Installation Guide

Assembling the Mounting Bracket, Diffuser, and

Vent Hose

1. Use a pliers to extend the first four or five

accordioned folds at both ends of the vent hose.

2. To attach the mounting bracket to one end of the

vent hose, insert the extended folds on one side

of the vent hose between the ridges inside one

side of the mounting bracket.

3. Use a pliers to pull the folds on the opposite side

of the vent hose up and between the ridges

inside the opposite side of the mounting bracket.

4. Tug the mounting bracket to make sure it is

securely attached to the vent hose.

5. To attach the diffuser to the other end of the vent

hose, use a Phillips screwdriver to remove the

four screws holding the grill on the end of the

diffuser. Set the grill and screws aside.

6. Insert the vent hose in the round end of the

diffuser in the same manner as assembling the

hose to the mounting bracket. (See steps 2 and

3.)

7. Tug the diffuser to make sure it is securely

attached to the vent hose.

8. Reattach the grill on the diffuser, using the four

screws removed in step 5.

Attach the hose assembly onto the back of

the air conditioner by inserting the edges of

the mounting bracket behind the tabs at the

top and bottom and sliding the mounting

bracket to the left until it snaps into place.

Unlock

Lock

COV34636801 2017. 12. 1. 오후 6:32 페이지 14