LAD4700R_ENG LAD4700R/LAD4705R/LAD4710R ENGLISH CAR DVD Receiver Please read this instruction booklet carefully and completely before installing, operating or adjusting this product. GERMAN AUTO-DVD-Receiver Lesen Sie vor Anschluss, Bedienung und Einstellung dieses Gerätes die Anleitungen bitte sorgfältig und vollständig durch.
Safety note CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT SPLIT COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with the arrowhead symbol, within an equilateral triangle is intended to alert the user about the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
• A defective or soiled disc inserted into the unit can cause the sound to drop during playback. • Handle the disc by holding its inner and outer edges. • Do not touch the surface of the unlabeled side of the disc. Do not stick paper or tape, etc. on the surface. Do not expose the disc to direct sunlight or excessive heat. • Clean the disc before playback. Wipe the disc from the center outward with a cleaning cloth. • Never use solvents such as benzine or alcohol to clean the disc.
Notes on region code • Most DVD discs have a globe with one or more numbers on it clearly visible on the cover. This number must match your Car DVD Receiver’s region code or the disc cannot play. • If you try to play a DVD with a different region code from your player, the message “Check Region Code” appears on the screen.
Table of contents Safety note . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-4 Table of contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Before use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Before use Detaching the control panel You can detach the control panel when leaving the car. When detaching or attaching the control panel, be careful not to damage the connector on the back of the control panel and on the panel holder. 1 2 3 4 Press the “ ” button to unlock the control panel. Push the control panel to the right. Pull the control panel out of the unit. Put the detached control panel into the protective case.
Control Panel 1 2 4 3 6 5 7 8 INFO Control panel DISC MENU TA/PTY 21 1 2 19 20 18 MP3 WMA JPEG Movie 13 14 Disc Slot Display Window Release [ ] • [AUX IN] • [VIDEO OUT] 10 • Equalizer [EQ] • Extreme Dynamic Sound System [XDSS] Remote Sensor • Volume knob • [MUTE] • Power [PWR] Information [INFO] 5 15 6 7 8 9 [SOURCE] i] • Skip / Search [I/i i] • Seek/ Tune [I/i • Auto Store [AS] • Preset Scan [PS] u] • Folder Up/Down [U/u 3 4 17 16 11 [DISC MENU] 12 [DVD SETUP] 13 Shuffle [SHF]
PLAY (B) Starts playback. STOP (x) Stops playback. ANGLE DVD Selects a DVD camera angle if available. 3 SEARCH Selects a track or file. TITLE DVD Displays title menu, if available. 4 DISPLAY Accesses On-Screen display. 5 0-9 number buttons • Selects numbered items in the menu. • Selects a stored radio station frequency (1-6). ZOOM DVD VCD JPEG Enlarges video image. 6 BAND • Selects three FM and MW (AM) bands.
Installation Basic Installation Bend the claws according to the thickness of the dashboard Before installing, make sure that the ignition-switch is set to OFF and remove the terminal of the car battery to avoid short-circuiting. 1 2 3 4 Remove the existing receiver unit. Make the necessary connections. Install the installation sleeve. Install the unit into the installation sleeve.
Connecting to a car Before connecting, make sure that the ignition switch is set to OFF and remove the battery # terminal to avoid short circuits.
• YELLOW: This lead is for connection to the battery (back-up) terminal from which power is always supplied. • BLUE: This lead is for the power antenna connection. • BLUE/WHITE: This lead is for the remote amplifier connection.
Basic operation Turning the unit on Press MUTE/PWR (MUTE/PWR on the remote control) or any other buttons. Note : When you insert the CD in the CD slot, the unit turns on. Turning the unit off Press and hold MUTE/PWR (MUTE/PWR on the remote control). Inserting a disc Insert the disc, and starts playback automatically. Ejecting a disc Press EJECT. The disc automatically ejects from the loading slot.
Using the EQ (Equalizer) Press EQ/XDSS repeatedly. The indicator lights up in the following order. POP t CLASSIC t ROCK t JAZZ t VOCAL t SALSA t SAMBA t USER1 t USER2 t Off (No display) t POP... • POP : Optimized for R&B, Soul and Country music. • CLASSIC : Optimized for orchestral music. • ROCK : Optimized for Hard Rock and Heavy Metal music. • JAZZ : Sweet sound with soft feeling. • VOCAL : Powerful realism with strong sound quality. • SALSA : Reproduces salsa music acoustics.
AF(Alternative frequency) ON / OFF When the reception quality drops, the tuner automatically changes to another station in the network, broadcasting a better reception quality, using the PI and AF codes. AF ON : Wherever you drive, you can continue to listen to the same program without interruptions. AF OFF : Only station name will be displayed. In case of poor reception no alternative station can be used.
Radio operation Listening to radio stations 1 2 Press SOURCE (SRC on the remote control) to select the tuner. Press BAND repeatedly to select a band. The indicator lights up in the following order. FM1 t FM2 t FM3 t MW(AM) 3 Auto Search : Press I/i (b/B on the remote control). When a station is received, searching stops. Manual Search : Press and hold I/i (b/B on the remote control) until “MANUAL” appears, and then press it repeatedly. The frequencies move up or down step by step.
RDS operation RDS display options In normal RDS operation the display will indicate the station name. Pressing INFO enables you to cycle through the various data types in the following sequence: CT t FREQUENCY t PTY t RT t PS (When PS is receiving.) CT t • CT • RT • PI • AF • TP PTY t RT t FREQUENCY (When PS is not received.
CD/MP3/WMA operation Playing an Audio CD and MP3/WMA disc The unit can play MP3/WMA formatted recordings on CD-ROM, CD-R or CD-RW discs. Before playing MP3/WMA recordings, read the notes on MP3/WMA Recordings on page 35. If you change the source, CD play also stops (without ejecting the CD). Next time you select “CD” as the source, CD play starts from where playback has been stopped previously. Insert a disc in the unit and then “READING” appears in the display window, and playback starts automatically.
Search Press and hold I/i (m/M on the remote control) to select the required speed during playback and then release at the point you want. Backward search: mX4 t mX8 t B , Forward search: MX4 t MX8 t B Intro scan The first 10 seconds of each tracks/files (SCAN) or each files in the current selected folder ( SCAN) on the disc are played. 1 Press SCAN. – SCAN MP3 WMA (or SCAN ACD ) appears on the display window. Press and hold SCAN for about 2 seconds during playback. – SCAN appears on the display window.
To skip to the next or previous folder MP3 WMA (If there are more than two folders.) Press U (v on remote control) to skip to the next folder, and press u (V on remote control) to skip to the previous folder. Note Time display appearing on the display part when playing VBR file may vary and there may be some difference from actual time (both progress time and VBR are displayed at the same time when playing file).
SET UP menu Initial Settings By using the Setup menu, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup menu item, see the pages 20 to 24. 1 Press DVD SETUP or press and hold DISC MENU/SETUP on the remote control. The Setup menu appears. u (v/V on the remote control) to select the desired option then press i 2 Use U/u (B on the remote control) to move to the second level.
DISPLAY TV Aspect 16:9 : Select when a 16:9 wide TV is connected. 4:3 Letter Box : Select when a standard 4:3 TV is connected. Displays a wide picture with bands on the upper and lower portions of the screen. 4:3 Panscan : Select when a standard 4:3 TV is connected. Automatically displays the wide picture on the entire screen and cuts off the portions that do not fit. Note In case of DivX file, TV Aspect of “4:3 Panscan” and “4:3 Letter Box” is the same. B.L.E.
AUDIO Each DVD disc has a variety of audio output options. Set the player’s AUDIO options according to the type of audio system you use. Dolby Digital / DTS / MPEG Bitstream: Select “Bitstream” if you connect the Car DVD Receiver’s DIGITAL OUT jack to an amplifier or other equipment with a Dolby Digital, DTS or MPEG decoder. PCM (for Dolby Digital/ MPEG): Select when connected to a two-channel digital stereo amplifier.
1 Select “Rating” on the Lock menu then press i (B on the remote control). 2 To access the Rating, Password and Area Code features, you must input the 4-digit security code you created. If you have not yet entered a security code you are prompted to do so. Input a 4-digit code and press ENTER. Enter it again and press ENTER to verify. If you make a mistake before pressing ENTER, press I (b on the remote control). u (v/V on the remote control).
Others PBC Set Playback Control (PBC) to On or Off. On: Video CDs with PBC are played according to the PBC. Off: Video CDs with PBC are played in the same way as Audio CDs. DivX VOD We provide you the DivX® VOD (Video On Demand) registration code that allows you to rent and purchase videos based on the DivX® VOD service. For more information, visit www.divx.com/vod. 1 2 Select “DivX VOD” option and then press i (B on the remote control).
VCD Use the numeric buttons to select the track you want to view. Press DISC MENU/SET UP or RETURN on the remote control to return to the menu screen. Menu settings and operating procedures may differ. Follow the instructions on the each menu screen. You also may set PBC to On under setup. See the page 24. Notes • If parental control is set and the disc is not within the rating settings you must input the password. (See “Lock” menu on the page 22-23). • DVDs may have a region code.
Moving to another CHAPTER/TRACK When a title on a disc has more than one chapter or a disc has more than one track, you can move to another chapter/track as follows: i (?m/M? on the remote control) briefly during playback to select the next Press I/i chapter/track or to return to the beginning of the current chapter/track. Press I (?m on the remote control) twice briefly to step back to the previous chapter/track.
Time search The Time Search function allows you to start playing at any chosen time on the disc. 1. Press DISPLAY during playback. The on-screen display appears on the screen. The Time Search box shows the elapsed playing time of the current disc. u (v/V on the remote control) to select the Time Search icon in 2. Within 10 seconds, press U/u the on-screen display. The “-:--:--” appears in the Time Search box. 3. Within 10 seconds, use the number buttons to enter the required start time.
ZOOM The Zoom function allows you to enlarge the video image. Press ZOOM on the remote control repeatedly during playback or in the pause mode. - DVD : 100% → 400% → 1600% → 100%..., Video CD : 100% → 400% → 100%... You can move through the zoomed picture using b/B/v/V buttons. Note The zoom function may not work for some discs.
Moving to another folder u (v/V on the remote control) to select the previous or next folder in the disc. Press U/u Moving to another file Press I/i (b/B on the remote control) to select the previous or next file in the selected folder. Slide show interval time Press m/M on the remote control to select the option you want to use. It shows the slide show interval time: FAST t OFF t SLOWt NORMAL t FAST...
• Playable Subtitle format : SubRip(*.srt), SAMI(*.smi), SubStation Alpha(*.ssa), MicroDVD(*.sub), SubViewer, 2.0(*.sub), TMPlayer(*.txt), DVD Subtitle System(*.txt), Advanced Substation Alpah(*.ass) • Playable Codec format : DivX3.x, DivX4.x, DivX5.x (*.avi, *.divx, *.div), MP4S (*.asf), Xvid (*.avi, *.
Still picture and frame-by-frame playback 1. Press B X (X on the remote control) during playback. The unit will now go into the PAUSE mode. 2. You can advance the picture frame-by-frame by pressing X repeatedly on the remote control. 3. To return normal playback, press B X (PLAY(B) on the remote control). Slow motion 1. Press B X (X on the remote control) during playback. The unit will now go into the PAUSE mode. 2.
Time search The Time Search function allows you to start playing at any chosen time on the file. 1. Press DISPLAY during playback. The on-screen display appears on the screen. The Time Search box shows the elapsed playing time of the current disc. u (v/V on the remote control) to select the Time Search icon in 2. Within 10 seconds, press U/u the on-screen display. The “-:--:--” appears in the Time Search box. 3. Within 10 seconds, use the number buttons to enter the required start time.
Troubleshooting Sy : Symptom , Sy Power doesn’t turn on. / The unit doesn’t operate. Ca Leads and connector are not properly connected. Co Confirm once more that all connections are correct. Ca The fuse is blown. Co Rectify the problem that caused the fuse to blow, and then replace it. Be very sure to install the correct fuse with the same rate. Ca Noise and other factors are causing the built-in microprocessor to operate incorrectly. Co Turn the unit off and then on.
Language Code List Enter the appropriate code number for the initial settings “Disc Audio”, “Disc Subtitle” and/or “Disc Menu” (See page 20).
Reference Playing DivX® VOD content Some DivX® VOD (video on demand) content may only be playable a fixed number of times. When you load a disc containing this type of DivX® VOD content, the remaining number of plays is shown on-screen and you then have the option of playing the disc (thereby using up one of the remaining plays), or stooping. If you load a disc that contains expired DivX® VOD content (for example, content that has zero remaining plays), Rental expired is displayed.
Specifications GENERAL Output Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50W x 4CH (Max.) Power Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .DC 12V Speaker impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Ω Ground System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
