Quick start guide

6
Installing the memory card
To store multimedia files, such as pictures taken using the camera, to an SD card, you must insert a memory card
into your phone.
1 Use the fingertip cutout to remove the back cover.
2 Insert the memory card into the slot. Make sure the gold contact area is facing downwards.
NOTE
The memory card is sold separately.
Warning!
Do not remove the memory card without first unmounting it using the Storage menu. Otherwise the memory card, as well as
your phone, may become damaged and the data stored on the memory card may get corrupted. To unmount the memory card
safely, tap Apps > Apps tab > Settings > General tab > Storage > Unmount SD card.
Charging your phone
A rechargeable Li-ion battery is used to power your phone.
A USB Adapter, which is included with your phone, is used to charge the battery.
Before using your phone for the first time, make sure the battery is fully charged. An uncharged battery will fully
recharge after 3 hours.
USB Adapter
USB Cable
NOTE
Make sure the battery is installed before connecting the USB Adapter. If the battery is not installed and the USB Adapter is
connected, the phone will not operate properly due to prolonged power cycling. Also, removing the battery with the USB
Adapter connected may damage the device. Please unplug the USB Adapter before removing the battery.
Warning!
If the touch screen does not function while the phone is in the process of charging, it may be due to an unstable power supply.
As a result, disconnect the USB cable from the device or unplug the USB Adapter from the power outlet.