ENGLISH OWNER’S MANUAL DVD SOUND BAR Please read this manual carefully before operating your set and retain it for future reference. MODEL HLT45W (HLT45W, SHT35-D) P/NO : MFL67084774 HLT45W-F2_DRUSLL_ENG_4774.
1 Safety Information Safety Information 1 Safety Information CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USERSERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Safety Information WARNING: Do not install this equipment in a confined space such as a book case or similar unit. This device is equipped with a portable battery or accumulator. CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Safe way to remove the battery or the battery from the equipment: Disposal of your old appliance 1.
Contents Contents 20 AUX In Connection 20 AUDIO (PORT.
Contents 5 Appendix 31 Changing subtitle code page 32 Viewing a PHOTO file 32 Options while viewing a photo 39 Language Codes 33 Sleep Timer Setting 40 Area Codes 33 Turn off the sound temporarily 33 Last Scene Memory 41 Trademarks and Licenses 33 System Select - Optional 42 Specifications 33 Adjust the speaker level 1 2 settings 33 34 VOCAL FADER Radio Operations 34 Listening to the radio 34 Presetting the Radio Stations 34 Deleting all the saved stations 34 Deleting a
Preparation 2 Preparation 2 Preparation Unique Features Accessories Portable In Please check and identify the supplied accessories. Listens to music from your portable device. (MP3, Notebook, etc) USB Direct Recording Records music from CD to your USB device. Remote control (1) Batteries (2) FM antenna (1) Video cable (1) WALL BRACKET INSTALL GUIDE (1) Wall bracket (1) Unit brackets (2) Screw (4) Full HD up-scaling Views Full HD picture quality with simple setup.
Preparation Introduction Playable Discs DVD-VIDEO (8 cm / 12 cm disc) Discs such as movies that can be purchased or rented. Symbol Used in this Manual All discs and file listed below ALL MP3 files MP3 DVD and finalized DVD±R/RW DVD WMA files WMA DivX files DivX Audio CDs ACD JPG files JPG NOTE Indicates special notes and operating features.
Preparation Playable file Requirement DivX file compatibility with this unit is limited as follows : • Available resolution: within 720x576 (W x H) pixels. • The file name of the DivX subtitle should be entered within 45 characters. • If there is impossible code to express in the DivX file, it may be displayed as " _ " mark on the display. • Frame rate : less than 30 fps. • If the video and audio structure of recorded files is not interleaved, either video or audio is outputted.
Preparation Remote control t RADIO&INPUT: Changes input sources. • • • • • • • • • • b • • • • • • • • • 0 to 9 numerical buttons : Selects numbered options in a menu. Remote control OPEN / CLOSE a RADIO & INPUT REPEAT SKIP c ./> SKIP : Goes to next or previous chapter/ track/ file. SCAN m/M SCAN : Searches backward or forward. SKIP x (STOP) : Stops playback or recording. MONO/STEREO SPEAKER LEVEL d B (PLAY), MONO/STEREO : Starts playback. Selects Mono/ Stereo.
Preparation TUNING -/+ : Tunes in the desired radio station. Remote control OPEN / CLOSE a RADIO & INPUT O RETURN : Moves backwards in the menu or exits the setup menu. TITLE : If the current DVD title has a menu, the title menu appears on the screen. Otherwise, the disc menu may not appear. b 2 CLEAR REPEAT Preparation SKIP c SCAN DISC MENU : Accesses the menu on a DVD disc. • • • • • • • • • • f • • • • • • • • • SKIP MONO/STEREO ECHO VOL -/+ : Adjusts echo volume.
Preparation 11 Front panel A BC D E 2 Preparation A Microphone E Disc slot B PORT. IN C USB Port D Touch buttons • 1 STANDBY/ON • i|| (PLAY / PAUSE) FUNC. ( ) Press and hold down this button for about 3 seconds, then press repeatedly to select other function. • - VOL + Adjusts speaker volume. • s (STOP) • Ejects or inserts disc. Touch the blue or red LED button to operate the unit. CAUTION Precautions in using the touch buttons • Use the touch buttons with clean and dry hands.
Preparation Rear panel E 2 A Preparation B C D A Antenna Connector D HDMI OUT B AUX IN (L/R) E OPTICAL IN C VIDEO OUT HLT45W-F2_DRUSLL_ENG_4774.
Installation 13 3 Installation Mounting the main unit on a wall You can mount the main unit on a wall. Prepare screws and brackets supplied. 2. When you mount it on a wall (concrete), use the wall plugs (Not supplied). You should drill some holes. A guide sheet (WALL BRACKET INSTALL GUIDE) is supplied to drill. Use the sheet to check the point to drill. Step 2 Preperation 3 Installation Unit Wall bracket Screws Unit bracket WALL BRACKET INSTALL GUIDE 1.
Installation 3. Remove the WALL BRACKET INSTALL GUIDE. 4. Fix it with screws (not supplied) as shown in the illustration below. 6. Remove the stand from the unit. Step 6 Step 4 3 Installation 7. Hang the main unit onto the brackets, as shown below. 5. Attach the unit bracket to the unit with screws (supplied) as shown in the illustration below. Step 7 Step 5 NOTE Detach the unit from the bracket as shown below. CAUTION • Do not hang onto the installed unit and avoid any impact to the unit.
Installation Setting up Wireless connection LED indicator of wireless subwoofer Setting an ID for the wireless subwoofer When the unit is manufactured, the ID is already set. If interference occurs or you use a new wireless subwoofer, an ID should be set again. 1. Press HOME ( ). Operation 2. Use I/i to select the [Setup] and press ENTER ( ). The [Setup] menu appears. Blue The wireless subwoofer is receiving the signal of the unit. 3.
Installation NOTE • If there is a strong electromagnetic wave product nearby, interference may occur. Put the unit (Wireless subwoofer and main unit) away from there. • If you operate main unit then wireless subwoofer (rear speakers) sound within a few seconds in standby mode. • Set the distance between this unit and subwoofer Receiver within 10 m (32 ft.). 3 Installation • Optimum performance can be implemented only when the unit and the Wireless subwoofer within distance of 2 m (6 ft.
Installation Connections to Your TV Make one of the following connections, depending on the capabilities of your existing equipment. NOTE 17 HDMI Out Connection If you have a HDMI TV or monitor, you can connect it to this unit using a HDMI cable. Connect the HDMI OUT jack on the unit to the HDMI IN jack on a HDMI compatible TV or monitor. Set the TV’s source to HDMI (refer to TV’s Owner’s manual).
Installation NOTE • If a connected HDMI device does not accept the audio output of the unit, the HDMI device ’s audio sound may be distorted or may not output. • When you connect a HDMI or DVI compatible device make sure of the following: - Try switching off the HDMI/DVI device and this unit. Next, switch on the HDMI/DVI device and leave it for around 30 seconds, then switch on this unit. Video Connection Connect the VIDEO OUT jack on the unit to the video in jack on the TV using a video cable.
Installation Resolution Setting The player provides several output resolutions for HDMI OUT jacks. You can change the resolution using [Setup] menu. 1. Press 19 Video Output Resolution HOME. 2. Use I/i to select the [Setup] and press ENTER. The [Setup] menu appears. [HDMI OUT]: 1080p, 1080i, 720p and 576p (or 480p) and 576i (or 480i) [VIDEO OUT]: 576i (or 480i) 3 4. Use U/u to select the [Resolution] option then press i to move to the third level. Installation 3.
Installation Optional Equipment Connection AUDIO (PORT. IN) In Connection Connect an output of portable device (MP3 or PMP etc) to the AUDIO (PORT. IN) input connector. PORT.IN Connection AUX In Connection Connect an Output of auxiliary device to the AUX (L/R) INPUT Connector. AUX IN Connection 3 Installation MP3 player, etc... Listening to music from your portable player or external device Unit The unit can be used to play the music from many types of portable player or external devices.
Installation USB Connection Connect the USB port of USB Memory (or MP3 player, etc.) to the USB port on the front of the unit. 21 Compatible USB Devices • MP3 Player : Flash type MP3 player. • USB Flash Drive : Devices that support USB2.0 or USB1.1. • The USB function of this unit does not support some USB devices. USB Connection USB device requirement 1. Choose a different function mode or press STOP (x) twice in a row. 2. Remove the USB device from the unit. HLT45W-F2_DRUSLL_ENG_4774.
Installation OPTICAL In connection Antenna Connection Connect an optical output of Unit (or Digital Device etc) to the OPTICAL IN connector. OPTICAL IN Connection Connect the supplied FM antenna for listening to the radio. Connect the FM Wire antenna to the FM antenna connector. Antenna Connection 3 Installation To the digital optical output jack of your component Home theater speaker ez setup Listen to sound from TV, DVD and Digital Device with 3.1 ch mode.
Installation Adjust the setup settings By using the Setup menu, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup menu item, see pages 23 to 27. During the first use of this unit, the initial language setup menu appears on your TV screen. You must complete initial language selection before using the unit. English will be selected as the initial language. 1.
Installation Language Menu Language Select a language for the Setup menu and then on screen display. Disc Audio / Disc Subtitle / Disc Menu Select the language you prefer for the audio track (disc audio), subtitles, and the disc menu. 3 [Original] Refers to the original language in which the disc was recorded. Installation [Other] To select another language, press numeric buttons and then ENTER to enter the corresponding 4-digit number according to the language code list on the page 39.
Installation Audio 3.1 Speaker Setup Make the following settings for the built-in 5.1 channel surround decoder. 1. Select [3.1 Speaker Setup] on the [Audio] menu. 2. Press ENTER. The [3.1 SPEAKER] appears. 4. Adjust options using U u I i buttons. 5. Returns to the previous menu by pressing O RETURN. [Speaker selection] Select a speaker that you want to adjust. [Size] Since the speaker settings are fixed, you cannot change the settings.
Installation HD AV Sync Sometimes Digital TV encounters a delay between picture and sound. If this happens you can compensate by setting a delay on the sound so that it effectively ‘waits’ for the picture to arrive: this is called HD AV Sync. Use U u (on the remote control) to scroll up and down through the delay amount, which you can set at anything between 0 and 300m sec.
Installation Password You can enter or change password. 1. Select [Password] on the [Lock] menu and then press i. 2. Press ENTER. 3. Input a password and press ENTER. To change the password, press ENTER when the [Change] option is highlighted. Input a password and press ENTER. Enter it again and press ENTER to verify. 4. Press HOME to exit the menu. If you forget your password, you can clear it using the following steps: 1. Select the [Setup] menu on the [Home] menu. 2.
Operation 4 Operation 4 Using the Home Menu Basic Operations 1. Press HOME. Displays the [Home menu]. 1. Insert the disc by using the Z OPEN/ CLOSE or Connect the USB device to the USB port. 2. Select an option by using I i. Operation 3. Press ENTER then selected option menu. [Music] – Displays [MUSIC] menu. [Movie] – Start video media’s playback or display the [MOVIE] menu. 2. Press HOME. Displays the [Home] Menu. [Photo] – Displays [PHOTO] menu. 3. Select an option by using I i.
Operation To Stop Do this Press B (PLAY), MONO/ STEREO. Pause Press X (PAUSE/STEP). Press X (PAUSE/STEP) repeatedly to play title Frame-by-Frame. (DVD, DivX only) During playback, press Locating a m/M SCAN repeatedly point quickly to select the required scan by playing speed. a file in fast To return to normal speed, forward or fast press B (PLAY), MONO/ reverse STEREO. Press REPEAT repeatedly, and the current title, chapter or track will be played back repeatedly or randomly.
Operation To display the DVD Menu DVD When you play a DVD which contains several menu, you can select the menu you want using the Menu. 1. Press DISC MENU. The disc’s menu appears. DVD When you play a DVD which contains several title, you can select the title you want using the Menu. 1. Press TITLE. The disc’s title appears. Operation 2. Select the menu by pressing U u I i. 3. Press B (PLAY), MONO/STEREO to confirm. 1.5 times speed playback 3.
Operation Marked Playback ACD MP3 NOTE WMA The mark function enables you to store your favourite files from any disc or USB device in the unit memory. 1. Select [Music] on the [Home] menu. Music menu Returning to the upper folder. (MP3/ WMA only) File information will be displayed according to the ID3TAG information on the appropriate music file. (MP3 only) If you want to select all files on the list, select [Select All] and press ENTER. To delete a Marker 1.
Operation Viewing a PHOTO file JPG About help menu in the full screen. This unit can play discs with photo files. Menu 1. Select [Photo] on the [Home] menu and press ENTER. Menu Photo menu Moving to the previous or next file list. Buttons INFO/ DISPLAY Operation Displaying the Option menu. b/B Prev./ Next I/i Moving to another file O Close O RETURN Returning to the [Photo] menu. Options while viewing a photo You can use various options while viewing a photo in full screen. 4 1.
Operation Sleep Timer Setting System Select - Optional Press SLEEP repeatedly to select the desired time period options (in minutes): (Display window off (LCD OFF) t Sleep timer value t Display on) In display window you see “LCD OFF” or Sleep timer value and the display window turns off. To check the remaining time, press SLEEP. To cancel the sleep function, press SLEEP repeatedly until “SLEEP 10” appears, and then press SLEEP once again while “SLEEP 10” is displayed.
Operation Radio Operations Deleting all the saved stations 1. Press and hold CLEAR for two seconds. "ERASE ALL" will flash up on the unit display. Be sure that both FM aerials are connected. (Refer to the page 22) 2. Press CLEAR to erase all saved of the radio stations. Listening to the radio Deleting a saved station 1. Press t RADIO&INPUT until FM appears in the display window. The last received station is tuned in. 1. Press PRESET - / + to select a preset number you want to delete. 2.
Operation Sound adjustment Setting the surround mode This system has a number of pre-set surround sound fields. You can select a desired sound mode by using SOUND EFFECT. You can change the SOUND EFFECT using I i arrow key while the sound effect information is displayed on. The displayed items for the equalizer may be different depending on sound sources and effects. Description NAT PLUS The NAT PLUS is Natural Plus sound effect. You can enjoy the natural sound effect same as a 5.1-channel.
Operation Advanced Operations Recording to USB You can record music or sound souce to USB device by connecting to the port on the unit. 1. Connect the USB device to the unit. 2. Select a mode in which you want to record. Play back a sound source first. 3. Start the recording by pressing z REC. 4. To stop recording, press x (STOP). [All tracks/ files recording] Record to USB in stop or play mode.
Maintenance 37 5 Maintenance Notes on Discs Handling the Unit Handling Discs When shipping the unit Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory. Never stick paper or tape on the disc. Keeping the exterior surfaces clean Do not use volatile liquids such as insecticide spray near the unit. After playing, store the disc in its case.
Troubleshooting 6 Troubleshooting PROBLEM CAUSE CORRECTION Plug the power cord into the wall outlet No power The power cord is disconnected. securely. Select the appropriate video input mode The TV is not set to receive the DVD signal. on the TV so the picture from the unit appears on the TV screen. No picture The video cables are not connected Connect the video cables securely to both securely. the TV and unit.
Appendix 39 7 Appendix Language Codes Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.
Appendix Area Codes Choose an area code from this list.
Appendix Trademarks and Licenses Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC. 41 What is SIMPLINK? Some functions of this unit are controlled by TV’s remote control when this unit and LG TV with SIMPLINK are connected through HDMI connection.
Appendix Specifications General • Power requirements: Refer to main label. • Power consumption: Refer to main label. • Dimensions (W x H x D): 800 X 160 X 80 mm without foot • Net Weight (Approx.): 4.6 kg • Operating temperature: 41 °F to 95 °F (5 °C to 35 °C) • Operating humidity: 5 % to 90 % • Bus Power supply (USB): DC 5 V 500 mA Inputs/ Outputs • VIDEO OUT: 1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1 Appendix • HDMI OUT (video/audio): 19 pin (HDMI standard, Type A) HDMI version : 1.
Импортер LG Electronics RUS Адрес импортера 143160 Российская Федерация, Московская область, Рузский район, сельское поселение Дороховское, 86 км. Минского шоссе, д.9 Адрес производителя : ЛГ Электроникс инк. Китай, г. Хучжоу, Индустриальный парк, Зона развития Зонг Каи, ул. Хью Фенг Донг, 13 Сделано в Китае HLT45W-F2_DRUSLL_ENG_4774.
