User guide

Sound Bar System | User Guide
9
Playing from USB - more you can do
Skipping to a track
Press
./>
on the remote control. When
.
button is pressed once
midway through a track, the unit returns to the start of that le. When it is
pressed again, a le is skipped each time the button is pressed.
Pausing or restarting a playback
Press B/X on the remote control during playback. Press the button again
to resume.
Repeat/ Random play
To play repeatedly, press USB REPEAT on the remote control.
To play randomly, press USB RANDOM on the remote control.
Compatible USB Devices
• MP3 Player : Flash type MP3 player.
• USB Flash Drive : Devices that support USB 2.0 or USB 1.1.
• The USB function may not be available depending on devices.
• Devices which require additional program installation when you have
connected it to a computer, are not supported.
Look out for the follows
• Do not extract the USB device while in operation.
• For a large capacity USB, it may take longer than a few minute to be
searched.
• To prevent data loss, back up all data.
• If you use a USB extension cable or USB hub, the USB device is not
recognized.
• Using NTFS le system is not supported. (Only FAT 16/32 le system is
supported.)
• This unit is not supported when the total number of les is 1000 or more.
• External HDD, Locked devices or hard type USB devices are not
supported.
• USB port of the unit can not be connected to PC. This unit can not be
used as a storage device.
• Only MP3/WMA le system is supported.
Playing from USB
ON UNIT ON REMOTE
1 Open the front slide door. - -
2 Connect a USB device: - -
3 Play: -
B/X