User guide

18
Note: If there is no DHCP server on the network and you want to set
the IP address manually, select [Static] then set the [IP Address],
[Subnet Mask], [Gateway] and [DNS Server] using v V b B and
numerical buttons. If you make a mistake while entering a number,
press CLEAR to clear the highlighted part.
3. Select [OK] and press ENTER to apply network settings.
5. If you select [Test] and press ENTER at step 5 above, the network
connection status is displayed on the screen.
You can also test it on the [Connection Status] in the [Setup] menu.
4.
The player will ask you to test the
network connection. Select [OK]
and press ENTER to complete the
network connection.
Internet
connection status
Local Area
Network status
HLB34S-DP_BDEULL_ENG_4224 1/8/10 5:51 PM Page 18