Use and Care Manual

23
CARE AND CLEANING
Drain
outlet
English
Filter
case
English
EMPTYING THE WATER COLLECTION TANK
When the internal water collection tank is full, FL
will appear in the display and the air conditioner
will turn off until the tank is emptied.
Unplug the air conditioner, disconnect
the exhaust hose from the back, and move
the air conditioner to a suitable drain
location or outdoors. You may also place
a pan under the drain that will hold up
to 1.3 pints of water.
Remove the drain cap and the rubber plug
from the drain outlet.
Once the water collection tank is drained,
reinstall the rubber plug a
nd the
drain cap,
making sure it is
on securely.
Place the air conditioner in the desired
location, reconnect the exhaust hose, and
plug in the air conditioner.
When need running in high humidity, or during the DRY mode remove the drain cap and the
rubber plug from the back of the unit.
NOTES:
When turned on after being unplugged, the air conditioner will automatically reset to
COOL mode, with a temperature setting of 72°F.
2
1
3
4
USING THE DRAIN OUTLET
1
Install a drain hose (1/2" inside diameter) and place the open end of the hose a suitable
drain location or outdoors.
2
It is recommended to fasten the drain hose with clamp to
secure not drain water leak.
You have to remove the filter case when fasten the clamp.
FL apperars in the display
The water collection tank is full, drain the tank and restart the air conditioner.
NOTICE
When operating or draining water always protect carpeting or floors from
possible water spillage
When you do drain the water, it can be wet on the floor or Unit, then you
should wipe with dry cloth or towel.
NOTICE
NOTICE
USE DRAIN HOSE WHEN USE THE DRY MODE
Clamp
Rubber
plug
Drain
cap