LH-WH7695IA_NA3GLLD_ENG_MFL42158353 Wireless HDD/DVD Recorder Receiver System OWNER’S MANUAL MODEL:LH-WH760IA (Main Unit: LH-WH760 Speakers: LHS-W76IA5S, LHS-W76IA5C, LHS-W76IA5A, ACC96R, ACC96T) USB Before connecting, operating or adjusting this product, please read this instruction booklet carefully and completely.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: THESE SERVICING INSTRUCTIONS ARE FOR USE BY QUALIFIED SERVICE PERSONNEL ONLY. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING OTHER THAN THAT CONTAINED IN THE OPERATING INSTRUCTIONS UNLESS YOU ARE QUALIFIED TO DO SO. Caution: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus.
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-9 Symbol Used in this Manual . . . . . . . . . . . . . . . .4 Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . .4 Recordable and Playable Discs . . . . . . . . . . . . .5 Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . .6 Regional Code . . . . . . . . . . . . . . . . . . . . . . . . . .6 Availability of copying or moving feature . . . . . . .6 About the internal hard disk drive . . . . . . . . . . . .
Introduction To ensure proper use of this product, please read this owner’s manual carefully and retain for future reference. This manual provides information on the operation and maintenance of your recorder. Should the unit require service, contact an authorized service location. Symbol Used in this Manual The lightning flash symbol alerts you to the presence of dangerous voltage within the product enclosure that may constitute a risk of electric shock.
Introduction Recordable and Playable Discs DVD-RW (Digital Video Disc - ReWritable): DVD-RW discs can be formatted for VR mode recording or Video mode recording. These Discs can be recorded on repeatedly. Recordings can be erased, then you can record again on the same Disc.
Playable Discs DVD (8 cm / 12 cm disc) Discs such as movies that can be purchased or rented Audio CD (8 cm / 12 cm disc) Music CDs or CD-Rs/CD-RWs in music CD format that can be purchased CD-R/CD-RW (8 cm / 12 cm disc) CD-R/CD-RW discs that contain audio titles, DivX, MP3, WMA, or JPEG files. Notes: – Depending on the conditions of the recording equipment or the CD-R/RW (or DVD±R/RW) disc itself, some CD-R/RW (or DVD±R/RW) discs cannot be played on the unit.
Playing media files using the USB host feature The internal hard disk drive (HDD) is a fragile piece of equipment. Please use the recorder following the guidelines below to protect against possible HDD failure. We recommend that you back up your important recordings onto DVD discs in order to protect against accidental loss.
Front Panel a b i a POWER Switches the HDD/DVD Recorder Receiver ON or OFF. b Display window Shows the current status of the recorder. REC: The recorder is recording. HDD: The recorder is HDD mode. DVD: The recorder is DVD mode. DVD b B HDD : The recorder is dubbing. MUTE: The speaker sound is muted. , disc. D : Indicates encoding format of the current PLII : Indicates sound mode is DOLBY PRO LOGIC or DOLBY PRO LOGIC II.
POWER OPEN/CLOSE Turns HDD/DVD Recorder Receiver ON and OFF. Opens and closes the disc tray. AV FM/AM Tuner select Changes the input to use for recording. (Tuner, AV1, AV2, OPT, AV 3, AV4 or DV). Select FM or AM band as the listening choice. (FM and AM bands). PIP HOME Selects PIP function on or off. Accesses or removes the HOME menu. TEST TONE 0-9 numerical buttons To adjust the sound balance of the speakers from the listener's position. Selects numbered options in a menu.
Hookup and Settings Rear Panel a b c d e f g h i ANT.IN SCART j k l m n a ANT.IN Connect the aerial to this terminal. i AC Power Cord Plug into the power source. b HDMI Connector (Type A) HDMI output providing a high quality interface for digital audio and video. j RF. OUT Passes the signal from the AERIAL to your TV/monitor c EURO AV 2 DECODER Connect the audio/video output of an external source (Pay-TV decoder, Set Top Box, VCR, etc.). k S-VIDEO OUT Connect to a S-Video Input on TV.
Video connection Make one of the following connections, depending on the capabilities of your existing equipment. When using the COMPONENT/PROGRESSIVE SCAN VIDEO OUT jacks, set the VIDEO OUT SELECT switch to COMPONENT. When using the SCART jack, set the VIDEO OUTPUT SELECT switch to SCART. Tips Depending on your TV and other equipment you wish to connect, there are various ways you could connect the recorder. Use only one of the connections described below.
HDMI connection HDMI compatible TV HDMI If you have a HDMI TV or monitor, you can connect it to this recorder using a HDMI cable. 1. Connect the HDMI jack on the recorder to the HDMI jack on a HDMI compatible TV or monitor (H). H 2. Set the TV’s source to HDMI (refer to TV’s Owner’s manual). Notes: The arrow on the cable connector body should face up for correct alignment with the connector on the recorder.
Accessory Audio/Video (A/V) Connections TV VCR, Cable Box, or Satellite Tuner, etc. Connecting a PAY-TV/Canal Plus Decoder Hookup and Settings You can watch or record PAY-TV/Canal Plus programmes if you connect a decoder (not supplied) to the recorder. Disconnect the recorder’s mains lead from the mains when connecting the decoder.
Connecting to the AV IN 3 or AV IN 4 Jacks Connect the input jacks (AV IN 3, AV IN 4) on the recorder to the audio/video out jacks on your accessory component, using audio/video cables. Connecting a Digital Camcorder Using the front panel DV IN jack, it is possible to connect a DV digital camcorder and digitally transfer DV tapes to DVD. Use a DV cable (not supplied) to connect the DV in/out jack of your DV camcorder to the front panel DV IN jack of this recorder.
AM GND DC 7V OUT ANTENNA FM Wireless TX Black Red DC power cable DC IN ID./CH. Connect the speakers to the front (right, left) or center speaker connectors of the Active Subwoofer Speaker. Connect the power cord of the Wireless RX to the outlet, then connect the Wireless RX and the rear speaker (right, left) with the speaker cable. Connect the DC IN connector of the Wireless TX and the Wireless TX (DC 7V OUT) connector of the Active Subwoofer Speaker with the DC power cable.
Assembling and Connecting to the Speakers 1. Connect the speaker cables to the appropriate terminals on the bottom of each front and rear speakers. LED indicator of Wireless TX * LED indicator - “BLUE” The main set is turned on, everthing is connected and transmitting. * LED indicator - “OFF (No display)” The main set is turned off. 2. Attach the front and rear speakers to the speaker stands by rotating the screw. LED indicator Displays the operating status.
Setting an ID of Wireless TX and Wireless RX If there is a similar wireless product nearby, interference may occur. In this case, change to another channel using ID/CHANNEL (ID./CH.) button of Wireless TX. When the unit is manufactured, the ID is already set. If an interference occurs or you use a new Wireless RX, an ID is set again. Manual setting 1. Set the wireless TX and wireless RX within 50cm of each other. 2. Turn the Wireless TX and Wireless RX on. 3. Press the ID/CHNNEL (ID./CH.
Speaker Positioning In the case of normal position use the 6 speakers (2 front speakers, 1 center speaker, 2 rear speakers and subwoofer). If you want to play the excellent bass sound, DTS digital surround or Dolby Digital surround, you should connect a subwoofer. • Front speakers According to your listening position set up the speakers for equal distance. And by hearing position set up the interval between speakers to 45 degree.
Delay Time Setting In Dolby Digital mode Center delay time : 0 ~ 5ms Rear delay time: 0 ~ 15ms In Dolby Pro Logic mode Center delay time : cannot be set If the rear delay time is set in Dolby Digital mode, in the Dolby Pro Logic mode the delay time will be automatically set. The delay time is 1 msec per 30 cm. If the Center and rear speakers are further than the front speakers from the listener, the delay time will be at minimum.
PANO (PANORAMA) This control extends the front stereo image to include the surround speakers for an exciting “wraparound” effect with side-wall imaging. It is particularly effective for recordings which have strong left- or right-channel elements in the mix, as these are detected and accentuated by the Panorama process. Test Tone This function allows you to can easily adjust the sound balance of the speakers from the listener's position. 1. Select the test tone mode by pressing TEST TONE.
Using the Home Menu General Operation From the Home Menu screen you can access all the Media for playback and recording of the recorder. 1. Press SETUP and the Setup menu appears. 1. Press HOME to display the Home Menu screen. 3. While the desired item is selected, press B to move to the second level. 3. Use the v / V and ENTER buttons to select the sub option you want. 4. Use v / V to select the second desired option. Hookup and Settings 2. Use the b / B buttons to select a main option you want.
Program Edit Program Edit You can edit a channel manually (add, delete, name, move, etc.). You can perform a search to select and store TV channels manually. When you select [Program Edit] in step 4 above, the display for setting channels appears. 1. Select [Program Edit] option then press B. 2. Press ENTER while [Edit] is selected. The Program List menu appears. 3. Use v / V to select a PR number then press ENTER. 4. Use v / V to select the program option then press ENTER.
AV2 Connection When Channel auto search is completed the actual Time and Date are also set automatically. If the time in the recorder display is not correct, the clock must be set manually. You can connect a decoder or other device to the EURO AV2 DECODER socket on the back. 1. Select [Clock set] option then press B. [Decoder] Select [Decoder] if you connect the recorder’s EURO AV2 DECODER jack to a PAY-TV or Canal Plus decoder.
Initialization Audio Settings You can reset the recorder to its original factory settings and initialize the HDD or USB Memory. [Factory Set] If you need to, you can reset the recorder to all its factory settings. Some options cannot be reset. (Rating, Password, and Area Code) [HDD format] Initializes the HDD (Hard Disk Drive): everything recorded on the HDD will be erased. [USB format] Initializes the USB device.: everything recorded on the Memory will be erased. 1.
Lock (Parental Control) Settings Set Password Hookup and Settings 1. Select [Set Password] option then press B. 2. Follow step 2 as shown “Rating”. To change the password, select the [Change], press ENTER and input the new 4-digit code then press ENTER. Input it again to verify. To delete the password, select [Delete] then press ENTER. If you forget your 4-digit code Rating Blocks playback of rated DVDs based on their content. Not all discs are rated. 1. Select [Rating] option then press B. 2.
Recording Settings MPEG4 When HDD recording, you can set the video recording format to MPEG2 or MPEG4. If you want to record a video with MPEG4 format, select [ON]. When this choice is made, this unit will record the video with MPEG4 format on the HDD. [OFF] For MPEG2 recording in HDD mode [ON] For MPEG4 recording in HDD mode AV2 Recording Record Mode Set You can set the picture quality for recording; XP (High Quality), SP (Standard Quality), LP (Low Quality), EP (Extend Quality).
Finalize Disc Label Finalizing ‘fixes’ the recordings in place so that the disc can be played on a regular DVD player or computer equipped with a suitable DVD-ROM drive. Finalizing a Video mode disc creates a menu screen for navigating the disc. This is accessed by pressing MENU/LIST or TITLE. Use this to enter a name for the disc. This name appears when you load the disc and when you display disc information on-screen. The disc name can be up to 32 characters long.
General Explanation of On-Screen Display This manual gives basic instructions for operating the recorder. Some DVDs require specific operation or allow only limited operation during playback. When this occurs, the symbol appears on the TV screen, indicating that the operation is not permitted by the recorder or is not available on the disc. Displaying Information While Watching TV During viewing the TV, press ENTER or DISPLAY to display/remove the information displayed on-screen.
Playback General Playback Features 1. Load your chosen disc in the tray, with the playback side down. 2. Starts playback using HOME menu (see page 21). Hookup and Settings 3. To stop the playback, press STOP (x). The unit records the stopped point, depending on the disc. “Xx” appears on the screen briefly. Press PLAY (N) to resume playback (from the scene point). If you press STOP (x) again or unload the disc (“x” appears on the screen.), the unit will clear the stopped point. 4.
General Playback Features (Continued) Buttons Operations REPEAT During playback, press REPEAT repeatedly to select a desired repeat mode. HDD (Title/Off), DVD (Chapter/Title/Off) VR mode DVD-RW (Chapter/Title/All/Off) Audio CD (Track/All/Off) MP3/WMA (Track/Folder/Off) Note: If you press SKIP (>) once during Repeat Chapter (Track) playback, the repeat playback cancels.
If a menu screen is displayed DVD Marker Search Use the b / B / v / V buttons to select the title/chapter you want to view, then press ENTER to start playback. Press TITLE or MENU/LIST to return to the menu screen. Moving to another TITLE HDD -RWVideo DivX RAM +RW -R +R -RWVR DVD When a disc has more than one title, you can move to another title as follows: Press DISPLAY twice during playback then use v / V to select the title icon.
Last Condition Memory DVD This recorder memorizes the user settings for the last disc that you have viewed. Settings remain in memory even if you remove the disc from the recorder or switch off the recorder. If you load a disc that had its settings memorized, the latest stop position is automatically recalled. Notes: Settings are stored in memory for use any time. This recorder does not memorize settings of a disc if you switch off the recorder before commencing to play it.
Playing a DivX Movie File Movie List menu options The recorder can play Divx files. Before playing DivX files, read “DivX file requirement” on right. 1. Press v / V to select a folder/file on the [Movie List] menu then press ENTER. [Movie List] menu options appear. The menu options displayed differ depending on the selected media. 1. Press HOME then select [MOVIE] option. 2. Select a media that contains DivX file(s) then press ENTER. The [Movie List] menu appears on the TV screen. 2.
Playing an Audio CD or MP3/WMA file Audio CD and Music menu options The recorder can play audio CDs and MP3/WMA files. Before playing MP3/WMA files, read “MP3/WMA audio file requirement” on right. 1. Press v / V to select a folder/file on the Audio CD or Music menu then press ENTER. The menu options appear. The menu options displayed differ depending on the selected media. 1. Press HOME. The HOME menu appears. 2. Press v / V / b / B to select an option, and press ENTER. 2. Select [MUSIC] option.
Program Playback with Audio CD and MP3/WMA file Program Playback enables you to make custom playlists of Audio CD or MP3/WMA tracks. Programs can contain up to 99 Audio CD tracks or 256 MP3/WMA files. 1. Use v / V to select a track/file (or folder) on the Audio CD or Music menu. You can select all MP3/WMA files and folders on the Music menu by pressing CLEAR button. To cancel the selections, press CLEAR again. Program List menu options 1.
Viewing a JPEG File Photo List menu options The recorder can play JPEG files. Before playing JPEG recordings, read “Photo file requirement” on right. 1. Press v / V to select a file on the [Photo List] menu then press ENTER. The menu options appear. The menu options displayed differ depending on the selected media. You can select all files and folders on the menu by pressing CLEAR button. To cancel the selections, press CLEAR again. 1. Press HOME. The HOME menu appears. 2. Select [PHOTO] option. 3.
Skip Images While viewing a picture, press SKIP (.or >) once to advance to the next file or return to the previous file. Rotate Images Use v / V while viewing a picture to flip the picture clockwise or counterclockwise. View Slide Shows 1. Select [Slide Show] option on the [Photo List] menu (Refer to “Photo List menu options” on page 36). To listen to music while slide show simultaneously You can display photo files while listening to MP3/WMA music files recorded on HDD. 1.
Editing a MP3/WMA, JPEG, DivX file These descriptions are MP3 file’s operation for example, other kind’s files are operated same way. Note: The MP3/WMA, and DivX files on the disc or HDD cannot be copied or moved to USB device. Erasing a file(s)/folder(s) from the HDD or USB device Naming a file on the HDD or USB device You can name MP3/WMA files on the HDD or USB device independently. Names can be up to 32 characters long. 1. Select a file you wish to rename on the menu. 2. Press ENTER.
Copying a file(s) to another media or folder You can copy a file(s)/folder(s) to another media or folder. 1. Select a file you wish to copy on the menu. You can select all files and folders on the menu by pressing CLEAR button. To cancel the selections, press CLEAR again. Selecting multiple files (folders) Moving a file(s) You can move a file(s)/folder(s) to another media or folder. After moving, the file(s)/folder(s) are deleted from the current location. 1. Follow steps 1-3 as shown left. 2.
Recording About DVD recording Notes: This recorder cannot make recordings on CD-R or CD-RW discs. Our company takes no responsibility for recording failure due to power outages, defective discs, or damage to the Recorder. Fingerprints and small scratches on a disc can affect playback and/or recording performance. Please take proper care of your discs. Notes: The maximum number of titles that can be recorded on the HDD is 255. Using the HDD allows you to record a maximum of 12 hours continuously.
Timeshift HDD Do not miss a scene from a live broadcast. If the telephone rings while you are watching your favorite live broadcast, just press “TIMESHIFT” and “PAUSE” before answering the phone. The timeshift function will be activated and the broadcast is then recorded for later viewing. After the phone call or viewing interruption, press “PLAY” or “SCAN” to watch the program. Press “STOP” to return to the live broadcast.
Basic Recording from a TV Follow the instructions below to record a TV program. Recording starts immediately and continues until the disc is full or you stop the recording. To Pause the Recording 1. Press PAUSE/STEP (X) to pause recording. 2. When you want to continue recording, press PAUSE/STEP (X). Note: You must load a recordable disc for DVD recording. To record one TV program while watching another 1. Press HOME. The HOME menu appears. 1. Press TV/DVD to select the TV mode during recording.
This recorder can be programmed to record up to 16 programs within a period of 1 month. For unattended recording, the timer needs to know the channels to be recorded, the starting and ending time. 2. Enter the necessary information for your timer recording(s). Note: If you use a completely blank disc for timer recording, you must format the disc before starting timer recording. (Refer to “Disc Format” on page 26.) 1. Press TIMER REC. The Timer Record menu will appear.
Timer Recording with SHOWVIEW® System This system makes programming timer recordings very simple. Most TV guides publish SHOWVIEW programming numbers with their program details.If you want to make a timer recording of a program, you just input the corresponding SHOWVIEW programming number. The date, start, stop and channel settings are made automatically. All you have to do is tell the recorder the recording mode, and whether it’s a onceonly recording, or a regular recording.
Checking Timer Recording Details Programming can be checked whenever the recorder is turned on. Press TIMER REC twice. Use v / V to select a timer recording. Press ENTER to edit the selected program. Timer Record menu appears. Press CLEAR to delete the selected program from the Timer Record List. If two or more timer programs overlap: The earlier program takes priority. When the earlier program finishes, the later program starts.
Recording from DV Input 1. Make sure your digital camcorder is connected to the front panel DV IN jack. See page 14. Before DV dubbing 2. Select [TV HDD] or [TV DVD] option on the HOME menu then press ENTER. (see page 21). You can connect a DV-equipped camcorder to this recorder using a single DV cable for input and output of audio, video, data and control signals. This recorder is only compatible with DV-format (DVC-SD, DV25) camcorders.
Simultaneous recording and playback MPEG4 Recording Playback another title during recording 1. Set the [MPEG4] option to [ON] on the setup menu (See page 26). Playback and recording for both DVD and built in hard disk drive (HDD) are completely independent. For example, you can record to either the DVD or HDD source and play back video from the other source at the same time. 2. Select input source you want to record (TV channel, AV input, etc). 2. Press HOME to display the Home Menu screen. 3.
Editing 12 3 4 5 6 7 Title List and Chapter List Menu Overview Using the Title List menu you can edit video content. The editing features available in the Title List menu depend on whether you are editing video on DVD, or the HDD, and whether you’re editing Original content, or a Playlist. There are two ways to edit VR mode DVD-RW discs. You can directly edit the Original content of the disc, or you can create and edit a Playlist.
Titles, Chapters and Parts Titles in the disc’s original content contain one or more chapters. When you insert a disc’s title into the Playlist, all the chapters within that title also appear. In other words, chapters in the Playlist behave exactly as chapters on a DVD-Video disc do. Parts are sections of Original or Playlist titles. From the Original and Playlist menu you can add or delete parts. Adding a chapter or title to the Playlist creates a new title made up of a section (ie.
Making a New Playlist -RWVR RAM Use this function to add an Original title or chapter to the Playlist. When you do this, the whole title is put into the Playlist (you can delete bits you don’t need later — see Deleting an Original or Playlist title/chapter on page 51). The title appears in the Playlist complete with the chapter markers that appear in the Original. However, if you add more chapter markers to the Original later, these are not automatically copied over into the Playlist title.
Deleting an Original or Playlist Title/Chapter When you erase a title or chapter from the Playlist menu, you only remove it from the Playlist; the title/chapter remains in the Original menu. If you choose to delete a title or chapter from the Original (title/chapter) menu, the title or chapter is actually deleted from the disc and the remaining time available for recording increases. Titles/chapters deleted from the Original are also removed from the Playlist.
Naming a Title You can name Original and Playlist titles independently. Names can be up to 32 characters long. 1. Choose the title you want to name on the Title List menu, then press ENTER. The menu options appears on the left side of the menu. 2. Use v/V to select [Rename (Title Name)] option then press ENTER. Keyboard menu appears. Time Search RAM +RW -R HDD -RWVR -RWVideo +R You can select start point of the title. 1. Use b / B / v / V to choose a title on the Title List menu then press ENTER.
Sort HDD This function allows you to access show listings organized by Date, Title, or Category on the Title ListHDD menu. So you can find title you want to watch easily. 1. Choose any title on the Title List-HDD menu, then press ENTER. The menu options appears on the left side of the menu. 2. Use v/V to select [Sort] option then press ENTER. Sort options appears. Combining Two Titles Into One HDD Use this function to combine two adjacent OriginalHDD titles into one.
Divide One Titles Into Two HDD +RW Combining Two Chapters Into One HDD -RWVR +RW +R RAM Use this command to split a title up into two new titles. Use this function to combine two adjacent Playlist or Original chapters into one. 1. On the Title List menu, select a title you want to divide then press ENTER. The menu options appears on the left side of the screen. Note: This function is not available if there is only one chapter within the title. 1.
-RWVR RAM Use this function to re-arrange the playing order of Playlist chapters on the Title List-Playlist menu. Note: This function is not available if there is only one chapter. 1. Select a chapter on the Chapter List-Playlist menu. 2. Press ENTER. The menu options appears on the left side of the menu. 3. Use v / V to select [Move] option from Playlist options then press ENTER. 4. Use b / B / v / V to choose the place you want to move the chapter to then press ENTER.
rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only, unless otherwise authorized by Macrovision corporation. Reverse engineering or disassembly is prohibited. Dubbing Before Dubbing Use the copying features of this recorder to: Back up important recordings stored on the HDD to a DVD. Make a DVD copy of a recording on the HDD to play in another player.
Dubbing from HDD to DVD Dubbing from DVD to HDD 1. On the Title List-HDD menu, select a title you want to dub then press ENTER. The menu options appears on the left side of the screen. 1. On the Title List menu, select a title you want to dub then press ENTER. Menu options appears on the left side of the screen. 2. Use v / V to select [Dubbing] option then press ENTER. Dubbing menu appears. 3. Use b / B to select record mode (XP, SP, LP, EP, or Fast), then press V. ‘Start’ icon is highlighted.
One Touch Copy (HDD to DVD) The One Touch Copy feature copies the currently playing title from the HDD to DVD. The whole title is copied, regardless of where in the title you start copying. The recorder copies at the maximum speed possible. For One Touch Copy to work, make sure that a recordable DVD disc is loaded. During HDD playback, press DUBBING to copy the current title to DVD. The on-screen display indicates that the title is being copied. Playback continues while copying.
Reference Additional Information Overwriting Recording +RW 2. Press TITLE in Play or stop mode. Title List menu will appear as shown below. Tip You can remove the Title List menu by pressing STOP (x). To overwrite a new video recording on a previously recorded title, follow these steps. This feature is not available for DVD+Rs, that always record at the end of the Disc. 1. Select input source you want to record (TV channel, AV1-4, DV). 2. Press MENU/LIST to display the Title List menu. 3.
Language Codes Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.
Presetting the Radio Stations Listening to the Radio You can preset 50 stations for FM and AM (MW). Before tuning, make sure that you have turned down the volume. Preset radio stations in the unit’s memory first (see “Presetting radio stations” on the left). 1. Press FM/AM on the remote control until FM or AM (MW) appears in the display window. 2. And then every time you press FM/AM, FM and AM (MW) changes alternately. 3. Press and hold TUN.- b or TUN.
RDS Operation Programme Search (PTY) This unit is equipped with RDS (Radio Data System), which brings a wide range of information to FM radio. Now in use in many countries, RDS is a system for transmitting station call signs or network information, a description of station programme type text message about the station or specifics of musical selection and the correct time.
Troubleshooting Check the following guide for the possible cause of a problem before contacting service. Cause Solution The power cord is disconnected. Plug the power cord into the wall outlet securely. No picture. The TV is not set to receive recorder signal output. Select the appropriate video input mode on the TV so the picture from the recorder appears on the TV screen. The video cable is not connected securely. Connect the video cable securely.
Cause Symptom Cannot play a disc recorded using this recorder on another player. Cannot record or did not record successfully. Timer recording is not possible. Stereo Audio Record and/or Playback is not present. The remote control does not work properly. The disc was recorded in Video mode. Finalize the disc. (page 27) Some players will not play even a finalized disc recorded in Video mode. No solution.
Specifications General Power requirements Power consumption Dimensions (approx.) Mass (approx.) Operating temperature Operating humidity Television system Recording format AC 200-240V, 50/60 Hz 35W 440 X 55 X 280 mm (w x h x d) without foot 4.
Amplifier Stereo mode Surround mode (* Depending on the sound mode settings and the source, there may be no sound output.
P/NO : MFL42158353
