User guide

Operating12
Operating
3
For [OTHER] setting

AUX (Auxiliary) ON/ OFF
It is possible to use auxiliary equipment with this
unit. Activate the auxiliary setting when using
auxiliary equipment connected to this unit.

BEEP 2ND/ ALL
BEEP 2ND: The beep is generated when a key is
pressed for longer than 2 seconds.
BEEP ALL: The beep is generated when any key is
pressed.

A-EQ (Auto EQ) ON/ OFF
AUTO EQ operates only in the music  le
supported with genre in the device. When you
set AUTO EQ to ON, POP, CLASSIC, ROCK, or JAZZ
is automatically selected according to the music
genre.

SW (Subwoofer) OFF/ SW 55 Hz/ SW 85 Hz/ SW
120 Hz
You can enable the subwoofer.
SW OFF <-> SW 55 Hz <-> SW 85 Hz <-> SW 120
Hz.

DEMO OFF/ ON
You can change the initial indication on the
display to information name (function name, EQ
name, etc...) while listening to a source.

CLK (Clock)
For the model RDS is not supported unit or even
for a RDS supported unit.
- When RDS CT information is not received and
then you set CT to OFF, you can adjust the time
by yourself. Set the clock as follows ;
1. Select a source to TUNER.
2. Set CT to OFF.
( Refer to the " Adjusting TUNER settings " on
the pages
16 for setting the CT (Clock Time)
ON/ OFF.)
3. Press
`
on the unit to select [OTHER] and
then select CLK by rotating the volume
knob.
4. Set the hour by rotating the volume knob.
5. Press the volume knob to con rm the hour.
6. Set the minute by rotating the volume knob.
7. Press the volume knob to con rm the
minute.
- When RDS CT information is received ;
The clock is displayed according to the RDS CT
information.
- When RDS is not supported, set the clock
according to 3-7 steps.
Listening to a CD
1. Insert a CD.
2. Rotate the volume knob on the unit to adjust
the volume.
Or press VOLUME
W
/
S
on the remote control.
Pausing or restarting CD
playback
1. Press
N
on the unit to pause playback.
Or press
d
/
M
on the remote control.
2. Press it to resume playback.
Searching for a section within
a track/ fi le
1. Press and hold / on the unit for about 1
second during playback.
Or press and hold
c
/
v
on remote
control.
2. Press
N
on the unit at the point you want.
Or press
d
/
M
on the remote control.