User's Manual

900MHz DSST PHONE, CALLER ID ON CALL WAITING and ANSWERING SYSTEM.
SYMPTOM CORRECTIVE ACTION
NO DAT A
☛
☛☛
☛
Check your service
. Call your local phone company to ensure that you have
Caller ID
or
Call Waiting ID
service.
☛
☛☛
☛
Check the answering machine
. Ensure that your answering machine is set to
answer after two rings.
☛
☛☛
☛
You answered the call before two rings
.
☛
☛☛
☛
Check call Forwarding.
Ensure that Call Forwarding is turned off.
☛
☛☛
☛
Contact your local phone company’s Service Department
If the problem continues for more than 24 hours.
Your local phone company central office may be
temporarily experiencing an overload.
INCOMPLETE DATA
☛
☛☛
☛
Call information was distorted before reaching the unit.
Normal static on the telephone line can cause a line error and an
INCOMPLETE DATA message. If this condition persists, check with your local
telephone company to ensure that there is not a problem with your phone line.
Handset does not
☛
☛☛
☛
Check that the AC adapter is plugged in and operating correctly.
Charge
.
☛
☛☛
☛
Check whether the handset is making contact in the cradle.
PAGE key does
☛
☛☛
☛
The handset is not communicating with the base.
not page
The handset is either turned off, out of range, or the battery needs recharging.
the handset
Handset does not
☛
☛☛
☛
Check the AC adapter.
Be sure that the adapter is not damaged and that
work
it is securely plugged into a working Outlet and the phone jack.
Also check that the wall plug is not controlled by a wall switch or a power strip.
☛
☛☛
☛
Verify that the handset is turned on
☛
☛☛
☛
place the in the cradle for several seconds.
Ensure the handset is making contact in the cradle.
☛
☛☛
☛
Recharge the battery.