SMART Hi-Fi AUDIO Wireless Multi-room Sound Bar Model : L AS650M (HS6) ENGLISH | OWNER’S MANUAL Please read this manual carefully before operating your speaker and retain it for future reference.
Getting Started Safety Information CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Getting Started This device is equipped with a portable battery or accumulator. 1 Getting Started Safety way to remove the battery from the equipment: Remove the old battery or battery pack, follow the steps in reverse order than the assembly. To prevent contamination of the environment and bring on possible threat to human and animal health, the old battery or the battery put it in the appropriate container at designated collection points.
Getting Started 5 For Wireless product European Union Notice Please contact to the following address for obtaining a copy of the DoC (Declaration of Conformity). Contact office for compliance of this product : LG Electronics Inc. EU Representative, Krijgsman 1, 1186 DM Amstelveen, The Netherlands yy Please note that this is NOT a Customer Service contact point. For Customer Service Information, see Warranty Card or contact the dealer that you purchased this product. Indoor use only.
Table of Contents Table of Contents 1 Getting Started 34 Network via the Wi-Fi Setup Method (iOS) Connecting the speakers to your Home Network (Additional) – Adding another speaker 3 8 8 9 10 10 11 12 12 Safety Information Main Features Introduction Accessories Front panel Rear panel Remote control Installing the sound bar Mounting the main unit on a wall 3 Operating 37 2 Connecting 14 14 16 16 16 17 18 Connecting the AC Adapter Wireless subwoofer connection Connecting to your TV – Using an
Table of Contents 55 56 57 57 57 57 57 – Music Flow PC Software for windows – Nero MediaHome 4 Essentials for Mac OS Standby mode – Standby mode – Network standby mode Reset the Speaker – Resetting the speaker 4 Troubleshooting 58 58 59 60 Troubleshooting – General – Network – Application and PC Software 5 Appendix 61 61 63 65 65 File requirement Trademarks and licenses Specifications Handling the Speaker Important Information Relating to Network Services TERMS OF USE 66 Some of the content in th
Getting Started Main Features 1 Getting Started Made for iPod/iPhone/iPad or Android device Enjoys music from iPod/iPhone/iPad or Android device with simple connection. LG Sound Sync Controls volume level of this unit by the remote control of your LG TV that is compatible with LG Sound Sync. Portable In Listens to music from your portable device. Music Flow Player application Listens to music stored on your smart device.
Getting Started Accessories LG Tag On sticker 1. Remove the battery cover on the rear of the remote control. Designs and specifications of the accessories are subject to change without prior notice. 2. Attach the supplied LG Tag On sticker on the remote control. See the image below. Remote control (1) Batteries (2) AC adapter (1) Power cord (1) Refer to the pages 45 and 51 for how to use.
Getting Started Front panel 1 Getting Started A Display window B Remote sensor LED indicator Shows connection status. C (Add) Adds the speaker to your network. (page 34) D (Wi-Fi) Connects your speaker to your network. (page 27) E F (Function) Selects the function and input source. F p/o (Volume) Adjusts volume level.
Getting Started Remote control 11 • • • • • • • • • • a • • • • • • • • • • 1 (Power) : Switches the unit ON or OFF. / Switches to the standby mode. FUNC : Selects the function and the input source. (Mute) : Mutes the sound. SOUND EFFECT : Selects a sound effect mode. WOOFER LEVEL : Sets the sound level of woofer. VOL o/p : Adjusts speaker volume. • • • • • • • • • • b • • • • • • • • • • REPEAT : Listen to your music repeatedly. C/V (Skip) : Skips Fast backward or Forward.
1 Getting Started Getting Started Installing the sound bar Mounting the main unit on a wall You can hear the sound by connecting the unit to the other device : TV, Blu-ray disc player, DVD player, etc. You can mount the main unit on a wall. Place the unit in front of the TV and connect it to the device you want. (Refer to pp. 16 - 21.) You can place the wireless subwoofer anywhere in your room. But it is better to place the subwoofer near the main unit.
Getting Started 1. Match the TV’s BOTTOM EDGE of Wall bracket install guide with the bottom of TV and attach to the position. 13 5. Put the unit on the brackets to match screw holes on the bottom of the unit. TV 1 2. When you mount it on a wall (concrete), use the wall plugs. You should drill some holes. A guide sheet (Wall bracket install guide) is supplied to drill. Use the sheet to check the point to drill. ,,Note To detach the unit, perform it in reverse order.
Connecting Connecting the AC Adapter Wireless subwoofer connection Connect the speaker to the power supply with the supplied AC adapter. LED indicator of wireless subwoofer 1. Connect the supplied AC power cord to the AC adapter. 2 Connecting 2. Connect the AC adapter cable to DC. IN adapter input. 3. Plug the AC power cord into an AC outlet. LED Color Status Green (Blink) The connection is trying. Green The connection is completed.
Connecting 15 3. If the LED of the wireless subwoofer already blinks in green continually, you can skip this step. Press and hold PAIRING on the back of the wireless subwoofer for more than 5 seconds. 2 4. Disconnect the power cord of the main unit and the wireless subwoofer. 5. Connect them again after the LED of the main unit and the wireless subwoofer is fully turned off. The main unit and the wireless subwoofer will be paired automatically when you turn on the main unit.
Connecting Connecting to your TV Please connect with this unit and TV using the optical digital cable or HDMI cable considering the state of the TV. Using an OPTICAL cable 2 Connecting 1. Connect the OPT. IN jack on the back of the unit to OPTICAL OUT jack on the TV using an OPTICAL cable. LG Sound Sync You can control some functions of this unit by your TV’s remote control with LG Sound Sync. It is compatible with the LG TV that is supported LG Sound Sync.
Connecting 17 With wired connection Using an HDMI cable 1. Connect your LG TV to the unit by using an optical cable. If you connect this unit to a TV that supports HDMI CEC and ARC (Audio Return Channel), you can enjoy the TV audio through the speakers of this unit without connecting the optical cable. Connect the HDMI OUT jack on the back of the unit to ARC jack on the TV using an HDMI cable. Optical cable 2 2.
Connecting What is SIMPLINK? HDMI cable Checklist Some HDMI cables do not support the ARC function, this can result in no sound output. When connecting this unit to the TV, if there is no sound, there might be a problem with the HDMI cable. Therefore connect this unit to the TV and check whether the Type A, High speed HDMI™ Cable with Ethernet.
Connecting 19 ARC (Audio Return Channel) function Additional information for HDMI The ARC function enables an HDMI capable TV to send the audio stream to HDMI OUT of the unit. yy When you connect an HDMI or DVI compatible device make sure of the following: To use this function : -- Your TV must support the HDMI-CEC and ARC function and the HDMI-CEC and ARC must be set to On. -- You must use the HDMI cable (Type A, High Speed HDMI™ cable with Ethernet).
Connecting Optional equipment connection For enjoying both sound and picture You can enjoy both sound and picture from the external device you connect. HDMI connection For enjoying sound only 2 Connecting You can enjoy the sound from the external device you connect. To the Blu-ray disc player, DVD player, etc. 1. Connect HDMI IN jack on the back of the unit to HDMI OUT jack on the audio device such as Bluray disc player, DVD player, etc. 2. Set the input source to HDMI IN.
Connecting PORT. (Portable) IN connection 21 OPTICAL IN connection Connect an optical output jack of external devices to the OPT. IN jack. Optical cable Listening to music from your portable player The unit can be used to play the music from many types of portable players or external devices. 1. Connect the portable player to the PORTABLE IN connector of the unit. 2. Turn the power on by pressing 1 (Power). 3.
Connecting Understanding Network Connection Basic Connection A Wired or Wi-Fi connection to router. B Wired and wireless connection. You can use multiple speakers in a multi-room configuration. Speaker 2 LAN Connecting A Router OR Speaker Router Speaker (Main) B LAN Router Speaker (Add) Group playback using Music Flow Player app You can use multiple speakers in a multi-room configuration.
Connecting 23 Installing “Music Flow Player” App Through QR code Install “Music Flow Player” app through QR code. Scan the QR code using the scanning application. Through “iTunes store” or “Google Play Store” 1. Tap the “iTunes store” icon or “Google Play Store” icon. 2 Connecting 2. Type in “Music Flow Player” in the search bar and tap “Search”. 3. Select “Music Flow Player” in the search result list to download.
Connecting Starting with Music Flow Player app 1. When you launch Music Flow Player app for the first time, the terms of use appears on the screen. Check the contents of terms of use and select [Accept]. 2 Connecting 2. Select [Start] to install the speaker you’ve purchased. Refer to “Connecting the speaker to your Home Network” on page 25. ,,Note If you want to return to the terms of use screen, initialize the Music Flow Player app on the smart device’s setting menu.
Connecting 25 Connecting the speaker to your Home Network Connecting the speaker to your network with a LAN cable Connection overview Broadband service Using a wired network provides the best performance, because the attached devices connect directly to the network without radio frequency interference. 2 Router Preparation yy Make sure that wireless network environment using a router is installed at your home. yy Make sure that the speaker and the smart device are connected to the same router.
Connecting 1. Turn on the unit by using 1 on the remote control or 1/! on the unit. The LED indicator starts to blink in white. 2. On your smart device, launch Music Flow Player app. Select [Start] to install the speaker. 5. Connect one end of the LAN cable to the speaker’s ETHERNET port and connect the other end to your wireless router. Wait a moment until the LED indicator stops blinking and stays white. 2 Connecting 6. Then select [Next] on the screen. 3.
Connecting 27 7. Select [Next] to complete the connection. Connecting the speaker to your Network via the Wi-Fi Setup Method (Android) Connection overview Broadband service After connecting the speaker, you can see the list of connected music storage device and music curation screen. Follow the instructions on the screen. ,,Note yy You cannot use the speaker without a router. When using the wired router, you can control the speaker with Music Flow PC Software.
Connecting 1. Turn on the unit by using 1 on the remote control or 1/! on the unit. The LED indicator starts to blink in white. 5. Press the button on the unit. Then the LED indicator blinks in white and red alternately. 2. On your smart device, launch Music Flow Player app. Select [Start] to install the speaker. 2 Connecting 6. Then select [Next] on the screen. 3. Check the LED indicator on the unit and select [Next] to go to the next step. 4. Select [Wireless connection] on the screen.
Connecting 29 7. If you have a password for your network, the security screen appears on your smart device. Enter your password. 9. Select [Next] to complete the connection. 2 ,,Note If the speaker fails to connect to your network or its network connection operates abnormally, place the speaker closer to your router and try again. Connecting 8. Then select [Next] on the screen. After connecting the speaker, you can see the list of connected music storage device and music curation screen.
Connecting Connecting the speaker to your Network via the Wi-Fi Setup Method (iOS) Connection overview 2 1. Turn on the unit by using 1 on the remote control or 1/! on the unit. The LED indicator starts to blink in white. 2. On your smart device, launch Music Flow Player app. Select [Start] to install the speaker. Broadband service Connecting Router 3. Check the LED indicator on the unit and select [Next] to go to the next step. 4. Select [Wireless connection] on the screen.
Connecting 5. Press the button on the unit. Then the LED indicator blinks in white and red alternately. 31 7. On your iOS device, go to iOS setting -> WiFi setting and select “MusicFlow_Setup” to connect. 2 Connecting 6. Then select [Next] on the screen. ,,Note yy If “MusicFlow_Setup” is not on the list, scan for available Wi-Fi networks again. yy When your smart device is connected to “MusicFlow_Setup”, you cannot use the internet. 8.
Connecting 9. If you have a password for your network, the security screen appears on your smart device. Enter your password. 11. Once the network connection is completed, return to the Music Flow Player app. 2 Connecting 12. Select [Next] to complete the connection. 10. On your iOS device, go to iOS setting -> Wi-Fi setting and select wireless router to connect. After connecting the speaker, you can see the list of connected music storage device and music curation screen.
Connecting 33 Notes on Network Connection yy Many network connection problems during set up can often be fixed by re-setting the router. After connecting the speaker to the home network, quickly power off and/or disconnect the power cable of the home network router or cable modem. Then power on and/or connect the power cable again. yy The wireless network operate at 2.
Connecting Connecting the speakers to your Home Network (Additional) Adding another speaker Connection overview Broadband service You can enjoy the music with multiple speakers and single smart device you have. 2 Requirements Connecting yy Wireless router yy Smart device (Android or iOS) yy Another speaker ,,Note Signal interference may lead to stop playback.
Connecting 35 1. Connect the speaker (Main) to your network. Refer to “Connecting the speaker to your home network” on page 25. 4. Press the ADD button on the rear of the speaker (Add). Then Network status LED blinks red. 2. On your smart device, select the Music Flow Player app. Tap the [Home] menu. 3. Select the [Add Speakers] on the side menu. ,,Note You can also add another speaker as below. 2 Connecting 5. Then select the [Next] on the screen.
Connecting 6. Select [Next] to complete the connection. 2 Connecting ,,Note Speakers may be not connected if the distance between the Sound Bar (Main) connected by LAN cable and the speaker (Add) to be connected is too far.
Operating 37 Enjoying the Music with Music Flow Player app Overview of Home menu Launch Music Flow Player app on your smart device. The [Home] appears. With Music Flow Player app, you can play music in your smart device. ,,Note yy For more detailed instruction about Music Flow Player app, switch on the [User Guide] in [Settings] > [General] on the side menu. yy Some of the content in this part may differ from Music Flow Player app depending on the application’s version. 3 1.
Operating Overview of the side menu Playing a song 1. Launch Music Flow Player app on your smart device. The [Home] appears. 1. Launch Music Flow Player app on your smart device. The [Home] appears. 2. Tap the [Home] menu. 2. Tap the [Home] menu. 3. Side menu appears. 3. Side menu appears. Select the [My Phone] on the side menu. 3 Operating a Home – Displays the Home menu. b My Phone – Displays the songs on this smart device.
Operating 39 5. Select the desired song. Then selected song is displayed and played. Managing a playlist On an album screen, tap the [ ] of the desired song. The pull down menu appears. ,,Note 3 Operating If the speaker is not selected, the selecting speaker pop-up appears. Select a desired speaker. a Play next – Selects music to play next. b Add to queue – Adds to queue list. c Add to playlist – Adds to a desired playlist.
Operating Overview of Playback Selecting Sound effect You can confirm and adjust various information on the playback screen. This speaker has a number of pre-set surround sound fields. You can select a desired sound mode by tapping [ ]. The displayed items for the equalizer may be different depending on sound sources and effects. 1. During playback, tap the [ ] as below. 3 Operating a Displays the speaker that music plays through. Displays current playing music. b - Repeats the desired contents.
Operating Sound Effect Description Standard You can enjoy optimized sound. Music You can enjoy comfortable and natural sound. Cinema You can enjoy more immersive and cinematic surround sound. Flat Provides balanced sound. Boost Boosts the mid-range for sound reinforcement. Treble / Bass Reinforces the treble and bass. ,,Note yy You can also select a desired sound mode by using SOUND EFFECT on the remote control. yy In some of surround modes, some speakers, there’s no sound or low sound.
Operating Group Playback You can group multiple speakers linked to the Music Flow Player app and play the same music through all the connected speakers in the same group. 3. Grouping option appears. Tap the checkbox to select the speaker you want to play with. Then select [OK]. 1. Select [Connected Speakers] on the side menu of Music Flow Player app. 3 Operating 4. The speakers is ready to group playback. 2. Connected speakers appear. Select the [ ] on the speaker desired song plays through.
Operating 43 Surround playback You can enjoy surround sound by adding another two speakers. 3. Surround environment option appears. Select the left and right speakers by tapping connected speakers. Then select [OK]. 1. Select [Connected Speakers] on the side menu of Music Flow Player app. 3 2. Connected speakers appear. Select the [ ] on the speaker. ,,Note yy It is recommended to set the surround speakers to same models.
Operating Seamless playback You can easily change the playing speaker from your smart device or the speaker to the another speaker without pause. Changing playing speaker from a smart device to a speaker ,,Note yy It is not supported when you go out of the house with your smart device. yy Wi-Fi function on smart device must be turned on. yy If the source is Portable In and Bluetooth, seamless play is not supported. (Media server and online streaming service are supported).
Operating 45 Changing the active speaker to a different speaker without a pause Setting the Speaker with Music Flow Player app With Music Flow Player app, you can set the connected speaker in your smart device. ,,Note yy For more detailed instruction about Music Flow Player app, switch on the [User Guide] in [Settings] > [General] on the side menu. yy Some of the content in this part may differ from Music Flow Player app depending on the application’s version.
Operating Overview of setting menu [General] Menu 1. Launch Music Flow Player app on your smart device. Sets for easier use of the speaker. 2. Select [Settings] on the side menu. Lock Screen Setting (Android only) This function allows you to display the Music Flow Player on the lock screen. (Lock screen setting is [ON] by default.) User Guide This function allows you to display or delete the guide on the menu. Music Curation Goes to the music curation.
Operating 47 a Rename – Renames the speaker. You can adjust speakers connected to your network. b Speaker LED – Turns on or off speaker’s LED indicator. (LED Indicator is [ON] by default.) c DRC – Turns on or off DRC function. (Page 52) d Auto Volume On/Off – Turns on or off Auto Volume function. (Page 54) e AV Sync – Adjust the audio and video Synchronization. (Page 52) f Woofer level – Adjust Woofer level. (Page 54) g Auto Display On/Off – Turns on or off Auto Display function.
Operating [Alarms/Sleep Timer] Menu [Music Library] Menu Turns on and off the speaker at a designated time. Manages the music library index. Alarms Sync Schedule Speaker will let you know when it is time. You can set the time to update the Music index automatically. Select the days and time to perform the update. (Sync Schedule is [OFF] by default.) Deletes selected alarm. Adds new alarm. 3 Sync Sleep Timer Manages the music library index. Sets a time to automatically turn off the speaker.
Operating 49 [Account management] Menu [Open source licenses] Menu Manages various social networking service and online streaming service. Shows LGE Open Source Software Notice. ,,Note In case of Music Flow Player app for iOS, social networking service is supported with iOS 6.0 or later. [Update] Menu Updates the speaker to the latest version. Displays the current application’s version. 3 Device version info. Operating App version info. Updates the latest speaker’s firmware version. 1.
Operating Using a Bluetooth Wireless Technology 1. Select the Bluetooth function by using FUNC on the remote control or F on the unit until the function is selected. Appears “BT” and then “BT READY” in display window. About Bluetooth 2. Operate the Bluetooth device and perform the pairing operation. When searching for this speaker on your Bluetooth device, a list of the devices found may appear in the Bluetooth device display depending on the type of Bluetooth device.
Operating ,,Note yy When using Bluetooth® technology, you have to make a connection between the unit and the bluetooth device as close as possible and keep the distance. However it may not work well in the case below : -- There is a obstacle between the unit and the bluetooth device. -- There is a device using same frequency with Bluetooth® technology such as a medical equipment, a microwave or a wireless LAN device.
Operating Other operations DRC (Dynamic Range Control) Make the sound clear when the volume is turned down (Dolby Digital only). Set to [DRC ON] by using DRC. AV Sync 3 Displaying input source information You can display various information of the input source by pressing INFO. OPTICAL/HDMI IN/PORTABLE : Audio format, Audio channel Sleep timer setting This unit will turn off by itself after the time set. Operating When receiving audio signals from TV, sound and images may not be matched.
Operating 53 Using your TV remote control AUTO POWER On/Off You can control some functions of this unit by your TV remote control even by other company’s product. Controllable functions are volume up/down and mute. This unit automatically turns on and off by an input source : Optical. Press and hold INFO on the remote control for about 3 seconds. “ON - TV REMOTE” appears and you can control this unit by your TV remote control. To check the status of this function, press and hold INFO.
Operating Sound adjustment Adjust volume level automatically This unit supports Auto volume function that automatically adjusts the volume level. When the output sound is too loud or too low, press AUTO VOL on the remote control. So you can enjoy the sound with appropriate levels. To cancel this function, press the button again while “ON” is displayed. 3 Operating Adjust the woofer level settings You can adjust the sound level of woofer from - 40 dB to 6 dB. 1. Press WOOFER LEVEL. 2.
Operating 55 Using Media Server for PC Media server Software allows users to access audio files stored in media server and enjoy them on this speaker via home networking. Before connecting to PC to play a file, Media server Software should be installed on your PC. ,,Note ,,Note yy Music Flow PC Software is not supported with Mac OS. In case of Mac OS, you can use the Nero MediaHome. yy The Music Flow PC Software is a customized software edition only for sharing files and folders to this speaker.
Operating Nero MediaHome 4 Essentials for Mac OS System requirements (Macintosh) About Nero MediaHome Essentials yy Hard drive space: 200 MB hard drive space for a typical installation of Nero MediaHome standalone Nero MediaHome 4 Essentials is a software for sharing video, audio and photo files stored on your computer to this speaker as a digital media server. Downloading Nero MediaHome Essentials 1. Start up your computer, visit http://www.lg.com. If necessary, select your region. 3 2.
Operating 57 Standby mode Reset the Speaker The speaker switches to the standby mode if there is no music playback or no button operation. If the speaker is not turned on or doesn’t respond, reset the speaker. Standby mode Resetting the speaker Option 1. button until you hear yy Press and hold the the beep sound once. You can see “DISABLE” on the display window. Then all wireless network ports are deactivated and the stored wireless network information is deleted.
Troubleshooting Troubleshooting General Symptoms Cause & Solution The unit does not work properly. yy Turn off the power of this unit and the connected external device (TV, Woofer, DVD-player, Amplifier, etc.) and turn it on again. yy Disconnect the power cord of this unit and the connected external device (TV, Woofer, DVD-player, Amplifier, etc.) and then try connecting again. The power does not turn on.
Troubleshooting 59 Symptoms Cause & Solution When you feel the output sound of the unit is low. Check the details below and adjust the unit according to them. yy Switch [ON] state of DRC function to [OFF] by using remote controller. yy With the sound bar connected with TV, change the AUDIO DIGITAL OUT setting on TV Setup Menu from [PCM] to [AUTO] or [BITSTREAM].
Troubleshooting Application and PC Software Symptoms Cause & Solution Music Flow Player app doesn’t work properly. Does an error occur when accessing the app? yy Make sure that your smart device is compatible with the app. yy Make sure that the Music Flow Player app is the latest version. yy Make sure that the speaker’s front LED turns from red to white. Music Flow PC Software doesn’t work properly.
Appendix File requirement Available File extensions : “.mp3”, “.wma”, “.flac”, “.m4a”, “.aac”, “.ogg”, “.wav” 61 Trademarks and licenses Sampling frequency: within 32 to 48 kHz (mp3, wma), up to 192 kHz/24 bit (flac) Bit rate: up to 320 kbps (mp3, wma) yy The file requirements are not always compatible. There may have some restrictions by file features and media server’s ability. yy Some wav files are not supported on this speaker.
Appendix Bluetooth® wireless technology is a system which allows radio contact between electronic. Connecting individual devices under Bluetooth® wireless technology does not incur any charges. A mobile phone with Bluetooth® wireless technology can be operated via the Cascade if the connection was made via Bluetooth® wireless technology. The Bluetooth® word mark and logos are owned by the Bluetooth® SIG, Inc. and any use of such marks by LG Electronics is under license.
Appendix 63 Specifications General (LAS650M (HS6)) AC adapter requirements Input 100 - 240 V ~ 50 / 60 Hz Output 25 V 0 2 A 30 W Power consumption Networked standby : 5.7 W (If all network ports are activated.) Dimensions (W x H x D) (1020 x 42 x 82) mm (with Foot) Net Weight (Approx.) 2.0 kg Operating temperature 5 °C to 35 °C Operating humidity 5 % to 90 % Input/Output OPT. IN 3 V (p-p), Optical jack x 1 PORTABLE IN 0.5 Vrms (3.
Appendix System ETHERNET (LAN) port Ethernet jack x 1, 10 BASE-T/100 BASE-TX Wireless LAN (Internal antenna) Integrated IEEE 802.11n (Draft 2.0) wireless networking access, compatible with 802.11a/b/g/n Wi-Fi networks. Bluetooth Version 4.0 Codec SBC yy Designs and specifications are subject to change without prior notice.
Appendix 65 Handling the Speaker When shipping the speaker Please save the original shipping carton and packing materials. If you need to ship the speaker, for maximum protection, re-pack the speaker as it was originally packed at the factory. Keeping the exterior surfaces clean yy Do not use volatile liquids such as insecticide spray near the speaker. yy Wiping with strong pressure may damage the surface. yy Do not leave rubber or plastic products in contact with the speaker for a long period of time.
Appendix TERMS OF USE or any part of the Services where we consider it reasonably necessary for technical, operational, security, legal or regulatory reasons. These Terms of Use apply to those individuals and groups who use LG’s Multiroom Speaker (LG Mutiroom Speaker), any software(s) associated with LG Multiroom Speaker, this application and any services associated this application (collectively “LG Software”).
Appendix 67 may be subject to the provider’s own terms and conditions and privacy policy. We encourage you to read these documents, although we are not responsible for their content. We do not accept any responsibility for apps, services or content provided by third party providers. We may impose limits on the use of or access to certain third party content, application or services, in any case without notice or liability.
Appendix If you have any questions or comments about these Terms of Use please contact www.lg.com. These Terms of Use may be updated by LGE from time to time. If we make a material change to our Terms of Use, we will update you via your LG Software or other means. Open source software notice To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit http://opensource.lge.com .
Appendix 69 Gracenote Servers are error-free or that functioning of Gracenote Software or Gracenote Servers will be uninterrupted. Gracenote is not obligated to provide you with new enhanced or additional data types or categories that Gracenote may provide in the future and is free to discontinue its services at any time. GRACENOTE DISCLAIMS ALL WARRANTIES EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND NON-INFRINGEMENT.
