User guide

27Operation
4
Operation
REG (Region)
[ON]
The unit switches to another station, within
the same network, broadcasting the same
program when the receiving signals from
the current station become weak.
[ OFF]
The unit switches to another station, within
the same network when the receiving
signals from the current station become
weak. (In this mode, the program may di er
from the one currently received one.)
TA( Tra c Announcement)
[Alarm]
When the tuned station has no TP
information for 5 seconds, a double beep
sound is output.
[Seek]
When the tuned station does not receive
TP information for 5 seconds, the receiver
retunes to the next station that has the TP
information.
PI (Programme Identi cation)
[Sound]
When the frequency of a tuned station
switches to an AF(Alternative frequency)
with an unidenti ed PI, it keeps the sound.
[Mute]
When the frequency of a tuned station
switches to an AF with an unidenti ed PI, it
mutes the sound until the PI is identi ed.
CT (Clock Time)
You can use the RDS CT information to
update the time. When RDS CT information
is not received and then you set CT to OFF,
you can adjust the time by yourself. Refer to
the page 20 for setting the clock.
Enjoying music or
movie by connecting
an external device
You can enjoy music or movie  les of an
external device by connecting it to the unit.
1. Connect an external device to the AUX jack
with line input cable.
2. Select AUX by pressing SRC.
3. Play the connected Auxiliary Equipment.
4. Rotate the volume knob on the unit or
press VOL.+/- on the remote control.
Preventing radical changes in
volume as switching sources
You can adjust the volume level of each source
to prevent radical changes in volume by
adjusting AUX Input Gain.
1. Press MENU.
2. Press the volume knob (LIST/ENTER on the
remote control) repeatedly to select AUX
Input Gain from -6 dB to +6 dB.
3. Press
(RETURN on the remote control)
to return to the previous menu.