Owners manual

92
Auto key lock
Menu #.3
If you activate this function, the keypad
will be locked automatically after
predefined delay time when the slide is
closed.
Security
Menu #.4
PIN code request
(Menu #.4.1)
When this is set to On, you are requested
to enter your PIN each time you switch
the phone on.
NOTE!
• Press the right soft key in the PIN code
entry window to return to the previous
step.
• 3 incorrect PIN code entries would
invalidate the PIN code. And you have
to enter the PUK (PIN Unblock Key)
code to configure the PIN code again.
• The maximum number of times you
may enter the PUK code is 10. (Note:
If you enter an incorrect PUK code 10
times, the USIM card will be blocked
and must be replaced.)
• If the PIN code request cannot be
disabled by operator settings, you will
not be able to choose this menu item.
Handset lock
(Menu #.4.2)
You can lock your phone. The following
4 lock functions are available.
When switched on:
Locks the handset
whenever the handset is switched on.
When USIM changed:
Locks the
handset when the phone's USIM card
has been changed.
Immediately:
Locks the handset
immediately.
None:
Deactivates the lock function.
You are requested to enter the security
code to confirm the selection.
- To unlock the handset, you need to
enter the security code.
Change codes
(Menu #.4.3)
You can change the PIN, PIN2, and the
mobile phone password.
PIN code
PIN is the abbreviation for Personal
Identification Number, and is used to
restrict use by an unauthorised user.
ß
ß
ß
ß
ß
Settings