ENGLISH DEUTSCH FRANÇAIS ESPAÑOL ITALIANO Please read this manual carefully before operating your set and retain it for future reference.
Getting Started Safety Information 1 CAUTION Getting Started RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Getting Started Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM. Disposal of your old appliance 1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. 1 2.
Table of Contents Table of Contents 1 2 1 Getting Started 2 5 6 6 7 7 7 Safety Information Front panel Remote control (OPTIONAL) – Battery Installation About detachable control panel – Attaching the control panel – Detaching the control panel 2 Connecting 8 8 8 8 9 9 Installation – Basic Installation – Removing the existing receiver unit – ISO-DIN Installation Connection – Connecting to a car 3 4 5 3 Operating 10 10 10 10 10 15 15 15 16 17 17 17 17 Operation – Basic operations – Turning
Getting Started 5 Front panel a c d e l m n f g hi 1 Getting Started b jk a SRC/ • OFF • When pressed, selects function sources. • When pressed and held, powers unit on or off. b Returns to the previous step. c Volume knob • Adjusts volume level. • Confirms the settings. • Checks tracks, files or preset stations. d BAND Selects a band in Tuner mode. • TA (OPTIONAL) Searches stations that have TA/ TP information, when it is pressed and held.
Getting Started Remote control (OPTIONAL) 1 i DISP • Press it, you can check the clock time. • Press and hold it, you can turn on/off the display window. Getting Started j RPT Repeats playback k INT Intro scan l Numeric buttons (1 - 6) Selects a numbered preset station in TUNER. Battery Installation a SRC/ • OFF • When pressed, selects function sources. • When pressed and held, powers unit off. b FUNC When pressed, sets playback items in each mode.
Connecting About detachable control panel 7 Detaching the control panel 1. Press the 6 to open the control panel. Attaching the control panel 2. Push the control panel to right. Connecting 1. Align the left side of the panel with the stopper. 2. Push the right side of panel into the unit until it clicks. > Caution The control buttons may not work properly if the control panel is not attached properly. If this occurs, gently press the display. 3. Pull the control panel out of the unit. 4.
Connecting Installation ISO-DIN Installation Basic Installation Before installing, make sure that the ignition-switch is set to OFF and remove the terminal of the car battery to avoid short-circuiting. 2 Connecting Bend the claws according to the thickness of the dashboard. Control panel 1. Slide the unit into the ISO-DIN frame. 2. Fit screws removed from the old unit. 3. Slide the unit and frame into the dash opening. 4. Install the dash panel or adapter plate. Control panel 5.
Connecting 9 Connection Connecting to a car Before installing, make sure that the ignition-switch is set to OFF and remove the terminal of the car battery to avoid short-circuiting.
Operating Operation Using XDSS+ (Extreme Dynamic Sound System) It improves the treble and bass sound. Basic operations 1. Press and hold EQ/ • XDSS+ on the unit. 1. Turn the unit on by pressing any key on the unit. 2. To cancel it, press and hold it again. 2. Select a source by pressing SRC. Checking the clock 3. Rotate the volume knob to adjust the volume on the unit. Or press VOLUME W/S on the remote control. , Note If a source is not connected to the unit, the source is not recognized. 1.
Operating 11 Adjusting the general settings For [LIGHT] setting You can adjust [SOUND], [LIGHT] and [OTHER] settings. You can adjust the light effects by adjusting DIM, or DIM L. On the unit DIM (Dimmer) OFF/ ON/ AUTO: You can change the brightness of the display window during the power-on status. 1. Press `. 2. Rotate the volume knob to select [SOUND], [LIGHT], or [OTHER] and press it. Settings Description 3. Rotate the volume knob to select the item and press it.
Operating For [OTHER] setting AUX (Auxiliary) ON/ OFF It is possible to use auxiliary equipment with this unit. Activate the auxiliary setting when using auxiliary equipment connected to this unit. BEEP 2ND/ ALL BEEP 2ND: The beep is generated when a key is pressed for longer than 2 seconds. BEEP ALL: The beep is generated when any key is pressed. A-EQ (Auto EQ) ON/ OFF AUTO EQ operates only in the music file supported with genre in the device.
Operating Skipping to another track/ file on the unit. Press / Or press c/v on remote control. 1. Press the volume knob on the unit. Or press ENTER on the remote control. 1. Press INT/ RPT/ SHF. 2. Press it again to cancel. 2. Rotate the volume knob on the unit to select a desired ROOT or folder and press it. Or press w / s and press ENTER on the remote control. 3. Rotate the volume knob on the unit to select a desired track/ file and press it. Or press w / s and press ENTER on the remote control.
Operating , Note : The icon is displayed during MP3/WMA playback. MP3/WMA Disc compatibility with this unit is limited as follows: 1. Sampling Frequency / 8 kHz to 48 kHz (MP3) 22.05 kHz to 48 kHz (WMA). 2. Bit rate / within 8 kbps to 320 kbps (include VBR) (MP3) 32 kbps to 320 kbps (WMA). 3. CD-R/CD-RW file system should be "ISO 9660". 4. If you record MP3/WMA files using software which cannot create a FILE SYSTEM, for example "Direct-CD" etc., it will not be possible to playback MP3/WMA files.
Operating Listening to the radio Listening to a preset station 1. Press SRC repeatedly to select a source to TUNER. 2. Press the volume knob on the unit. Or press ENTER on the remote control. 2. Press BAND repeatedly to select a desired band. 3. Rotate the volume knob to select a preset station. Or press w / s on the remote control. 15 1. Press BAND repeatedly to select a desired band. on 3. For manual search, press and hold / the unit until “MANUAL“ is displayed.
Operating Adjusting TUNER settings On the unit 1. Press FUNC. 2. Rotate the volume knob to select an item and press it. 3. Rotate the volume knob to set the option and press it. 4. If you want to return to the previous step, press . On the Remote Control 1. Press FUNC/ • MENU. 2. Press w / s to select an item and press ENTER. 3. Press w / s to set the option and press ENTER. 4. If you want to return to the previous step, press .
Operating Using an USB device (OPTIONAL) 1. Open the USB cover. 2. Connect the USB device. 3. Press SRC repeatedly to select a source to USB. 4. Rotate the volume knob on the unit to adjust the volume. Or press VOLUME W/S on the remote control. Moving to another drive When connecting this unit to multi reader, press BAND on the unit (or DRV on remote control) to go the next drive. Each time you press the button, the driver modes change.
Troubleshooting Troubleshooting Symptoms Cause Solution Power doesn't turned on. Leads and connectors are not properly. Confirm once more that all connections are correct. The fuse is blown. Rectify the problem that caused the fuse to blow, and then replace it. Be very sure to install the correct fuse with the same rate. Noise and other factors are causing the built in microprocessor to operate incorrectly. Turn the unit off and then on again. No sound is heard.
Appendix Specifications 19 USB (OPTIONAL) Version: USB 1.1 or USB 2.0 Full Speed Bus Power Supply (USB): DC 5V 1A General Output Power: 53 W x 4 CH (Max.) Line OUT (OPTIONAL) Power Source: DC 12 V Frequency Response: 20 Hz to 20 kHz Speaker impedance: 4 Ω Output Voltage: 2 V (Max.) Ground System: Negative Dimensions (W x H x D): 178 x 50 x169 mm (without Control Panel) Subwoofer (OPTIONAL) Frequency Response: 20 Hz to 120 Hz Net Weight: 1.37 kg Output Voltage: 2 V (Max.
