Use and Care Manual

14
OPERATION
Changing Oven Settings
Clock
The clock must be set to the correct time of day in
order for the automatic oven timing functions to work
properly.
1
Touch Clock. The display shows CLO in red.
2
Touch the numbers to enter the time. For
example, to set the clock for 10:30, touch the
numbers: 1, 0, 3 and 0.
3
Touch Start.
NOTE
•
The time of day cannot be changed during a
timed baking or self-clean cycle.
•
To check the time of day when the display is
showing other information, touch Clock.
•
If no other keys are touched within 25 seconds
of touching Clock, the display reverts to the
original setting.
•
If the display time is blinking, you may have
experienced a power failure. Reset the time.
Timer On/Off
The Upper or Lower Timer On/Off serves as an extra
timer in the kitchen that beeps when the set time has
run out. It does not start or stop cooking.
The Upper or Lower Timer On/Off feature can be
used during any of the other oven control functions.
The Upper and Lower Timer can be operated
independently of each other.
Setting the Timer
For example, to set 5 minutes
1
Touch Upper Timer On/Off or Lower Timer On/
Off once.
0:00 appears and Timer flashes in the display.
2
Touch 5.
0:05 appears in the display.
3
Touch Timer On/Off to start the Timer. The
remaining time countdown appears in the
display.
NOTE
If Upper Timer On/Off or Lower Timer On/Off is
not touched, the timer returns to the time of day.
4
When the set time runs out, End shows in the
display. The indicator tones sound every 15
seconds until Upper Timer On/Off or
Lower Timer On/Off is touched.
NOTE
•
If the remaining time is not in the display, recall
the remaining time by touching Upper Timer
On/Off or Lower Timer On/Off.
•
Touch Upper Timer On/Off or Lower Timer
On/Off twice to set the time in minutes and
seconds.
•
Touch Upper Timer On/Off or Lower Timer
On/Off once to set the time in hours and
minutes.
Canceling the Timer
1
Touch Upper Timer On/Off or Lower Timer
On/Off once.
The display returns to the time of day.