OWNER’S MANUAL DLP PROJECTOR Please read this manual carefully before operating your set and retain it for future reference. HS200 HS200G HS201 HS201G www.lg.
DLP PROJECTOR Warning This is a class B product. In a domestic environment this product may cause radio interference, in which case the user may be required to take adequate measures. AT DE DK ES FI This projector complies with EMC Directive and R&TTE Directive.
Contents Contents Safety Instructions........................................................ 4 Names of parts Main Body...........................................................................................7 Control Panel......................................................................................7 Connecting Part............................................................................... 8 Remote Control . .............................................................................
Safety Instructions Safety Instructions Please take note of the safety instructions to prevent any potential accident or misuse of the projector. ꔈ Safety Instructions are given in two forms as detailed below. WARNING : The violation of this instruction may cause serious injuries and even death. NOTES : The violation of this instruction may cause injuries or damage to the projector. ꔈ After reading this manual, keep it in the place that you can access easily.
Safety Instructions Power WARNING Never touch the power plug with a wet hand. Do not plug-in too many items into one power outlet. Prevent dust from collecting on the power plug pins or outlet. This may cause an electric shock hazard! It may result in overheating of the outlet and create a fire hazard! This may cause a fire hazard! Power NOTES Hold the plug firmly when unplugging. If you pull the cord, it may be damaged.
Safety Instructions Using WARNING If the projector is in a room that experiences a gas leak, do not touch the projector. Don’t look at the laser beam directly as it can cause eye damage! Always open the lens door or remove the lens cap when the projector lamp is on. It can cause a fire or a burn by a spark. Using NOTES Do not place heavy objects on top of projector. Take care not to impact the lens particularly when moving the projector. Do not touch the lens of the projector.
Names of parts Names of parts Main Body *T he projector is manufactured using high-precision technology. You may, however, see on the Projector screen tiny black points and/or bright points (red, blue, or green). This can be a normal result of the manufacturing process and does not always indicate a malfunction. Control panel Speaker Speaker Air Outlet Focus ring Control Panel INPUT Button Switches to Component, Video, RGB or HDMI mode. ∧/∨/＜/＞Button Adjusts functions of menus.
Names of parts Connecting Part IR (Remote control sensor) * Do not block the IR port for normal operation of remote control. Headphone port VIDEO IN AUDIO IN DC IN Kensington Security System Connector (Refer to page 13) USB HDMI RGB IN * When using HDMI/USB connector at the same time, if the size of the jack connecting to the connector is too big, they may not be connected together. Please use standard size jack.
Names of parts Remote Control MUTE Button POWER Button INPUT Button KEYSTONE +, - Button VOLUME +, - Button RETURN Button MENU Button ◉OK, ∧/∨/＜/＞ Button BLANK Button AUTO Button Q.MENU Button USB Button USB control Buttons STILL Button (Functions as the STILL button in any mode other than DivX.) PAGE ꔎ Button MARK Button PAGE ꔏ Button Installing Batteries CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED WITH AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Names of parts Accessories Remote Control 3V Battery Owner’s manual CD Owner’s manual Power Cord Computer Cable Adapter RGB to Component Cable Lens cap and Strap Polishing Cloth Portable bag (*Only for HS200G/HS201G model) ▪▪ U se a remote control up to 6 meters distance and 30 degree (left/ right) within the receiving unit scope. ▪▪ We recommend you to use the remote control under 3 meters distance and 30 degree (left/right) when the cables are connected in the back outputs.
Installing and Composition Installing and Composition Installation Precautions Provide proper ventilation for this projector. • he projector is equipped with ventilation holes(intake) on T the bottom and ventilation holes(exhaust) on the front. Do not block or place anything near these holes. Internal heat build-up may occur, causing picture degradation or damage to the projector. • ever push projector or spill any kind of liquid into N the projector.
Installing and Composition Basic Operation of the Projector 1. Place the projector on a sturdy and horizontal surface with the PC or AV source. 2. Place the projector with the desired distance from the screen. The distance between the projector and the screen determines the actual size of the image. 3. Position the projector so that the lens is set at a right angle to the screen. If the projector is not set at a right angle, the screen image will be crooked.
Installing and Composition How to install the projector using the tripod *Y ou can install this projector using a tripod for the camera. You can assemble the projector instead of the camera on camera tripod. * When stabilizing the tripod, we recommend using the locking bolt of the standard size 4.5 mm or less.The maximum size allowed for the locking bolt is 6.5 mm.(If it is longer than the maximum allowed size, it may damage the projector.
Installing and Composition Turning on the Projector 1. Make sure the power cord is connected correctly. 2. P ress the POWER button on the top cover or the POWER button on the remote control. (The light on the control panel will be turned on.) • Press the INPUT button on the remote control or the INPUT button on the control panel to select the input signal you want.
Connection Connection Connecting to a Desktop PC * You can connect the projector to a computer with VGA, SVGA, XGA, SXGA output. * Refer to page 39 for resolutions the projector supports. < How to connect > 1. onnect the RGB IN of the projector and the computer C output port with a computer cable. 2. onnect the AUDIO IN of the projector and the computC er audio output port with an audio cable. *Y ou may have to change the resolution that your PC exports to one supported by the projector.
Connection Connecting to a DVD Player * Depending on the equipment, the component output jacks (Y, PB, PR) of the DVD Player may be labeled as Y, Pb, Pr/Y, B-Y, R-Y/Y, Cb, Cr. < How to connect a HDMI source > HDMI Cable 1. C onnect the HDMI in of the projector and the HDMI output port of the DVD Player with an HDMI cable. 2. S et the DVD Player's resolution to one of the following: 480p(576p)/720p/1080i/1080p mode. < How to connect a Component source > Audio Cable 1.
Function Function * The On-Screen Display (OSD) in this manual may be slightly different from your projector. * This operating guide explains operation of RGB(PC) mode mainly. PICTURE Menu Options Picture mode Q-Menu * Use the Picture mode function to set the projector for the best picture appearance. Aspect Ratio 1. Press the Q.MENU button on the remote control. Picture Mode 2. Press the ∧, ∨ buttons to move to Picture mode.
Function Picture Reset Function * Settings of the selected PICTURE function for each input and Picture Mode return to the default factory settings. 1. P ress the MENU button. Then, move to PICTURE with the ∧, ∨, ＜, ＞ buttons and press the ◉OK button. 2. P ress the ∧, ∨ buttons to move to Reset and press the ◉OK button. • Press the MENU or RETURN button to exit the menu screen.
Function Color Temperature ꔈ Set to warm to enhance hotter colors such as red, or set to cool to make picture bluish. Dynamic Contrast ꔈ Adjusts the contrast to keep it at the best level according to the brightness of the screen. The picture is improved by making bright parts brighter and dark parts darker. Dynamic Color Noise Reduction Gamma ꔈ Adjusts screen colors so that they look livelier, richer and clearer.
Function SCREEN Menu Options To Change PJT Mode * This function turns the projected image upside down or flips horizontal. 1. P ress the MENU button. Then, move to SCREEN with the ∧, ∨, ＜, ＞ buttons and press the ◉OK button. SCREEN ꔂMove ꔉOK PJT Mode Aspect Ratio Keystone RGB Config. 2. P ress the ∧, ∨ buttons to move to PJT Mode and press the ◉OK button. : Front : 16 : 9 - + 3. M ove to a desired item with the ∧, ∨ buttons and then press the ◉OK button.
Function Auto Configure Function * This function assures you of getting the best video quality by automatically adjusting the horizontal size and synchronization of the image. * Auto Tracking function works in RGB PC input only. Press the AUTO button of the remote control. • If you execute screen adjustment for a video from PC graphic signal, optimal state may not be found. Execute the Auto Configure function for a still image. • You can use this function through the MENU button.
Function AUDIO Menu Options What is FM Wireless Audio? (HS200/HS200G only) FM Wireless Audio is a function to send out audio signals from the projector using FM frequency (88.1 MHz - 107.9 MHz). The frequency of Projector and FM receiver should be same in order to output the sound from FM receiver normally. The signal can be received by using FM receiver within 3m of distance. Audio Signal 88.1 MHz - 107.
Function Installing Instructions (HS200/HS200G Only) • I f used in a medical institution, it may cause an error for medical equipments.Please do not use in a medical establishment. • Please maintain the distance between the projector and FM receiver within 3m. • The sound from FM receiver may not come out in the desired quality if the distance is more than 3m. • P lease adjust the location of FM receiver and its antenna and install them to where it shows a good condition of receiving reception.
Function To listen through the FM receiver speaker (HS200/HS200G Only) 1. P ress the MENU button. Then, move to AUDIO with the ∧, ∨, ＜, ＞ buttons and press the ◉OK button. 2. P ress the ∧, ∨ buttons to move to FM Wireless Audio and press the ◉OK button. AUDIO ꔂMove ꔉOK FM Wireless Audio : Off • Frequency 88.1 MHz Volume 50 Balance 0 L Treble 0 3. Press the ∧, ∨ buttons to move to On and press the ◉OK button. 4. P ress the ∧, ∨ buttons to move to Frequency and press the ◉OK button.
Function Adjusting Speaker Balance * Adjust the left/right sound of speaker to suit your taste and room situations. 1. P ress the MENU button. Then, move to AUDIO with the ∧, ∨, ＜, ＞ buttons and press the ◉OK button. 2. P ress the ∧, ∨ buttons to move to Balance and press the ◉OK button. AUDIO ꔂMove ꔉOK FM Wireless Audio : Off • Frequency 88.1 MHz Volume 50 Balance 0 L Treble 0 R 3. P ress the ＜, ＞ buttons to adjusting audio balance and press the ◉OK button.
Function TIME Menu Options Sleep time Function Q-Menu * The sleep timer turns the projector off at the preset time. 1. Press the Q.MENU button on the remote control. Aspect Ratio 16:9 Picture Mode Vivid Sleep Timer 2. Press the ∧, ∨ buttons to move to Sleep Timer. ꔗ Off 240 Min. ꔃ ꔃ ꔗ ꔗ 10 Min. 180 Min. ꔃ ꔃ Off ꔃ Eject Close 3. Press the ＜, ＞ buttons to select a desired preset time. ꔗ ꔗ Eject USB ꔗ ꔗ 20 Min. 120 Min. ꔃ ꔃ ꔗ 30 Min. ꔃ ꔗ 60 Min. ꔃ ꔗ 90 Min.
Function Using Blank Function * This function may be effective if you need to get the attention of the audience during presentations, meetings or briefings. 1. Press the BLANK button on the remote control. • The screen turns off to a background color. • You can choose the background color. (Refer to ‘Selecting Blank image’) 2. Press any button to cancel the blank function. • T o temporarily turn off the lamp, press BLANK on the remote control.
Function To adjust the brightness of the screen 1. P ress the MENU button. Then, move to OPTION with the ∧, ∨, ＜, ＞ buttons and press the ◉OK button. 2. P ress the ∧, ∨ buttons to move to LED Mode and press the ◉OK button. 3. M ove to a desired item with the ∧, ∨ buttons and then press the ◉OK button.
Function Demo Mode Function 1. P ress the MENU button. Then, move to OPTION with the ∧, ∨, ＜, ＞ buttons and press the ◉OK button. 2. P ress the ∧, ∨ buttons to move to Demo Mode and press the ◉OK button. 3. Press the ∧, ∨ buttons to move to On and press the ◉OKbutton.
USB USB * Image shown may differ from your projector. To use the USB device Connecting the USB device *W hen you connect a USB device, this screen is displayed, automatically. In USB device, you can not add a new folder or delete the existing folder. 1. C onnect the USB device to the USB jack on the back of the set. 2. It turns automatically to DivX Home Menu. PHOTO LIST MUSIC LIST MOVIE LIST USB memory stick Eject USB * Select “Eject” in order to eject a USB device. 1. Press the Q.
USB PHOTO List * It is available to playback the photo file(*.jpg) in the USB device. The On Screen Display may be different from your set. Images are an example to assist with the projector operation. Supported photo file: *.JPG • You can play JPG files only. • Only baseline scan is supported among JPG. - This Projector will not be able to decode most JPEG images saved using the Progressive option.
USB Full Screen Menu 1. P ress the USB button. Then, move to PHOTO LIST with the ＜, ＞ buttons and press the ◉OK button. 2. P ress the ∧, ∨, ＜, ＞ buttons to move to desired photo and press the ◉OK button. 3. P ress the ∧, ∨ buttons to move to View and press the ◉OK button. 4. T he selected photo is displayed in full size and show up the menu. Slideshow BGM Delete Option Hide 5. Use ∧, ∨, ＜, ＞ button to select and control the menu on the full-sized screen.
USB MUSIC List *Y ou can use the Music List menu to play MP3 files form a USB storage device. The On Screen Display on your model may be slightly different. Supported music file: *.MP3 Bit rate range 8Kbps ~ 320Kbps • Sampling rate (Sampling Frequency): MPEG1Layer 3 : 8KHz ~ 48KHz • Music Max Length: 999.59 Sec. This Projector can not play music files less than 16 Kbytes. This Projector cannot play back copy-protected files. Screen Components 1. Moves to upper level file 2.
USB Music Selection and Popup Menu 1. P ress the USB button. Then, move to MUSIC LIST with the ＜, ＞ buttons and press the ◉OK button. MUSIC LIST No Marked Title Arirang ꔛ i 3945 KB,128 Kbps Arirang Play Good Bye Play with Photo 05:30 00:00 / 04:16 Up Folder ꔂ Navigation Duration Up Folder 2. P ress the ∧, ∨, ＜, ＞ buttons to move to a desired music file and press the ◉OK button. 3. M ove to a desired item with the ∧, ∨ buttons and then press the ◉OK button.
USB MOVIE List * The movie list is activated once USB is detected. It is used when playing movie files on projector. Supported Movie File Extension name Video Codec Maximum Resolution supported Frame Audio Codec Explanation MPEG4 AVI m4v Divx DAT MPG MPEG MPE VOB DivX DivX DivX DivX 3.XX 4.XX 5.XX 6.XX Xvid 1.00 Xvid 1.01 Xvid 1.02 Xvid 1.03 Xvid 1.10 Beta1/2 AC3 • Bit rate range 32Kbps ~ 640Kbps • Sampling rate 32KHz, 44.
USB Screen Components 1. Moves to upper level folder 2. Preview: Display the title/folder name of the movie in the selected folder 3. Current page/Total pages 4. Total number of marked movies 5. Corresponding buttons on the remote control 3 MOVIE LIST Page 1/1 4 No Marked Movie Title Duration Up Folder 2 704 x 396 668 MB 1 Up Folder ꔂ Navigation ꔉ PopUp Menu ꘧ Page Change ꘁ Mark ꕉ Exit 5 Movie Selection and Popup Menu 1. P ress the USB button.
USB Playing the Movie * You can adjust various method during the movie play. 1. P ress the USB button. Then, move to MOVIE LIST with the ＜, ＞ buttons and press the ◉OK button. 2. P ress the ∧, ∨, ＜, ＞ move to a desired movie file and press the ◉OK button. 3. P ress the ∧, ∨ buttons to move to Play and press the ◉OK button. Option ◆ Use of remote control ꔈ Press ꔈ Press ꔈ Press ꔈ Press ꔈ Press ꔈ Press the the the the the the ◀◀ (REW) button to rewind. ▶▶ (FF) button to forward fast.
USB To See The DivX Registration Code * Confirm the DivX registration code number of the projector. Using the registration number, movies can be rented or purchased at www.divx.com/vod. 1. P ress the MENU button. Then, move to USB with the ∧, ∨, ＜, ＞ buttons and press the ◉OK button. 2. P ress the ∧, ∨ buttons to move to DivX Reg. Code and press the ◉OK button. USB ꔂMove ꔉOK Photo List Music List Movie List DivX Reg. Code Deactivation 3. You can see the DivX registration code of the projector.
Information Information Supported Monitor Display * The following table lists the display formats supported by the projector. Format Horizontal Freq.(kHz) Vertical Freq.(Hz) * If the projector does not support the input signal, “Out of Range” message appears on the screen. * The projector supports DDC1/2B type as Plug & Play function. (Auto recognition of PC monitor) * PC synchronization signal types supported :Separate type synchronization.
Information Maintenance *The projector needs little maintenance. You should keep the lens clean because any dirt or stains may appear on the screen. If any parts need to be replaced, contact your dealer. When cleaning any part of the projector, always turn the power off and unplug the projector first. Cleaning the lens If there is any dust or stain on the surface of the lens, you must always clean the lens.
Information Specifications MODEL HS200 (HS200-JE) / HS200G (HS200G-JE) HS201 (HS201-JE) / HS201G (HS201G-JE) Resolution 800(Horizontal) x 600(Vertical) pixel Horizontal / Vertical Ratio 4:3(horizontal:vertical) Panel size (mm) 13.97 Screen size (Projection distance) 0.44 m - 2.41 m (38.1 cm - 302.2 cm) Projection Offset 100% Remote control distance 6m Video compatibility NTSC/PAL/SECAM/NTSC4.43/PAL-M/PAL-N/PAL-60 Power 19 V , 4.
The model and serial number of the projector is located on the back or one side of the projector. Record it below should you ever need service.
