User guide

Operating 15
Operating
3
For [OTHER] setting

AUX (Auxiliary) ON / OFF
It is possible to use auxiliary equipment with this
unit. Activate the auxiliary setting when using
auxiliary equipment connected to this unit.

DEMO OFF / ON
You can change the initial indication on the
display to information name (function name, EQ
name, etc...) while listening to a source.

BEEP 2ND / ALL
BEEP 2ND : The beep is generated when a key is
pressed for longer than 2 seconds.
BEEP ALL : The beep is generated when any key
is pressed.

CLK (Clock)
For the model RDS is not supported unit or even
for a RDS supported unit.
- When RDS CT information is not received and
then you set CT to OFF, you can adjust the
time by yourelf. Set the clock as follows ;
1. Select a source to TUNER.
2. Press the
F
to select the CT and then set
CT to OFF.
(Refer to the " Adjusting TUNER settings " on
the page 19 for setting the CT (Clock Time)
ON / OFF.)
3. Press and hold
`
on the unit to select
[OTHER] and then select CLK by rotating the
volume knob.
4. Set the hour by rotating the volume knob.
5. Press the volume knob to con rm the hour.
6. Set the minute by rotating the volume knob.
7. Press the volume knob to con rm the
minute.
- When RDS CT information is received ;
The clock is displayed according to the RDS CT
information.
- When RDS is not supported, set the clock
according to 3 to 7 steps.
Listening to a CD
[LCS710BR / LCS710DAB]
1. Insert a CD.
2. Rotate the volume knob on the unit to adjust
the volume.
Or press VOLUME
W
/
S
on the remote control.
[LCF810BR / LCF810DAB]
1. Press the OPEN to open the control panel.
2. Insert a CD.
3. Close the control panel.
4. Rotate the volume knob on the unit to adjust
the volume.
Or press VOLUME
W
/
S
on the remote control.
Make sure to press
B
after pressing OPEN to
eject a disc. Refer to the picture above.
,
Note
Pausing or restarting CD
playback
1. Press
N
on the unit to pause playback.
Or press
d/M
on the remote control.
2. Press it to resume playback.
Searching for a section within
a track / fi le
1. Press and hold
A
/
D
on the unit for about 1
second during playback.
Or press and hold
c
/
v
on remote control.
2. Press
N
on the unit at the point you want.
Or press
d/M
on the remote control.