User guide

7
ENG
ENGLISH
ASSEMBLING AND PREPARING
Setting up the Monitor set
Attaching the Stand Base
1
Place the Monitor set with the screen side
down on a flat and cushioned surface.
Lay a foam mat or soft protective cloth
on the surface to protect the screen from
damage.
CAUTION
2
Attach the
Stand Body
to the monitor.
Insert the two Lockers of the Stand Body right
into the groove of the monitor head and secure
them by pressing the left and right bottom
sides.
Locker
3
Secure the monitor and the
Stand Body
with
the 2 screws.
4
Attach the
Stand Base
from the
Stand Body
by
turning the screw to the right with a
Coin
.
Tighten the screws firmly to prevent the monitor
from tilting forward. Do not over tighten.
CAUTION
If you don`t fasten the screw tightly, monitor
will fall down and get damaged.
WARNING