User guide

34 Operation
Operation
 4
Radio Operations
Be sure that FM aerial is connected (Refer to
the page 22)
Listening to the radio
1. Press
t
RADIO&INPUT until FM appears
in the display window.
The last received station is tuned in.
2. Press and hold TUNING (-/+) for about
two seconds until the frequency indication
starts to change, then release. Scanning
stops when the unit tunes in a station.
or
Press TUNING (-/+) repeatedly.
3. Adjust the volume by rotating VOLUME on
the front panel or by pressing VOL (+/- )on
the remote control repeatedly.
Presetting the Radio Stations
You can preset 50 stations for FM.
Before tuning, make sure that you have turned
down the volume.
1. Press
t
RADIO&INPUT until FM appears
in the display window.
2. Select the desired frequency by using
TUNING (-/+).
3. Press

ENTER a preset number will ash
in the display window.
4. Press PRESET (-/+) to select the preset
number you want.
5. Press

ENTER.
The station is stored.
6. Repeat the steps 2 to 5 to store other
stations.
Deleting all the saved stations
1. Press and hold CLEAR for two seconds.
“ERASE ALL” will ash up on the unit display.
2. Press CLEAR to erase all saved of the radio
stations.
Deleting a saved station
1. Press PRESET - / + to select a preset
number you want to delete.
2. Press CLEAR, the preset number will blink
in the display window.
3. Press CLEAR again, to delete the selected
preset number.
Improving poor FM reception
Press
B
(PLAY), MONO/STEREO on the
remote control. This will change the tuner
from stereo to mono and usually improve the
reception.
Seeing information about a radio
station
The FM tuner is supplied with the RDS (Radio
Data System) facility. This shows information
about the radio station being listened to. Press
RDS repeatedly to cycle through the various
data types. :
PS (Programme Service Name)
The name of the channel will appear
in the display
PTY (Programme Type Recognition)
The programme type (e.g. Jazz or
News) will appear in the display.
RT (Radio Text)
A text message contains special
information from the broadcast
station. This text may scroll across
the display.
CT (Time controlled by the channel)
This shows the time and date as
broadcast by the station.
You can search the radio stations by
programme type by pressing RDS. The display
will show the last PTY in use. Press PTY
one or more times to select your preferred
programme type. Press
I i
. The tuner will
search automatically, when a station is found
the search will stop.
HLT35W-D0_DDEULL_ENG_4717.indd 34 2011-01-21 �� 6:05:09