Owners manual

61
Pairing with another Bluetooth device
When you pair your GD910 with another device, you can
set up a passcode-protected connection. This means your
pairing is more secure.
1 Check that your Bluetooth is on and Visible. You can
change your visibility in the Settings menu, by selecting
My device visibility and then Visible.
2 Touch Search.
* To turn Bluetooth on:
1 In the Bluetooth menu, touch Bluetooth to turn it on as
shown in the figure below.
2 To turn Bluetooth off, touch Bluetooth again.
If Bluetooth is off, you will see the icon on your
screen.
If Bluetooth is on, you will see the
icon on your
screen.
3 Your GD910 will search for devices. When the search
has completed, you can see the list of devices found and
Refresh will appear on screen.
4 Choose the device you want to pair with, then enter a
passcode, and then choose OK.
Settings
GD910_Singapore_E_1.0_0918.indd 61 2009.9.19 1:28:14 AM