User guide

42
Timer Recording with
SHOWVIEW
®
System
This system makes programming timer recordings
very simple. Most TV guides publish SHOWVIEW
programming numbers with their program details.If
you want to make a timer recording of a program, you
just input the corresponding S
HOWVIEW programming
number. The date, start, stop and channel settings are
made automatically. All you have to do is tell the
recorder the recording mode, and whether it’s a once-
only recording, or a regular recording.
Up to 16 timer programs can be stored in the
recorder.
S
HOWVIEW is a registered trademarks of Gemstar
Development Corporation.
The S
HOWVIEW System is manufactured under license
from Gemstar Development Corporation.
1. Press SHOWVIEW button.
The S
HOWVIEW menu will appear.
Press SHOWVIEW button again to exit the menu.
 [Number] Enter the SHOWVIEW programming
number.
 [Repeat] Choose a desired repeat (Once,
Daily (Monday - Friday), or Weekly).
2. Press the number buttons to enter the S
HOWVIEW
programming number.
 If you make a mistake, press CLEAR
repeatedly and re-enter the correct number.
 If you want to change the entered number one
by one, press b / B, and press v , V or the
number buttons.
3. Press ENTER.
The media, programme position, date, start and
end times and repeat type appear on the TV
screen.
4. You can change the information as required using
b / B / v / V (Media, VPS/PDC, etc.)
Refer to “Timer Recording” on previous page.
5. Set a recording mode as necessary by pressing
REC MODE repeatedly. (XP, SP, LP, EP)
6. Press ENTER, the program will be memorized by
the recorder.
To check the programming, the Timer Record List
will appear.
Check field’s “Rec. OK” on the Timer Record List
indicates that the timer recording is programmed
correctly.
7. Press RETURN (O) to exit the Timer Record
menu.
8. Make sure that you load a recordable disc for DVD
recording and press POWER to switch your unit to
Standby.