User guide

Note
Reversing the doors is not covered by the warranty.
33
24
33
33
25
34
19
27
28
29
23
26
30
31
32
26
29
18
9
17
5
6
11
3
2
3
2
23
23
23
24
2
5
2
6
4. Destroy the two small caps on the front of the cover front
with a screw driver, then separate the screw and . Separate
the cover front . Move the wire to left, install the c
over
front and the screw. Take the small caps out of the alter
nate
bag, then install the small c
aps.
28
28
27
27
19
29
5. Remove the small cap of the refrigerator door , then
separate the small cap . Move the cable from left to
the
corresponding position on the right. Install the small cap
,
then install the small cap on the corresponding positio
n on
the ri
ght.
7. Separate the cap on the right side of the door, then install it
into the left screw hole (you can see this hole after the left ha
ndle
is removed). Install the handle and the screw which previo
us
ly
separated on the corresponding position on the right.
(The
hidden handle does not need this procedure) Then Install
at
ion
compl
eted.
37
9 11
18
19
34
30
26 29
31
32
6
6. Install the hinge lower and the freezer door , then install
the hinge middle . Separate the cap on the upper left
.
Inst
all the refrigerator door , take the hinge upper out of the
alter
nate bag and install it on upper left. Pull out the wire
from
the individual holes and connect these cables. Take the small
c
aps out of the alternate bag, then install the small caps.
Inst
all base cover .