HT353SD-D0_ENG_UK_MFL56762613 HT353SD (HT353SD-D0, SH33SD-S/W) ENGLISH DVD/CD RECEIVER Read the manual carefully before using the unit R P/N: MFL56762613
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
QUICK SETUP GUIDE Speaker System Connection ENGLISH Connect the speaker wires the speaker terminals. To obtain the best possible surround sound, adjust the speaker parameters (volume, distance, etc.). Notes: Be sure to match the speaker wires to the appropriate terminal on the components, + to + and – to –. If the cables are reversed, the sound will be distorted and will lack bass.
Introduction Types of Playable Discs Installation Before Use . . . . . . . . . . . . . . . . . . TV Connection . . . . . . . . . . . . . . . Antenna Connection . . . . . . . . . . Speaker System Connection . . . Optional Equipment Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 .5 .5 .5 .5 Operation Operate using the Front Panel . . . . . . . . . . . . . . . .6 Operate using the Remote Control . .
Installation ENGLISH Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit. Be careful of the following Be careful to make sure children not to put their hands or any objects into the *speaker duct. *Speaker duct: A hall for plentiful bass sound on speaker cabinet(enclosure). TV Connection Make one of the following connections, depending on the capabilities of your existing equipment.
Operation 1 2 3 4 12 5 6 7 11 10 8 9 Operate using the Front Panel 1. ( /[)POWER button Lights red when the receiver is in Standby mode (off) 2. DISC Tray 3. DISPLAY Window 4. Remote Sensor:RemoteControl Operation Range Distance: About 23 ft (7 m) from the front of the Remote Sensor Angle: About 30° in each direction in front of the Remote Sensor 5. OPEN/CLOSE Opens and closes the disc tray. 6. • (B/X)PLAY/PAUSE • FUNC.
FUNCTION INPUT SLEEP RETURN EQ VSM 13. b/B/v/V (left/right/up/down)Selects an option in the menu. 11 9 13 10 12 14 15 16 18 17 19 20 REPEAT REPEA S-TITLE RDS preset station you want. Each time you press the button, the DVD/CD Receiver tunes in one preset station at a time. Preset radio stations in the DVD/CD Receiver’s memory first (see “Presetting radio stations”) TUN.(-/+) (b/B) For manual tuning, press TUN (-/+) repeatedly. For automatic tuning, press and hold TUN.
Record AUDIO CD source to USB One track recording : If the usb recording is played during playback of the cd, the only track would be recording into the USB. All track recording: If the USB Rec. button is pressed at the CD stop, all track would be recording. Program list recording: USB Records after selectig the tracks pressing the PROG./MEMO. button if you want to record the tracks you want. 20. SUBTITLE DVD DivX During playback ,S-TITLE repeatedly to select a desired subtitle language. 21.
Speaker selection Select a speaker that you want to adjust. [Front speaker (Front L), Front speaker (Front R), Center Speaker (Center), Subwoofer (SubWoofer), Rear speaker (Rear L), Rear speaker (Rear R)] Note: Certain speaker settings are prohibited by the Dolby Digital licensing agreement. Size: Since the speaker settings are fixed, you cannot change the settings. Volume: Press b / B to adjust the output level of the selected speaker.
Presetting the Radio Stations You can preset 50 stations for FM Before tuning, make sure that you have turned down the volume. 1. Press FUNCTION on the Remote Control until FM appears in the display window. 2. Press and hold TUN.(-/+) for about two seconds until the frequency indication starts to change, then release. Scanning stops when the DVD/CD Receiver tunes in a station. 3. Press PROG./MEMO. on the Remote Control. A preset number will flash in the display window. 4.
Moving to another File Press SKIP (. or >) once during viewing a picture to advance to the next or previous file. Rotating the picture Press v /V during showing a picture to rotate the picture clockwise or counter-clockwise. Playing a DivX Movie file You can play DivX file in USB device and DivX disc. in the DVD/CD Receiver 1. Insert a disc and close the tray. The MOVIE menu appears on the TV screen. 2. Press v / V to select a folder and then press ENTER. A list of files in the folder appears.
Reference Language Codes Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.
Troubleshooting Symptom No power. Cause • The power cord is disconnected. • The video cable is not connected securely. • The connected TV power is turned off. • The equipment connected with the audio cable is not set to receive DVD signal output. • The audio cables are not connected securely. • The power of the equipment connected with the audio cable is turned off. • The audio connecting cable is damaged. Correction • Plug the power cord securely into the wall outlet. • Insert a disc.
MP3 / WMA disc compatibility with this player is limited as follows: • Sampling frequency: within 8 - 48 kHz (MP3), within 22.05 - 48kHz (WMA) • Bit rate: within 8 - 320kbps (MP3), 32 - 256kbps (WMA) Support Ver : v2 , v7, v8, v9 • File extensions: “.mp3” / “.wma” • CD-ROM file format: ISO9660 • We recommend that you use Easy-CD Creator, which creates an ISO 9660 file system.
Technology with the human touch GUARANTEE ● LG Electronics U.K. Ltd. will provide the following services in order to expedite this Guarantee. 1. All faulty components which fail due to defective manufacture will be replaced free of charge for a period of 12 months from the original date of purchase. 2. The dealer (or his service agent) who sold the product will be reimbursed for any labour provided in the repair of this LG equipment, for a period of 12 months from the original date of purchase.
