OWNER’S MANUAL DVD Receiver System Please read this manual carefully before operating your set and retain it for future reference. MODEL HT935TAW (HT935TAW, SH95TA-F/ S/ C/ W, W95) P/NO : MFL65899703 HT905TAW-A0_DSAUNLK_ENG_9703.
1 Safety Information Safety Information 1 Safety Information CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USERSERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Safety Information IMPORTANT SAFETY NOTICE Safe way to remove the battery or the battery from the equipment: The cord grip for the plug fitted to this product is built into the existing power cord as supplied. If, for any reason you need to shorten the cord, Remove the old battery pack, follow the steps in reverse order than the assembly.
Contents Contents 1 2 21 Resolution Setting 21 Video Output Resolution 22 Optional Equipment Connection 22 AUX In Connection Safety Information 22 AUDIO (PORT.
Contents 32 Starting play from selected Appendix time 32 Resume playback 41 Language Codes 33 Marked Playback 42 Area Codes 43 Trademarks and Licenses 44 Specifications 33 Changing subtitle code page 34 Viewing a PHOTO file 34 Options while viewing a photo 35 Sleep Timer Setting 35 Dimmer 35 Turn off the sound temporarily 35 Last Scene Memory 35 System Select - Optional 35 Adjust the speaker level 1 2 3 settings 36 Radio Operations 36 Presetting the Radio Stations
Preparation 2 Preparation 2 Preparation Unique Features Accessories Portable In Please check and identify the supplied accessories. Listens to music from your portable device. (MP3, Notebook, etc) USB Direct Recording Records music from CD to your USB device. Video cable (1) HDMI cable (1) Remote control (1) Batteries (2) FM antenna (1) AM antenna (1) Full HD up-scaling Views Full HD picture quality with simple setup.
Preparation Playable Discs This unit plays DVD±R/RW and CD-R/RW that contains audio titles, DivX, MP3, WMA and/or JPEG files. Some DVD±RW/DVD±R or CDRW/CD-R cannot be played on this unit due to the recording quality or physical condition of the disc, or the characteristics of the recording device and authoring software. DVD-VIDEO (8 cm / 12 cm disc) Discs such as movies that can be purchased or rented.
Preparation Playable file Requirement DivX file compatibility with this unit is limited as follows : • Available resolution: within 720 x 576 (W x H) pixels. • The file name of the DivX subtitle should be entered within 45 characters. • If there is impossible code to express in the DivX file, it may be displayed as " _ " mark on the display. • Frame rate : less than 30 fps. • If the video and audio structure of recorded files is not interleaved, either video or audio is outputted.
Preparation Remote control t RADIO&INPUT: Changes input sources. • • • • • • • • • • b • • • • • • • • • 0 to 9 numerical buttons : Selects numbered options in a menu. OPEN / CLOSE a RADIO & INPUT s REPEAT : Selects a play mode. (Repeat/ Random) • • • • • • • • • • c • • • • • • • • • b CLEAR SKIP c ./> SKIP : Goes to next or previous chapter/ track/ file. REPEAT SCAN m/M SCAN : Searchs backward or forward.
Preparation TUNING -/+ : Tunes in the desired radio station. Remote control OPEN / CLOSE a RADIO & INPUT O RETURN : Moves backwards in the menu or exits the setup menu. TITLE : If the current DVD title has a menu, the title menu appears on the screen. Otherwise, the disc menu may not appear. b 2 CLEAR Preparation SKIP c REPEAT SCAN DISC MENU : Accesses the menu on a DVD disc. • • • • • • • • • • f • • • • • • • • • SKIP MONO/STEREO MARKER : Marks play list.
Preparation 11 Front panel b c 2 Preparation a k j ihg f e d a 1/\ (POWER) Switches the unit ON or OFF. g x STOP Stops playback. b Disc Tray h N/X (PLAY / PAUSE) Starts playback. Pause playback temporarily, press again to exit pause mode. c Display window Shows the current status of the unit. d VOLUME Adjusts speaker volume. e F (FUNCTION) Changes the input source or function. f ./> (SKIP) Go to next or previous file/track/chapter.
Preparation Rear panel a b c de 2 Preparation ih a Power cord b Speakers connectors Connect the speaker cables. c Cooling Fan d Antenna Connector FM- Connect the FM wired antenna AM- Connect the AM loop antenna e VIDEO OUT Connect to a TV with video inputs. HT905TAW-A0_DSAUNLK_ENG_9703.ind12 12 g f f HDMI OUT (Version 1.2A) Connect to TV with HDMI inputs. (Interface for digital audio and video) g OPTICAL IN Connect to optical audio equipment.
Installation 13 3 Installation Assembling the speaker stand to the speaker Attach the speakers to the speaker stands by rotating the screws. Before connecting the speakers, assemble the speakers. Please check the items for assembling the speakers. Installation 3 Pakage contents Speaker Stand HT905TAW-A0_DSAUNLK_ENG_9703.
Installation Attaching the speakers to the unit 1. Connect the wires to the unit. Match each wire’s colored band to the same colored connection terminal on the rear of the unit. To connect the cable to the unit, press each plastic finger pad to open the connection terminal. Insert the wire and release the finger pad.
Installation 15 Wireless speakers connection LED indicator of wireless receiver Operation Blue The wireless receiver is receiving the signal of the wireless transmitter. Red The Wireless Receiver is in standby mode. Off (No display) The Wireless Receiver is turned off. Initial setting an ID of wireless receiver 1. Connect the Wireless Receiver and the rear speaker (right, left) with the speaker cables. 3 Installation LED Color 2. Connect the power cord of the Wireless Receiver to the outlet. 3.
Installation About Ferrite Core (for EMI only) Be sure to attach the ferrite core to the speaker cable (for connecting to this unit and wireless receiver). This ferrite core can reduce noises. How to attach the ferrite core 1. Press the stopper [a] of the ferrite core to open. 2. Wind the speaker cables once on the ferrite core. 3. Close the ferrite core until it clicks. Refer to the fig.3 and comment. NOTE • If there is a strong electromagnetic wave product nearby, interference may occur.
Installation Positioning the system A Front left speaker (L)/ B Front right speaker (R): Place the front speakers to the sides of the monitor or screen and as flush with the screen surface as possible. B C G A A A D D Surround left speaker (L)/ E Surround right speaker (R): Place these speakers behind your listening position, facing slightly inwards. F Subwoofer: The position of the subwoofer is not so critical, because low bass sounds are not highly directional.
Installation Connections to Your TV Component Video Connection Make one of the following connections, depending on the capabilities of your existing equipment. You can hear the sound through the system’s speakers. Connect the COMPONENT VIDEO OUTPUT (PROGRESSIVE SCAN) jacks on the unit to the corresponding input jacks on the TV using component cables.
Installation HDMI Out Connection If you have a HDMI TV or monitor, you can connect it to this unit using a HDMI cable. Connect the HDMI OUT jack on the unit to the HDMI IN jack on a HDMI compatible TV or monitor. Set the TV’s source to HDMI (refer to TV’s Owner’s manual). HDMI Connection 19 NOTE • If a connected HDMI device does not accept the audio output of the unit, the HDMI device ’s audio sound may be distorted or may not output.
Installation Video Connection Connect the VIDEO OUT jack on the unit to the video in jack on the TV using a video cable. You can hear the sound through the system’s speakers. Video Connection Unit 3 Installation TV Yellow HT905TAW-A0_DSAUNLK_ENG_9703.
Installation Resolution Setting The unit provides several output resolutions for HDMI OUT and COMPONENT VIDEO OUT jacks. You can change the resolution using [Setup] menu. 1. Press HOME. 2. Use I/i to select the [Setup] and press ENTER. The [Setup] menu appears. 21 Video Output Resolution Displayed resolution in display window and outputted resolution may different according to connection type. [HDMI OUT]: 1 080p, 1 080i, 720p and 480p (or 576p) and 480i (or 576i) [VIDEO OUT]: 480i (or 576i) 3.
Installation Optional Equipment Connection AUDIO (PORT. IN) In Connection Connect an output of portable device (MP3 or PMP etc) to the AUDIO (PORT. IN) input connector. PORT.IN Connection AUX In Connection Connect an Output of auxiliary device to the AUX (L/R) INPUT Connector. AUX In Connection 3 MP3 player, etc... Installation Unit Listening to music from your portable player or external device The unit can be used to play the music from many types of portable player or external devices.
Installation USB Connection Connect the USB port of USB Memory (or MP3 player, etc.) to the USB port on the front of the unit. 23 Compatible USB Devices • MP3 Player : Flash type MP3 player. • USB Flash Drive : Devices that support USB2.0 or USB1.1. • The USB function of this unit does not support some USB devices. USB Connection USB device requirement Devices which require additional program installation connected to a computer, are not supported.
Installation OPTICAL In connection Antenna Connection Connect an optical output of Unit (or Digital Device etc) to the OPTICAL IN connector. OPTICAL IN Connection Connect the supplied FM/AM antenna for listening to the radio. Connect the AM Loop antenna to the AM antenna connector. Connect the FM Wire antenna to the FM antenna connector.
Installation By using the Setup menu, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup menu item, see pages 25 to 29. OSD Initial language settings During the first use of this unit, the initial language setup menu appears on your TV screen. You must complete initial language selection before using the unit. English will be selected as the initial language. 1.
Installation Language Menu Language Select a language for the Setup menu and then on screen display. Disc Audio / Disc Subtitle / Disc Menu Select the language you prefer for the audio track (disc audio), subtitles, and the disc menu. 3 [Original] Refers to the original language in which the disc was recorded. Installation [Other] To select another language, press numeric buttons and then ENTER to enter the corresponding 4-digit number according to the language code list on the page 41.
Installation 5.1 Speaker Setup Make the following settings for the built-in 5.1 channel surround decoder. 1. Select [5.1 Speaker Setup] on the [Audio] menu. 2. Press ENTER. The [5.1 SPEAKER] appears. [Speaker selection] Select a speaker that you want to adjust. NOTE Certain speaker settings are prohibited by the Dolby Digital licensing agreement. [Size] Since the speaker settings are fixed, you cannot change the settings. [Volume] Press I i to adjust the output level of the selected speaker.
Installation Vocal Select [On] to mix karaoke channels into normal stereo. This function is effective for multi-channel karaoke DVDs only. HD AV Sync 3 Installation Sometimes Digital TV encounters a delay between picture and sound. If this happens you can compensate by setting a delay on the sound so that it effectively ‘waits’ for the picture to arrive: this is called HD AV Sync.
Installation You can enter or change password. 1. Select [Password] on the [Lock] menu and then press i. 2. Press ENTER. 3. Input a password and press ENTER. To change the password, press ENTER when the [Change] option is highlighted. Input a password and press ENTER. Enter it again and press ENTER to verify. 4. Press HOME to exit the menu. NOTE If you forget your password, you can clear it using the following steps: 1. Select the [Setup] menu on the [Home] menu.
Operation 4 Operation Using the Home Menu Basic Operations 1. Press HOME. Displays the [Home] menu. 1. Insert the disc by using the Z OPEN/ CLOSE or Connect the USB device to the USB port. 2. Press HOME. Displays the [Home] Menu. 4 Operation 2. Select an option by using I i. 3. Press ENTER then selected option menu. [Music] – Displays [MUSIC] menu. 3. Select an option by using I i. If you select the [Movie], [Photo] or [Music] option when you connect up to two devices, it appears as belows.
Operation Stop Do this Press x (STOP). Playback Press B (PLAY), MONO/ STEREO. Pause Press X (PAUSE/STEP). Frameby-Frame playback Press X (PAUSE/STEP) repeatedly to play title Frame-by-Frame. (DVD, DivX only) During playback, press ./> SKIP to go to Skipping to the next chapter/ track/ the next/ file or to return to the previous beginning of the current chapter/ track/ chapter/ track/ file. file Press . SKIP twice briefly to step back to the previous chapter/ track/ file.
Operation To display the DVD Menu DVD When you play a DVD which contains several menu, you can select the menu you want using the Menu. 1. Press DISC MENU. The disc’s menu appears. DVD When you play a DVD which contains several title, you can select the title you want using the Menu. 1. Press TITLE. The disc’s title appears. Operation 2. Select the menu by pressing U u I i. 3. Press B (PLAY), MONO/STEREO to confirm. 1.5 times speed playback 3.
Operation ACD MP3 NOTE WMA The mark function enables you to store your favourite files from any disc or USB device in the unit memory. 1. Select [Music] on the [Home] menu. Music menu Returning to the upper folder. (MP3/ WMA only) File information will be displayed according to the ID3TAG information on the appropriate music file. (MP3 only) If you want to select all files on the list, select [Select All] and press ENTER. To delete a Marker 1.
Operation Viewing a PHOTO file JPG About help menu in the full screen. This unit can play discs with photo files. Menu 1. Select [Photo] on the [Home] menu and press ENTER. Menu Photo menu Moving to the previous or next file list. Buttons INFO/ DISPLAY Operation Displaying the Option menu. b/B Prev./ Next I/i Moving to another file O Close O RETURN Returning to the [Photo] menu. Options while viewing a photo You can use various options during viewing a photo in full screen. 4 1.
Operation Sleep Timer Setting System Select - Optional Press SLEEP one or more times to select delay time between 10 and 180 minutes, after the unit will turn off. You must select the appropriate system mode for your TV system. Press and hold X (PAUSE/ STEP) for more than five seconds to be able to select a system in the [Home] menu. (PAL/ NTSC) To check the remaining time, press SLEEP.
Operation Radio Operations Presetting the Radio Stations You can preset 50 stations for FM and AM (MW). Be sure that both FM and AM aerials are connected. (Refer to the page 24) Listening to the radio 1. Press t RADIO&INPUT until FM or AM (MW) appears in the display window. The last received station is tuned in. 2. Press and hold TUNING (-/+) for about two seconds until the frequency indication starts to change, then release. Scanning stops when the unit tunes in a station.
Sound adjustment Setting the surround mode On Display Description CLRVOICE This program make voice sound clear, improving the quality of voice sound. (We encourage to use this EQ when you watch the movie of 5.1 channel.) GAME You can enjoy more virtual sound while playing video games. NIGHT This may be useful when you want to watch movies at low volume late at night. RETOUCH When listening to MP3 files or other compressed music, you can enhance the sound.
Operation Advanced Operations Recording to USB You can record music or sound souce to USB device by connecting in to the port on the unit. 1. Connect the USB device to the unit. 2. Select a mode in which you want to record. Play back a sound source first. 3. Start the recording by pressing z REC. 4. To stop recording, press x STOP. [All tracks/ files recording] Record to USB in stop or play mode.
Maintenance 39 5 Maintenance Notes on Discs Handling the Unit Handling Discs When shipping the unit Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory. Keeping the exterior surfaces clean • Do not use volatile liquids such as insecticide spray near the unit. • Wiping with strong pressure may damage the surface.
Troubleshooting 6 Troubleshooting PROBLEM CAUSE CORRECTION Plug the power cord into the wall outlet No power The power cord is disconnected. securely. Select the appropriate video input mode The TV is not set to receive the DVD signal. on the TV so the picture from the unit appears on the TV screen. No picture The video cables are not connected Connect the video cables securely to both securely. the TV and unit.
Appendix 41 7 Appendix Language Codes Language Code Language Code Language Code Language Code Afar Afrikaans Albanian Ameharic Arabic Armenian Assamese Aymara Azerbaijani Bashkir Basque Bengali; Bangla Bhutani Bihari Breton Bulgarian Burmese Byelorussian Chinese Croatian Czech Danish Dutch English Esperanto Estonian Faroese Fiji Finnish 6565 6570 8381 6577 6582 7289 6583 6588 6590 6665 6985 6678 6890 6672 6682 6671 7789 6669 9072 7282 6783 6865 7876 6978 6979 6984 7079 7074 7073 French Frisian
Appendix Area Codes Choose a area code from this list.
Appendix Trademarks and Licenses 43 Energy Saving ( Extremely Low Power Consumption) On the LG products, an innovative power consumption system in stand-by mode is built. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. It consumes less than 0.09 watts in that mode. Therefore, the small amounts of electricity are consumed even though the power plug is inserted.
Appendix Specifications What is SIMPLINK? Some functions of this unit are controlled by TV’s remote control when this unit and LG TV with SIMPLINK are connected through HDMI connection. Controllable functions by LG TV’s remote control; Play, Pause, Scan, Skip, Stop, Power Off, etc. • Refer to the TV owner’s manual for the details of SIMPLINK function. • LG TV with SIMPLINK function has the logo as shown above. • Use a higher version cable than 1.2 A HDMI cable.
Appendix Speakers • Stereo mode: 180 W + 180 W (4 Ω at 1 kHz) • Front speaker Type: Impedance : Rated Input Power: Max. Input power: Net Dimensions (W x H x D): Net Weight: • Surround mode: Front 180 W + 180 W (4 Ω at 1 kHz) Center 180 W (4 Ω at 1 kHz) Surround 180 W + 180 W (4 Ω at 1 kHz) Subwoofer 200 W (3 Ω at 60 Hz) Wireless receiver • Power requirements: Refer to main label. • Power consumption: Refer to main label. • External dimensions (WxHxD): 64 x 213.6 x 252.3 mm (2.5 x 8.6 x 9.
• HT905TAW-A0_DSAUNLK_ENG_9703.
HT905TAW-A0_DSAUNLK_ENG_9703.
