User guide

Function
20
SCREEN Menu Options
1. Press the MENU button. Then, move to SCREEN with the
∧, ∨, ＜, ＞ buttons and press the ◉OK button.
2. Press the ∧, ∨ buttons to move to PJT Mode and press
the ◉OK button.
3. Move to a desired item with the ∧, ∨ buttons and then
press the ◉OK button.
• Select Rear when projecting from the back of the transparent screen purchased separately.
• Select Ceiling when installing the product on the ceiling.
• When PJT Mode is Rear/Ceiling, the left/right of the speaker changes automatically.
• Press the MENU or RETURN button to exit the menu screen.
To Change PJT Mode
* This function turns the projected image upside down or flips horizontal.
1. Press the Q.MENU button on the remote control.
2. Press the ∧, ∨ buttons to move to Aspect Ratio.
3. Press the ＜, ＞ buttons to select a desired screen size.
Using Aspect Ratio Function
* Use Picture mode function to set the projector for the best picture appearance.
• Some options may not be available depending on input signals.
• You can use this function through the MENU button.
• To exit the menu display, press the RETURN button.
SCREEN
PJT Mode : Front
Aspect Ratio : 16 : 9
Keystone
RGB Config.
Q-Menu
Close
ꔗ 16:9 ꔃ
Vivid
Off
Eject
Aspect Ratio
Picture Mode
Sleep Timer
Eject USB
ꔗ 4:3 ꔃ ꔗ Just Scan ꔃ ꔗ Set By Program ꔃ
ꔗ Cinema Zoom1 ꔃ ꔗ Zoom ꔃ ꔗ 16:9 ꔃ
1. Press the KEYSTONE +, - button of remote control.
2. Press the KEYSTONE +, - button to adjust the screen condition
as you want.
• Keystone can be adjusted from -40 to 40.
• You can use this function through the MENU button.
• To exit the menu display, press the RETURN button.
Using Keystone Function
* Use this function when the screen is not at a right angle to the projector and the image is a trapezoid shape.
* Only use the Keystone function when you can’t get the best angle of projection.
•Keystone 0
ꔗ ꔃ
- +
- +
ꔂMove ꔉOK
ꔉOK