Troubleshooting Guide

69TROUBLESHOOTING
ENGLISH
Noises
Range is not level. Poor installation.
vel on the oven rack. Adjust leveling legs at
base of range until the oven rack is level.
able enough to adequately support range.
t a carpenter to correct the situation.
Kitchen cabinet alignment may make range appear unlevel.
sufficient room for range clearance.
Cannot move
appliance easily.
Appliance must be
accessible for
service.
Cabinets not square or are built in too tightly.
to make appliance accessible.
Carpet interferes with range.
Anti-tip device engaged.
to move the range. Reengage the anti-tip device after pulling
the range out for cleaning, service, or any other reason.
Convection fan
stops. (During
Conv.Bake mode)
Convection fan stops during a convection bake cycle. It is done to allow for more even
heating during the cycle.
Fan operation
(During Bake Mode)
This is to ensure even baking results.
throughout a normal bake cycle in the oven.
Problem Possible Cause & Solution
This is the sound of the metal heating and cooling during both the cooking and Self
Clean functions.
Fan noise A convection fan may automatically turn on and off.
When lighting just
one burner, clicking
noise is heard from
all the burners.
Electric spark igniters from the burners cause the clicking noise. All the spark igniters
on the cooktop will activate when igniting just one burner.
Problem Possible Cause & Solution