDEO AUDIO R S-VIDEO (MONO) AV1 H/P AV IN 2 Y PB PR VIDEO COMPONENT IN L R AUDIO Power Connector : Connect the power cord.
Name and Function of the Parts AV Input Terminal L VIDEO AUDIO R S-VIDEO (MONO) AV IN 2 Video Input Terminal Audio Input Terminal S-Video Input Terminal 10
Connecting to External Devices Connecting to your PC 1. First of all, see if the computer, product and the peripherals are turned off. Then, connect the signal input cable. Rear side of the product. HDMI/DVI IN AUDIO (RGB/DVI) IN RGB(PC/DTV) IN ANTENNA IN L VIDEO AUDIO R S-VIDEO (MONO) AV1 PB PR L VIDEO COMPONENT IN A H/P AV IN 2 Y R AUDIO Connecting with the D-Sub signal input cable. RGB(PC/DTV) IN Rear side of the product.
Connecting to External Devices 3. Connect the power cord. Rear side of the product. HDMI/DVI IN AUDIO (RGB/DVI) IN RGB(PC/DTV) IN ANTENNA IN L VIDEO AUDIO R S-VIDEO (MONO) AV1 Y PB PR VIDEO COMPONENT IN 4. 1 H/P AV IN 2 L R AUDIO Turn on power by touching the Power sensor on the product. Power Sensor 2 Turn on the PC. 5. Select an input signal. Press the INPUT button on the remote control to select the input signal.
Connecting to External Devices Connecting to VCR/DVD 1. Connect the video/audio cable as shown in the figure below and then connect the power cord (See page 12). A When using the RCA cable. B When using the S-Video cable. • Connect to the S-Video input terminal to • Connect the input terminal with a watch high image quality movies. proper colour match.
Connecting to External Devices C When using the SCART cable. Rear side of the Product AV1 SCART Cable Please, use shielded scart cable. (Not Included) VCR / DVD 2. Select an input signal. Press the INPUT button on the remote control to select the input signal. INPUT OK Or, press the INPUT button at the top side of the product. INPUT OK A When connecting with a RCA cable. • Select AV2 B When connecting with a S-Video cable. C When connecting with a SCART cable.
Connecting to External Devices Connecting to Set-top Box /DVD (480p/576p/720p/1080i/480i/576i) 1. Connect the video/audio cable as shown in the figure below and then connect the power cord (See page 12). • Connect the input terminal with a proper colour match. Rear side of the Product PB Y PR L VIDEO COMPONENT IN Component Cable Audio Cable (Not included) (Not included) Y Pb Pr L VIDEO COMPONENT IN 2. R AUDIO R AUDIO Set-top Box /DVD Select an input signal.
Connecting to External Devices When watching RGB/HDMI from the DVD/Set-top Box 1. Connect the D-sub cable, RCA/PC cable as shown in the below figure and then connect the power cord. (see page 12) A B [Rear side of the Product] RGB(PC/DTV) IN [Rear side of the Product] AUDIO (RGB/DVI) IN RCA-Stereo cable (not included) HDMI cable (not included) D-Sub cable [Set-top Box/DVD] 2. [Set-top Box/DVD] Select an input signal. Press the INPUT button on the remote control to select the input signal.
Connecting to External Devices C [Rear side of the Product] AUDIO (RGB/DVI) IN RCA-Stereo cable (not included) HDMI to DVI Cable [Set-top Box/DVD] 2. Select an input signal. Press the INPUT button at the top side of the product to select the input signal.
Connecting to External Devices When Watching TV 1. Check if the antenna cable is connected at the rear side of the product and then, connect the power cord. Rear Side of the Product HDMI/DVI IN AUDIO (RGB/DVI) IN RGB(PC/DTV) IN ANTENNA IN L VIDEO AUDIO R S-VIDEO (MONO) AV1 H/P AV IN 2 Y PB PR L VIDEO COMPONENT IN R AUDIO ANTENNA IN 2. Antenna Cable (Not included.) Select an input signal. Press the INPUT button on the remote control to select the input signal.
To arrange cables using cable management 1. Arrange the cables in the center as shown in the following picture. ANTENNA IN L VIDEO AUDIO S-VIDEO R (MONO) AV1 H/P AV IN 2 Y PB PR L VIDEO COMPONENT IN 2. R AUDIO Fit the cable management to the Holder Groove downwards. L AUDIO R S-VIDEO (MONO) VIDEO AV1 H/P AV IN 2 PB Y PR L VIDEO COMPONENT IN R AUDIO PUSH GE ME CABLE MANA * When you want remove it. PUSH PUSH GE CABLE MANA ME C A B LE M A N A GE ME NT Push down slightly.
Adjusting the Screen Name of the Buttons in the Screen Adjustment Unit HDMI/DVI IN AUDIO (RGB/DVI) IN RGB(PC/DTV) IN ANTENNA IN L VIDEO AUDIO R S-VIDEO (MONO) AV1 PB PR VIDEO COMPONENT IN INPUT MENU OK Power Indicator Power Sensor MENU Button OSD Select/Adjust Button H/P AV IN 2 Y L R AUDIO VOL PR • This Indicator lights up blue when the display operates normally (On Mode). If the display is in Sleep (Energy Saving) Mode, this indicator colour changes to amber.
Adjusting the Screen Name of the Buttons in the Screen Adjustment Unit OK Button INPUT Button • OK button is usually used in choosing the MENU. When there is no MENU on the screen pushing the OK button will give the information about the current input source.
Adjusting the Screen OSD (On Screen Display) Menu Icon Function Description Set/Select the channel when using the TV Station Adjusting the picture function. Picture Adjusting the sound function. Sound Adjusting the time function. Time Selecting the special function. Special Adjusting the screen function. Screen Note OSD(On Screen Display) The OSD function enables you to adjust the screen status conveniently since it provides graphical presentation.
Adjusting the Screen OSD (On Screen Display) Screen Tracking Order PR PR MENU VOL OK VOL VOL OK VOL OK MENU PR PR Pop up the menu screen OK Move where you want to adjust Select a menu icon Adjust the status Save adjustment Exit from the menu screen. • Use the remote control to adjust the OSD screen. 1 Press the MENU Button, then the main menu of the OSD will appear. 2 To access a control, use the 3 When the icon you want becomes highlighted, press the OK Button.
Adjusting the Screen On-Screen Menu Language / Country Selection Installation guide menu appears on product screen when it is turned on for the first time. Installation guide Language Chesky Dansk Deutsch English Español Français Italiano Magyar Nederlands Norsk Polski Português –”——K»… Romaneste suomi Svenska OK MENU 1. Press the button and then, OK button to select your desired language. 2. Press the button and then, OK button to select your country.
Adjusting the Screen STATION ID set/Select the channel when using the TV Auto programme Station Auto programme Manual programme Programme edit Favourite programme To set OK MENU System It should be set before run auto searching. Press the buttons to select the TV system of the country or part of the world from where you want to receive the TV channels. * Supporting channel : C(V/UHF 02~69) S(Cable 01~41) BG : PAL B/G, SECAM B/G (Europe/East Europe) I : PAL I/II (U.
Adjusting the Screen STATION ID set/Select the channel when using the TV Press the buttons to select VHF/UHF for aerial channels or Cable for cable channels. To select the channel reception type. : VHF/UHF / Cable. Band Channel If you know the channel number, enter it directly with the digit buttons 0 to 9. Fine In case of poor reception, you can improve the reception by fine tuning. Use the buttons to fine tune for the best picture and sound. Search Use the Name To see the assigned channel name.
Adjusting the Screen STATION ID set/Select the channel when using the TV Favourite programme Station Auto programme Manual programme Programme edit Favourite programme Off __ __ __ __ __ __ __ __ _____ _____ _____ _____ _____ _____ _____ _____ OK MENU This function lets you select your favourite programmes directly. (8 channel) Press the buttons to select a channel.
Adjusting the Screen PICTURE ID adjust the picture function(RGB-PC, HDMI-PC) PSM PSM CSM XD Cinema Reset < Picture Dynamic Standard Mild Game User OK MENU The PSM function automatically adjusts the screen image quality. • Dynamic Select this option to display with a sharp image. • Standard The most general and natural screen display status. • Mild Select this option to display with a mild image. • Game Select this option to enjoy dynamic image when playing a game.
Adjusting the Screen PICTURE ID adjust the picture function (TV/Video/Component/RGB-DTV/HDMI-DTV) PSM PSM CSM XD Cinema Reset < Picture Dynamic Standard Mild Game User OK MENU The PSM function automatically adjusts the screen image quality. • Dynamic Select this option to display with a sharp image. • Standard The most general and natural screen display status. • Mild Select this option to display with a mild image. • Game Select this option to enjoy dynamic image when playing a game.
Adjusting the Screen SOUND ID to adjust the sound function SSM AVL Balance < Sound 0 Flat Music Movie Sports User OK MENU SSM The best sound tone quality will be selected automatically depending on the video type that you're currently watching. • Flat : The most commanding and natural audio. • Music : Select this option to enjoy the original sound when listening to the music. • Movie : Select this option to enjoy sublime sound. • Sports : Select this option to watch sports broadcasting.
Adjusting the Screen TIME ID to adjust the time function Time Clock Off time On time Auto sleep -- : -- OK MENU Clock This function is used to set up of current time. You must set the time correctly before using On/Off time function. 1) Press the MENU button and then use button to select the TIME menu. button to select the Clock menu. 2) Press the button and then use button and then use button to set the hour(00~23). 3) Press 4) Press button and then use button to set the minutes(00~59).
Adjusting the Screen SPECIAL ID to Select the special function Special Language Country Child lock DDC-CI XD Demo OK MENU Language To choose the language in which the control names are displayed. Country Please select your local teletext language. If you don't, the teletext may not appear correctly on the screen. This feature is not available in all countries. Child lock Use the buttons to select On or Off. It can be set up so that it can only be used with the remote control.
Adjusting the Screen SCREEN ID to adjust the screen function Screen Auto config. Manual config. ARC Reset To set OK MENU Auto config. This button is for the automatic adjustment of the screen Position, Clock and Phase. (It is not working in RGB-DTV, HDMI.) Manual config. This button is for the manual adjustment of the screen Position, Clock and Phase. • H-Position (It is not working In HDMI-PC mode.) To move the displayed image left or right. • V-Position (It is not working In HDMI-PC mode.
Troubleshooting No image is displayed ● Is the product's power cord connected? • Check if the power cord is properly connected to the outlet. ● Is the power indicator turning on? • See if the power switch is turned on. ● Power is on, power indicator is blue but the screen appears extremely dark. • Adjust brightness and contrast again. ● Does the power indicator look amber? • If the product is in power saving mode, move the mouse or press any key.
Troubleshooting The screen image looks abnormal. ● Is the screen position wrong? • Adjust the Position menu in OSD . • See if the video card resolution and frequency are supported by the product. If the frequency is out of range, set to the recommended resolution in the Control Panel – Display – Setting menu. ● Do thin lines appear on the background screen? • Adjust the Clock menu in OSD. ● Horizontal noise appears or the characters look blurred. • Adjust the Phase menu in OSD.
Troubleshooting The audio function does not work. ● No sound? • Check if the audio cable is connected properly. • Adjust the volume. • Check if the sound is set properly. ● Sound is too low. • Adjust the volume. The TV function does not work. ● The TV signal is not being received. • See if you have selected the proper channel mode. • Use the automatic channel setup function. • Check if the TV antenna is properly connected. Screen colour is abnormal. ● Screen has poor colour resolution (16 colours).
Specifications The product specifications can change without prior notice for product improvement. LCD Panel Screen Type 20.1 inches Wide (51.113 cm) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel Visible diagonal size: 51.113 cm 0.258 mm Pixel Pitch Video Signal Max.
Specifications PC Mode – Preset Mode Preset mode 1 2 3 4 5 6 7 8 9 10 720 x 400 640 x 480 640 x 480 800 x 600 800 x 600 1024 x 768 1024 x 768 1152 x 864 1280 x 1024 1280 x 1024 Horizontal Frequency (kHz) Vertical Frequency (Hz) 31.468 31.469 37.500 37.879 46.875 48.363 60.123 67.500 63.981 79.976 70 60 75 60 75 60 75 75 60 75 Preset mode 11 12 1 2 3 4 5 6 7 8 9 720 x 480/60p 720 x 480/60p 720 x 576/50p 1280 x 720/50p 1280 x 720/60p 1280 x 720/60p 1920 x 1080/60i 1920 x 1080/60i 1920 x 1080/50i 64.
Specifications VESA wall mounting This product meets VESA-compliant mounting interface pad specifications. 1. Put the product on a piece of cloth or other soft surface with the front side facing downward. 2. Please pull and remove the stand base while pressing the button on the stand body in the direction of the arrows. 3. Please put the stand body up.
Specifications 4. Please pull and remove the stand body while sliding and holding the latches down. 5. Fasten the screw on the backside of the product and the other one in the joint of the stand. 6. Install the VESA standard wall mounting. HDMI/DVI IN VESA wall mounting Connected to another object (stand type and wallmounted type). This product accepts a VESA-compliant mounting interfacepad. (This has to be purchased separately if required.
