User's Manual

900MHz DSST PHONE, CALLER ID ON CALL WAITING and ANSWERING SYSTEM.
Preset Message
The following message is pre-recorded
“Hello, I cannot receive your call, Please leave your message after a beep. Thank you.”
Recording your personal Outgoing Message(OGM)
1. Press
RECORD
key in stand-by mode.
The answering system announces explanation and LED counts recording time.
Record your message. ( MAX 20 sec)
3. Whe n you fi nish recording yo ur message, Press •
/
•
(play/stop)
button.
A tone sounds. Your message plays back for your review.
CHOICE BETWEEN THE PRE-RECORDED GREETING AND YOUR PERSONAL GREETING
1. Press
OUT DOOR
button. The answering system announce choosing OGM.
2. To choose your personal outgoing message, press
|
•• button.
To choose pre-recorded outgoing message, press ••
|
button
The answering system anno unces your selecting OGM.
SETTING THE RING TIME
1. Press
PROGRAM
button
2. Press
RECORD
button
3. Press
|
•• or ••
|
button until you input correct ring time.(2~9)
TOLL SAVE
In the TOLL SAVE is ON, if you have new messages, the answering system answers after one ring.
If there are no new messages, the system answers after four rings. This way, when you call long distance to check your
messages, and have no message, yo u ca n hang up after the second ring to save a charge.
SETTING A PIN CODE
To listen to your messages from a remote location, you will need to enter a four digit Personal Identification Number(PIN)
code(0000 ~ 9999).
1. Press
PROGRAM
button.
2. Press
OUT DOOR
button.
3. Press
|
•• or ••
|
button until you input correct PIN code (1-digit)
4. Press PROGRAM key.
5. Repeat 3 and 4 commands until you can input 4 digits PIN code
6. Your PIN code plays back for your review.
PLAYING YOUR MESSAGES
The base 7-segment LED displays the total number of messages.
1.press •
/
•
(play/stop)
The system announces messages.