User guide

30 Troubleshooting

Troubleshooting

Symptoms Solution

The power does not

turned on./ The unit

doesn’t operate.

• Con rm once more that all connections are correct.

• Rectify the problem that caused the fuse to blow, and then

replace it. Be very sure to install the correct fuse with the

same rate.

• Turn the unit o and then on again.

There is no sound or the

sound is distorted.

• The unit is in scan, slow motion, or pause mode.

• The sound volume is low.

• Connect the cables correctly. (page 15)

There’s audio skipping. • Secure this unit  rmly.

The unit does not start

playback.

• Insert a playable disc. (Check the disc type, colour system,

and regional code.)

• Place the disc with the playback side down.

• Clean the disc.

• Cancel the rating function or change the rating level.

Radio stations cannot be

tuned in properly.

• Tune to stations manually.

• Preset some stations.

The remote control does

not work properly.

• The remote control is not pointed at the remote sensor of

the unit.

• The remote control is too far from the unit.

• There is an obstacle in the path of the remote control and

the unit.

• Load a new battery.

Troubleshooting