ENGLISH GPRS Phone USER’S MANUAL MODEL : G5200 Please read this manual carefully before operating your set. Retain it for future reference.
G5200 has a polished style which provides users’ a better feel and convenience.
For Your Safety All radio transmitters carry risks of interference with electronics in close proximity. GSM Phones must be switched off at all times in an aircraft. Do not activate near petrol stations, fuel depots, chemical plants or blasting operations. Switch off the phone in any area where are forced by special regulations. For example, the phone does not allow to be used in hospital because pacemakers and hearing aids can be affected. Minor interference may affect TVs, radios, PCs, etc.
Do not touch the charger with wet hands. Please note: Use only specified batteries and chargers as others can damage the phone. Unusable batteries should be disposed of in accordance with relevant legislation. Only use ORIGINAL accessories to avoid damage to your phone. Emergency call may not be available under all cellular networks. Therefore, you should never depend solely on the phone for essential communications such as medical emergencies.
Contents Overview Accessories ......................................................................... 10 Part of the Phone ................................................................ 12 • Front of the Phone ............................................................ 12 • Rear of the Phone ............................................................. 13 • Sub LCD of the phone ...................................................... 14 Key Description ....................................................
Access Codes ...................................................................... 24 • PIN code (4 to 8 digits) ..................................................... 24 • PIN2 code (4 to 8 digits) ................................................... 24 • PUK code (4 to 8 digits) .................................................... 24 • PUK2 code (4 to 8 digits) .................................................. 24 • Security code (4 to 8 digits) ..............................................
ENGLISH Call register [Menu 2] ............................................................52 • Missed calls [Menu 2-1] ..................................................... 52 • Received calls [Menu 2-2] .................................................. 52 • Dialled calls [Menu 2-3] ...................................................... 52 • All calls list [Menu 2-4] .......................................................52 • Clear recent calls [Menu 2-5] .............................................
Scheduler [Menu 6] .............................................................. 77 • New [Menu 6-1] .................................................................. 78 • View day [Menu 6-2] .......................................................... 79 • View all [Menu 6-3] ............................................................ 80 • Delete last [Menu 6-4] ........................................................ 80 • Delete all [Menu 6-5] ...........................................................
Accessories Overview Check to make sure that you have all the parts shown below.
Overview Cigar Lighter Adapter Handsfree Kit ENGLISH 11
Part of the Phone Overview Front of the Phone 1 2 3 16 4 10 5 6 7 11 12 8 13 14 9 15 ENGLISH 1 2 3 4 5 6 7 8 12 Earpiece Active Folder Display Screen Soft Left Key Up/Down Side Key Confirm Key Send Key Vibration Key 9 10 11 12 13 14 15 16 Star Key Soft Right Key End/Power Key Cancel Key Numeric Keys Hash Key Microphone Message key
Overview Rear of the Phone 6 5 4 1 3 2 1 Battery 2 Cable Connector/ Battery Charging Connector/ Hands-Free Car kit Connector 3 4 5 6 Battery Terminals SIM Card Socket Handstrap Hole Battery Lock ENGLISH 13
Part of the Phone Overview Sub LCD of the phone 1 Sub LCD 2 Call Indicator Light 3 Front Key 1 You can view the icon of receiving text message or voicemail even not opening folder. In addition, you can check the name and number for incoming and outgoing calls. 2 You can check the network status through this indicator. Depending on Group setting, you can also change its color. 3 If you press this key for a long time in a standby mode with closing a folder, you can convert the vibration mode.
Key Description Overview The following shows key components of the phone. Keypad Description Key Description Soft Left Key / Soft Right Key Each of these keys performs the function indicated by the text on the display immediately above it. Vibration key You can activate the vibration directly. Message key You can go to Message menu directly without scrolling. Navigation Keys Used to scroll through name, phone numbers, menus or setting options. Send Key You can dial a phone number and answer a call.
Key Description Overview Side of the Key Key Description Up/Down Side Key You can control the volume of key tone in standby mode and also control the volume during a call. Alphanumeric Keys The alphabet and numerical keypad mapping relation are listed as the following table. Key Description .
Display Information Display Information The screen displays several icons the following describe each of them you may see on the phone. On-Screen Icons Icon/Indicator Description Tells you the strength of the network signal. Call is connected. You can use GPRS service. Shows that you are using a roaming service. Line 1/2 is in use for outgoing calls - If you subscribe to the Two Line Service. The alarm has been set and is on. Tells you the status of the battery. You have received a text message.
Display Information Display Information Icon/Indicator Description Headset menu in profile. Car menu in profile. You can divert a call.
Installation Getting Started ➊ Inserting the SIM Card Locate the SIM card socket in the back of the phone. Follow the steps below to install the SIM card. 1. Remove the battery if attached. 2. Slide the SIM card into the slot, under the silvery holders, with the golden connectors facing down and the cut corner to the right, Notice • Before installing always make sure that the phone is switched off and remove the battery. • The metal contact of the SIM card can be easily damaged by scratches.
Installation Getting Started 2. Push it until you hear a click. ➌ Charging the Battery To connect the travel adapter to the phone, you must have installed the battery. 1. Insert one end of the travel adapter into the bottom of the phone. 2. Connect the other end of the travel adapter to an AC wall outlet. Use only the included packing charger. ENGLISH Warning • Do not force the connector as this may damage the phone and/or the travel adapter.
Getting Started ➍ Disconnecting the charger Disconnect the travel adapter from the phone by pressing its side buttons. Note • Remember to fully charge the used battery after changing the batteries. • Do not remove your battery or the SIM card while charging. • The moving bars of battery icon will stop after charging completely. Note • In case of not charging the battery properly... 1. After switching On/Off Power key, please try to recharge it. 2.
Powering On Sequence Getting Started ➊ To get started with the phone 1. Press and hold hear a tone. key until you 2. Depending on setting PIN code request, you can enter PIN code or not. 3. If your phone connects to a network, the network name will be displayed shortly. ➋ To turn off the phone In standby mode, press and hold ENGLISH 22 key until you hear a tone.
Making and Answering calls Getting Started Making a call 1. Key in phone number including the area code, To edit a number on the display, press , to move cursor to the left and press to move cursor to the right. 2. Press to call the number. 3. Press to end the call. International Calls 1. Press and hold the key for the international prefix. character may replace with the international access code. 2. Enter the country code, area code, and the phone number. 3. Press .
Access Codes Getting Started You can use the access codes described in this section to avoid unauthorized use of your phone. The access codes (except PUK1 and PUK2 codes) can be changed by using [Menu 4-5-4]. PIN code (4 to 8 digits) The PIN (Personal Identification Number) code protects your SIM card against unauthorized use. The PIN code is usually supplied with the SIM card. When PIN code request is set Enable, your phone will request the PIN code every time it is switched on.
Getting Started PUK2 code (4 to 8 digits) The PUK2 code, supplied with some SIM cards, is required to change a blocked PIN2 code. If you lose the code, also contact your service provider. Security code (4 to 8 digits) The security code protests the unauthorized use of your phone. It is usually supplied with the phone. This code is required to delete all phone entries and to activate “Restore factory settings” menu. The default number is “1234”.
Phonebook Accessing the Menu To select a menu in phonebook, press [Names] in standby mode and then scroll to a desired item. Name Description Description 1 Search Allows you to search for a specific name, number. 2 Add new Allows you to add new names and numbers. 3 Caller groups Allows you to show group list. 4 Speed dial Allows you to assign up to 8( touch dial allocations. 5 Settings Allows you to set the memory and to search item by Variable, name and number.
Accessing the Menu Search [Names 1] (Calling from phonebook) 1. Open the phonebook first by pressing mode. 2. Search by Pressing [Names] in a standby [Select] to enter. 3. Depending on setting Search by, the below menu may not appear. • Name • Number 4. You can find an entry by name and number. 5. Select [Search]. 6. If you want to edit, delete, copy an entry, or to add the voice to one, select [Options]. The below menu will be displayed.
Phonebook Accessing the Menu Add new [Names 2] You can add phonebook entry by using this function. Phone memory capacity is 200 entries. SIM card memory capacity depends on the cellular service provider. You can also save 20 characters of name in the Phone memory, and you can save characters in the SIM card. the number of character is SIM dependent feature. 1. Open the phonebook first by pressing mode. [Names] in standby 2. Scroll to highlight Add new, and press [Select] to enter. 3.
Accessing the Menu You should speak a word within 2 seconds, and the phone asks you to speak it again to ensure the accuracy of voice recognition. After voice recognition has finished, Voice is attached automatically. Note • The voice can only be attached to main number which you set. For example, If you change main number voice will be automatically attached changed number. This means that you cannot attach voice to mobile, office, home number simultaneously.
Phonebook Accessing the Menu Caller groups [Names 3] You can list up to 20 members per one group. There are 7 groups you can make lists to. 1. Press [Names] to enter into the phonebook in standby mode. 2. Scroll to Caller groups item then press menu. [Select] to enter this 3. Every Group list will be displayed.: Family, Friend, Colleague, VIP. 4. Select Group name that you want to manage by pressing [Select]. 5. Then submenus below will be displayed. • Member list 1.
Accessing the Menu • Group call ani. You can set the animation for each group. • LED color You can set LED color depending on Group. You can also change it in 7 colors. • Add member You can add the member in Caller groups. 1. Scroll to highlght Add member, and then press to enter. [Select] 2. The group member souldn't be exceeded 20. Otherwise, the error message will be displayed. 3. Press [OK] to add member. • Remove member You can delete the member already saved in phonebook.
Phonebook Accessing the Menu Speed dial [Names 4] You can assign any of the keys to with a Name list entry. You can call directly by pressing this key for 2-3 seconds. 1. Open the phonebook first by pressing mode. 2. Scroll to Speed dial, then press [Names] in a standby [Select] to enter this menu. 3. Every Speed dial will be displayed. 4. If you want to add Speed dial, select . Then, you can search the name in phonebook. 5.
Accessing the Menu 2. The three submenus are displayed. - If you select Variable, when adding entry, the phone will ask where to store. - If you select SIM, when adding entry, without asking where to store, the phone will store entry to SIM. - If you select Phone, when adding entry, without asking where to store, the phone will store entry to Phone memory. • Search by 1. Scroll to highlight Search by,then press [Select] to enter. 2. The three submenus are displayed.
Phonebook Accessing the Menu Copy all [Names 7] You can copy/move entries from SIM card memory to Phone memory or from Phone memory to SIM card memory. 1. Open the phonebook first by pressing mode. 2. Scroll to Copy all, then press [Names] in standby [Select] to enter this menu. 3. Then submenus below will be displayed. • SIM to Phone : You can copy the entry from SIM Card to Phone memory. • Phone to SIM : You can copy the entry from Phone memory to SIM Card.
Accessing the Menu Information [Names 9] Service Dial Number Use this function to access a particular list of services provided by your network operator (if supported by the SIM card). 1. Open the phonebook first by pressing mode. [Names] in a standby 2. Scroll to Service dial number, then press [Select] to enter. 3. The names of the available services will be shown. 4. Use and to select a service. Press [Send].
Menu Tree Accessing the Menu 1 Messages ENGLISH 1 Write messages Send Save Use template Use namecard Add dictionary List dictionary 2 Inbox Delete Edit Forward Get numbers Reply Return call 3 Outbox Delete Edit Forward Get numbers 4 Info service 1 Read 2 Receive CB 3 Alert 4 Language 5 Topics 36 5 Namecard 6 Templates 7 Settings 1 Message type 2 Validity period 3 Status report 4 Pay for reply? 5 SMS centre 6 Voicemail centre 8 Check memory 2 Call register 1 2 3 4 5 6 Missed calls Received calls Diall
Accessing the Menu 3 Profiles 1 Vibrate only 2 Quiet *-1 *-2 3 4 5 6 Enable Change General Loud Headset Car 4 Settings 37 ENGLISH 1 Alarm clock 1 Enable 2 Disable 2 Date & time 1 Date 2 Time 3 Phone settings 1 Display 2 Voice dial 3 LED indicator 4 Language 4 Call settings 1 Minute minder 2 Answer mode 3 Send number 4 Call waiting 5 Auto redial 6 Select line 7 Next incoming 8 CUG 5 Security settings 1 PIN code request 2 Call barring service 3 FDN setting 4 Change code 6 Network settings 1 Automatic
Menu Tree Accessing the Menu 5 Call divert 1 2 3 4 5 6 7 All voice calls If busy If not answered If out of reach All data calls All fax calls Cancel all diverts 6 Scheduler ENGLISH 1 New 1 Schedule 2 Memo 2 View day 1 Options 3 View all 4 Delete last 5 Delete all 38 7 Fun & Tools 1 Game 2 MY folder 1 Picture 2 Sound 3 Unit converter 4 Calculator 5 World time
Accessing the Menu 8 Internet 1 Home 2 Bookmarks 3 Push messages 1 Inbox 2 Receive 4 Profiles 5 Go to URL 6 Cache settings 1 Clear cache 2 Cache check 7 Security certif. 8 Reset profiles 9 SIM Service This menu depends on SIM and the network services.
Messages [Menu 1] Accessing the Menu Messages 1 This menu includes functions related to SMS (Short Message Service), voice mail, as well as the network’s service messages. Write message [Menu 1-1] You can write and edit text message up to 1024 characters. Also, you can check the number of characters. 1. Enter the Messages menu by pressing [Select]. 2. If you want to write a new message, select Write message in the menu. 3. Input the message by using eZi text. For details, see eZi text(Page 43). 4.
Accessing the Menu Send Sends the text message. 1. If you want to send the text message, enter the number you want. 2. Your phone asks you to enter the number that you want to send it to. 3. After sending it, your phone asks whether you will store the edited message. 4. Press if you want to store it in Outbox and press don’t want to. if you Save Stores the message in Outbox. 1. Your phone asks whether you will save the edited message. 2. Press if you want to save it in Outbox and press don’t want to.
Messages [Menu 1] Accessing the Menu Add dictionary If you add a word you use often, you can input it by pressing a key once for each character. 1. Enter the menu. 2. Scroll to highlight Add dictionary, and then press 3. Input a word, and then press [Select]. [Add]. List dictionary You can view the list you already saved words in a dictionary. 1. Enter the menu. 2. Scroll to highlight List dictionary, and then press [Select]. 3. You can check the word list. 4.
Accessing the Menu eZi-Text The eZi text allows you to type easily and quickly. If you just press a key marked a character on the keypad, you can get a character you want. It is useful to make a word and a sentence. If you press key for a long time, you can change the type of language. Also, the phone supports four modes: eZi Mode, Numeric mode, Capital mode, and Small mode. If you want to change mode, press key.
Messages [Menu 1] Accessing the Menu • How to use in Numeric mode To input a number in Numeric mode, you press a number key displayed on the keypad. • How to use in Capital mode To input Capital letter, you press a character key displayed on the keypad. • How to use in Small mode To input Small letter, you press a character key displayed on the keypad. Note ENGLISH • If you want to input a symbolic character, press key in each mode.
Accessing the Menu Inbox [Menu 1-2] When you receive a text message, your phone shows the symbol and stores it in the incoming message lists. Scroll to the desired message by using , . In addition, you can see Delete all for deleting all incoming messages at the bottom of the list. While reading the message, press [Options] to access the available options. Delete The selected message is deleted. Edit You can edit an incoming message and send or save the edited message.
Messages [Menu 1] Accessing the Menu Outbox [Menu 1-3] When you enter this menu, you can see the outgoing call list. Scroll to the desired message by using , and press to see the message. And if you want to exit Outbox menu, press . In addition, you can see Delete all for deleting all outgoing messages at the bottom of the list. While reading message, press submenus. [Options] to access the following Delete The selected message is deleted. Edit You can edit an outgoing message and send or save it.
Accessing the Menu Info service [Menu 1-4] (Dependent to network and subscription) Cell Broadcast messages (CB Message) are text messages by the network to GSM phone users. They provide general information such as weather reports, traffic news, taxis, pharmacies, and stock prices. Each type of information has the number; therefore, you can contact service provider. When you receive CB message, you can read it following sequence: Read [Menu 1-4-1] 1.
Messages [Menu 1] Accessing the Menu Alert [Menu 1-4-3] • Yes If you select this menu, your phone will beep when Cell broadcast message is received. • No If you select this menu, your phone will not beep despite Cell broadcast message is received. Language [Menu 1-4-4] You can select the language you want. Then your phone will receive the cell broadcast message in your chosen language.
Accessing the Menu Namecard [Menu 1-5] It’s for editing the namecard. The items of the namecard are a name, mobile, office, fax, and email. • Edit : You can edit a namecard. • Delete : You can delete a namecard. Templates [Menu 1-6] It’s for editing pre-defined messages. You can see 11 pre-defined messages in the list. You can save 6 templates before you edit. But you can changed them. The others are . • Edit : You can edit a template. • Delete : You can delete the template.
Messages [Menu 1] Accessing the Menu Settings [Menu 1-7] Message type [Menu 1-7-1] Text, Voice, Fax, Natl. paging, X.400, E-mail, ERMES Usually, the type of message is set to Text. You can convert your text into alternative formats, which are suitable for the device that will be received the message. Contact your service provider for the availability of this function.
Accessing the Menu Voicemail centre [menu 1-7-6] You can get the voicemail if this feature is supported by the network service provider. When new voicemail is arrived, the symbol will be displayed on the screen. Please check with your network service provider for details of their service in order to configure the handset. 1. Press key for a long time in standby mode. 2. You can check the following submenus. • Home [Menu 1-7-6-1] The number dialed on the home network to listen to voicemail.
Call register [Menu 2] Accessing the Menu 2 Call register Missed calls [Menu 2-1] This menu shows recently missed numbers. You can call by this number, also save and view date and time this menu. Received calls [Menu 2-2] This menu shows recently received numbers. You can call by this number, also save and view date and time. Dialled calls [Menu 2-3] This menu shows recently dialed numbers. You can call by this number, also save and view date and time.
Accessing the Menu Call charge [Menu 2-6] Within these submenus, you can view the duration and the call cost of your calls. Call duration [Menu 2-6-1] This function allows you to view the duration of your Last Call, All Calls, Incoming Calls and Outgoing Calls in hours, minutes and seconds. You can also reset the call timers. 1. Press [Menu] in standby mode. 2. Press for direct access or use register. and 3. Scroll to highlight Call duration and Press to enter Call [Select].
Call register [Menu 2] Accessing the Menu Note • The actual cost invoiced for calls by your service provider may vary, depending upon network features, rounding-off for billing, and taxes. Setting [Menu 2-6-3] [SIM Dependent] • Set tariff [Menu 2-6-3-1] You can set the currency type and the unit price. Contact your services providers to obtain charging unit prices. To select the currency or unit in this menu, you need the PIN2 code. 1. Press 2. Press register. [Menu] in standby mode.
Accessing the Menu • Set credit [Menu 2-6-3-2] This network service allows you to limit the costs of your calls by selected charging units. If you select Read, the number of remaining unit is shown. If you select Change, you can change your charge limit. 1. Press [Menu] in a standby mode. 2. Press for direct access or use register. 3. Scroll to highlight Setting and press and to enter Call [Select] to enter. 4. Select Set credit.
Call register [Menu 2] Accessing the Menu GPRS information [Menu 2-7] You can check the amount of data transferred over the network through GPRS. In addition, you can also view how much time you are online. 1. Press . 2. Scroll to the information you want to check. Your options include the following: WAP [Menu 2-8-1] You can check the data volume and the duration through WAP.
Profiles [Menu 3] Accessing the Menu Profiles 3 In this menu, you can adjust and customize the phone tones for different events, environments and caller’s group. 1. Press [Menu] in standby mode. 2. Press for direct access or use and to enter Profiles. 3. You can also enter this menu directly by pressing standby mode. key in Vibrate only [Menu 3-1] • Enable : You can adjust the profile as Vibration if you need vibration mode.
Profiles [Menu 3] Accessing the Menu General [Menu 3-3] • Enable : You can adjust the profile as General. • Change : You can change the values of Profile submenus. Loud [Menu 3-4] • Enable : You can adjust the profile as Loud if you are in a noisy environment. • Change : You can change the values of Profile submenus. Headset [Menu 3-5] • Change : You can change the values of Profile submenus. Car [Menu 3-6] • Change : You can change the values of Profile submenus.
Accessing the Menu A Group of Profiles submenus [Menu 3-x-x] Profiles menu have the submenus as shown below. Incoming alert type [Menu 3-x-1] Allows to alert for the incoming call for adjusting environment. Ring type [Menu 3-x-2] Allows to set the ring type for adjusting environment. Ring volume [Menu 3-x-3] Allows to set the ring volume for adjusting environment. Message alert type [Menu 3-x-4] Allows to alert when receiving a message for adjusting environment.
Profiles [Menu 3] Accessing the Menu Note • If you set the Handsfree kit to the phone, you can’t activate the vibration related with Incoming alert or Message alert menu. Therefore, in Handsfree menu, you can view the following submenus; - Incoming alert : Ring, Silent - Message alert : Beep, No alert Note Automatic answer • This function will be activated only when your phone is connected to the handsfree kit or headset. - Disable : The phone will not answer automatically.
Settings [Menu 4] Accessing the Menu Settings 4 You can set the following menus for your convenience and preferences. 1. Press [Menu] in standby mode. 2. Press for direct access to enter Settings. Alarm clock [Menu 4-1] You can set the phone to alarm at a specified within this menu. Enable [Menu 4-1-1] You can set the time (Hour and Minute) for raising the alarm. 1. Enter the menu. 2. Select Enable by pressing time you want. 3. Press [Select], and then enter the alarm [OK]. 4.
Settings [Menu 4] Accessing the Menu Disable [Menu 4-1-2] You can cancel setting the alarm time. 1. Enter the menu. 2. Select Disable by pressing [Select]. 3. Clear alarm message is displayed. 4. If you want to cancel, press [Yes]. If not, press Date & time [Menu 4-2] Date [Menu 4-2-1] • Set date In this menu, you can set the date of your phone. 1. Enter the menu. 2. Select Set date by pressing [Select]. 3. Enter the number you want to set the date. 4. Press [OK].
Accessing the Menu Time [Menu 4-2-2] The phone has its own clock. In this menu you can set the time and select between the 12-hour or 24-hour time formats. 1. Enter the menu. 2. Scroll to highlight Time by pressing [Select]. • Set time: You can set time of your phone in this menu. 1. Select Set time by pressing [Select]. 2. Enter the number you want to set the time. 3. Select the AM/PM you want to set the time format by pressing , key. 4. Press [OK].
Settings [Menu 4] Accessing the Menu • Wallpaper : You can select background picture in a standby mode. • Internet connect : You can set the animation as connecting Internet. • Power on : You can set the animation as turning on a phone. • Power off : You can set the animation as turning off a phone. • Welcome note : You can set the displayed message as turning on a phone. • Greeting note : If you select Yes, this menu allows you to select the standby display. In text mode, you can edit the text.
Accessing the Menu Voice dial [Menu 4-3-2] • Automatic : You can enter voice dial mode whenever you open folder. • Manual : You can enter voice dial mode by pressing for a long time. key Note • If any voice entries don't exist, "No trained voice" message will be displayed. LED indicator [Menu 4-3-3] You can check the network status through Call indicator Light. If you are in service area, Call Indicator Light will flicker to Green.
Settings [Menu 4] Accessing the Menu Call settings [Menu 4-4] You can set the menu relevant to a call by pressing Setting menu. [Select] in Minute minder [Menu 4-4-1] If you select Yes, you can check the call duration by beep sound every minute during a call. Answer mode [Menu 4-4-2] • Any key [Menu 4-4-2-1] If you select this menu, you can receive a call by pressing any key except key. • Folder open [Menu 4-4-2-2] If you select this menu, you can receive an incoming call by only opening folder.
Accessing the Menu Send number [Menu 4-4-3] (network and subscription dependent) • Yes [Menu 4-4-3-1] If you select this, you can send your phone number to the other party. That is, your phone number will be displayed on receiver’s phone. • No [Menu 4-4-3-2] If you select this, you can’t send your phone number. Call waiting [Menu 4-4-4] (network dependent) If this service is Enable, you can accept a waiting (incoming) call. If this service is Disabled, you cannot recognize the waiting (incoming) call.
Settings [Menu 4] Accessing the Menu Auto redial [Menu 4-4-5] • Yes [Menu 4-4-5-1] When this function is set on, your phone will make up to 10 attempts for a call after not connecting. • No [Menu 4-4-5-2] Your phone will not make any attempts to connect the call after not connecting. Select line [Menu 4-4-6] This function is only used if Two line service supported by the Service Provider. Two independent phone numbers are registered for the phone.
Accessing the Menu Next incoming [Menu 4-4-7] (network dependent) In case of Single Numbering Service, you can use the phone and a connected PC to send and receive fax, data, and voice. If you select the mode, you can receive data, fax, or voice each mode. Once you enter this menu, you following options are displayed. • Voice You can receive the voice call. • Data You can receive the data call. • Fax You can receive the fax call.
Settings [Menu 4] Accessing the Menu CUG (Closed User Group) [Menu 4-4-8] (network dependent) Use this function to restrict usage of the phone to calls with numbers that belong to certain user groups. When this function is used every outgoing call is associated with a group index. If a group index is specified, it is used for all outgoing calls. If no group index is specified, the network will use the preferential index (a specific index that is stored in the network).
Accessing the Menu Security settings [Menu 4-5] PIN code request [Menu 4-5-1] In this menu, you can set the phone to ask for the PIN code of your SIM card when the pone is switched on. If this function is activated, you’ll be requested to enter the PIN code. 1. Press [Menu] in standby mode. 2. Press key for direct access or use Settings. and to enter 3. Scroll to highlight Security settings menu. 4. Select PIN code request by pressing [Select]. 5. You can view the following submenus.
Settings [Menu 4] Accessing the Menu • Outg. intl roam: The barring service of all international outgoing calls except home network. • All incoming: The barring service of all incoming calls • Inc when roam: The barring service of all incoming calls when roaming • Cancel all diverts: You can cancel all barring service. • Change passwd: You can change the password for Call Barring Service. FDN setting [Menu 4-5-3] (SIM dependent) You can restrict your outgoing calls to selected phone number.
Accessing the Menu • Fixed dial num [Menu 4-5-3-1] On : You can restrict your outgoing calls to selected phone number. Off : You can call without restricting phone number. • Number list [Menu 4-5-3-2] You can view the number list saved as Fixed dial number. Change code [Menu 4-5-4] You can change the access codes: PIN, PIN2, Security code. 1. Press [Menu] in standby mode. 2. Press key for direct access or use Settings. and to enter 3. Scroll to highlight Security settings menu. 4.
Settings [Menu 4] Accessing the Menu Network settings [Menu 4-6] You can select the network which you will be registered either automatically or manually. Usually, the selection of the network used by the handset is automatic. Automatic [Menu 4-6-1] The phone automatically selects network which is available in the area. Manual [Menu 4-6-2] The phone will find the list of available networks and show you them.
Accessing the Menu GPRS settings [Menu 4-7] When you use GPRS to connect to the Internet, you can make a data call. In order to use GPRS, you set the following options.
Call divert [Menu 5] (network and subscription dependent) Accessing the Menu Call divert 5 The Call divert service allows to divert incoming voice calls, fax calls, and data calls to another number. For details, contact your service provider. 1. Press 2. Press divert. [Menu] in standby mode. for direct access or use and to enter Call All voice calls [Menu 5-1] Diverts voice calls unconditionally. If busy [Menu 5-2] Diverts voice calls when the phone is in progress.
Accessing the Menu All data calls [Menu 5-5] Diverts to a number with a PC connection unconditionally. All fax calls [Menu 5-6] Diverts to a number with a fax connection unconditionally. The submenus [Menu 5-x-x] Call divert menus have the submenus as shown below. Enable [Menu 5-x-1] Activating the corresponding service. • Voicemail box [Menu 5-x-x-1] Forwards to message center. This function doen't include All data calls and All fax calls menus.
Call divert [Menu 5] (network and subscription dependent) Disable [Menu 5-x-2] Deactivating the corresponding service. Check status [Menu 5-x-3] Checking the Status of the corresponding service. Cancel all diverts [Menu 5-7] Cancels all call divert service.
Scheduler [Menu 6] Accessing the Menu Scheduler 6 When you enter this menu a Calendar will show up. On top of the screen there are sections for date and icons. Whenever you change the date, the calendar will be updated according to the date. And square cursor will be used to locate the certain day. If you see under bar on the calendar, it means that there is a schedule that day. This function helps to remind you of your schedule and memo.
Scheduler [Menu 6] Accessing the Menu New [Menu 6-1] You can edit maximum 30 characters. You can take a note. You can choose the following types of note. You can make up to maximum 20 notes. Schedule [Menu 6-1-1] Input the subject, the schedule time, the repeat time, alarm time by pressing [Select]. • Repeat [Menu 6-1-1-1] - Once : no repeat. - Daily : repeat schedule daily for 5 days. - Weekly : repeat schedule weekly for 5 weeks. - Monthly : repeat schedule monthly for 5 months.
Accessing the Menu Memo [Menu 6-1-2] 1. Select New by pressing [Select]. 2. Scroll to highlight Memo. 3. Press [Select]. 4. Input the memo and then press [Select]. Note • Only if you set the schedule, "View day", "View all", "Delete last", and "Delete all" will be displayed. Otherwise, only "New" menu will be done. View day [Menu 6-2] Shows the note for the chosen day. Use , to browse through the note lists. If you set alarm for the note, Alarm watch is displayed.
Scheduler [Menu 6] Accessing the Menu View all [Menu 6-3] Shows the notes that are set for all days. Use , to browse through the note lists. You can use the same menu as "View day" by pressing [Options]. Delete last [Menu 6-4] You can delete for the last schedule already is notified you. Delete all [Menu 6-5] You can delete for the all note(s).
Fun & Tools [Menu 7] Accessing the Menu 7 Fun & Tools Game [Menu 7-1] The phone offers you the games to play with. Note • The conrol keys are different depending on a game. However, each one has an introduction to explain the main control keys. The rest ones are as follows.
Fun & Tools [Menu 7] Accessing the Menu MY folder [Menu 7-2] You can view, delete, and control download contents. Picture [Menu 7-2-1] Sound [Menu 7-2-2] The Submenus for each main one [Menu 7-2-x-x] • Edit title [Menu 7-2-x-1] You can edit the title for each download contents. • Delete [Menu 7-2-x-2] You can delete each download contents. • Delete all [Menu 7-2-x-3] You can delete all download contents. Unit converter [Menu 7-3] This converts any measurement into a unit you want.
Accessing the Menu 4. You can check the converted value for the unit you want. Also, you can input the prime number by pressing . 5. Press key or [Back] key if you want to end the process for converting the value. Calculator [Menu 7-4] Calculator This contains the standard functions such as +, , *, ÷ : Addition, Subtraction, Multiplication, and Division. 1. Input the numbers by pressing numeric keys. 2. Use a navigation key to select a sign for calculation. 3. Then input the numbers followed by the sign.
Fun & Tools [Menu 7] Accessing the Menu World time [Menu 7-5] You can view the time for each city around the world. Also, you can set the current time to city time you select. 1. Select the city belonged to the time zone by pressing , key. 2. If you use , key, you can check the other city belonged to same time zone of country. 3. You can set the current time to the city time you select. 4. Press [Back] key to exit the menu.
Internet [Menu 8] Accessing the Menu Internet 8 Your phone supports services based on Wireless Application Protocol(WAP). You can access services supported by your network. The services menu allows you to get the information such as news, weather reports, and flight times. Home [Menu 8-1] Return to homepage. The homepage may be the site which is defined in activated profile. It will be defined by Service Provider if you don’t make in activated profile.
Internet [Menu 8] Accessing the Menu Push messages [menu 8-3] You can manage an inbox and a message for useing push service. Inbox [Menu 8-3-1] You can read or delete the push messages. Receive [Menu 8-3-2] You can set theoption whether you will receive the message or not. Profiles [Menu 8-4] You can make up to 5 profiles and activate only one out of them. Scroll to desired profile and press to access available options. • Activate [Menu 8-4-1-1] Activate the selected profile.
Accessing the Menu - Conn. type [Menu 8-4-1-2-3] The options for connection type are Temporary or Continuous and depend on the gateway you are using. Continuous [Menu 8-4-1-2-3-1] A confirmed delivery mechanism but generates more network traffic. Temporary [Menu 8-4-1-2-3-2] A non-confirmed (connectionless) service. A few handsets may set the type using a numeric key as follows: 9200 9201 connectionless non-secure connection (Temporary). connection-orientated non-secure connection (Continuous). - Conn.
Internet [Menu 8] Accessing the Menu - Gateway info. [Menu 8-4-1-2-5] Almost WAP gateways do not require User ID and Password. If your gateway does’t have ones, those should be provided by your network. Also, they must be set up before browsing WAP sites. - Data setting [Menu 8-4-1-2-6] IP address : Input the IP address of the WAP gateway you access. Dial number : Input the telephone number to dial to access your WAP gateway. Call type : Select the type of data call.: Analogue or Digital(ISDN).
Accessing the Menu - Linger time [Menu 8-4-1-2-8] You need to select one of four timeout periods, after which the WAP Browser will report a failure to send data (for example because the WAP gateway is not responding). You can continue to browse WML cards in the current deck or stored in the handset cache of memory effectively ‘offline’ but when you select a link to card outside the current deck and not held in the cache you will activate a new data call. • Rename [Menu 8-4-1-3] Edit the Profile Name.
Internet [Menu 8] Accessing the Menu Cache settings [Menu 8-6] You can remove the contents of Cache memory or change the Cache mode. Clear cache [Menu 8-6-1] The contents of Cache memory will be removed. Cache check [Menu 8-6-2] You can change the time for checking the Cache memory. • Always [Menu 8-6-2-1] The cache is always checked whenever URL is loaded or URL is navigated. • Start only [Menu 8-6-2-2] The cache is only checked when the WAP is started.
On line menu Accessing the Menu If you are on line, you can view the following these menus. ■ Home Same to [Menu 8-1] ■ Reload Reloads the current page. ■ Bookmarks Same to [Menu 8-2] ■ Save as Bookmark You can save a site as bookmark. ■ Go to URL You can move to the site you want. In this menu, you can also edit the site address. ■ Go to email server You can move to the E-mail server that you configured. ■ Set as email server You can set the address of current site as E-mail server.
How to Use Data and Fax call Additional Functions To be able to data or fax service, you need the communicate software such as a data or a fax program. Before using these functions, you need to connect your phone to a computer or make sure that your phone is in connection with a compatible device. Sending Data or Fax Calls 1. Connect your computer to the phone. 2. After starting the communicate software, make a call and transmit a data or fax. 3.
Additional Functions Receiving Data or Fax Calls - Single number If you have a SIM card that does not support separate voice, data and fax numbers, the phone does not recognize the type of incoming call. To use a data or a fax service, make sure that you want to receive a data or fax call mode. You first have to set the phone to one of these options in the call mode (Settings ➝ Call Setting ➝ Next Incoming) sub menu. To receive a data or fax call 1. Press [Menu] in standby mode. 2.
In call Menu Additional Functions The menu displayed on the handset screen during a call is different to the default main menu reached from the idle screen, and the options are described here. 1 DURING A CALL 1-1 Putting a Call on Hold You can place a call on hold or retrieve by just pressing the [Send] key. When a call is made or answered, press the [Send] key to place it on hold. When a call is held, press the [Send] key to make it active.
Additional Functions 1-4 Answering an Incoming Call To answer an incoming call when the handset is ringing, simply press the [Send] key. The handset is also able to warn you of an incoming call while you are already in a call. A tone sounds in the earpiece, and the display will show that a second call is waiting. This feature, known as Call Waiting, is only available if your network supports it. For details of how to activate and deactivate it see Call waiting [Menu 4-4-4].
In call Menu Additional Functions 1-7 Switching DTMF Tones on During a Call To turn DTMF tones on during a call, for example, to allow your handset to make use of an automated switchboard, select the [Menu] key, then DTMF On. DTMF tones can be turned off the same way. 1-8 Calling up the Main Menu The Messages and SIM Tool kit main menu options can be reached from the in-call menu by selecting the [Menu] key, then Main Menu.
Additional Functions 2-1 Making a Second Call You can make a second call while you are already in a call. To do this, enter the second number and press [Send]. When you get second call the first call is automatically put on hold. You can swap between calls by selecting the [Menu] key then Swap. 2-2 Setting up a Multiparty Call You can connect a call on hold to the currently active call to form a multiparty call by selecting the [Menu] key then Multiparty/Join all.
In call Menu Additional Functions 2-7 Putting a Member of a Multiparty Call on Hold To place one selected caller (whose number is currently displayed on-screen) of a multiparty call on hold, select the [Menu] key then Multiparty/Exclude. 2-8 A Private Call in a Multiparty Call To have a private call with one caller of a multiparty call, display the number of the caller you wish to talk to on the screen, then select the [Menu] key and Multiparty/Private to put all the other callers on hold.
Care and Maintenance When using this unit, basic safety precautions as below should be always followed. • Do not disassemble this unit. (Take it to a qualified service technician when repair work is required.) • Away from electrical appliance such as a TV, radio or personal computer. • The unit should be situated from heat sources such as radiators or cookers. • Do not drop. • Do not subject this unit to mechanical vibration or shock.
Care and Maintenance ■ Caring for the Battery • You do not need to completely discharge the battery before recharging. Unlike other battery systems, there is no memory effect that could compromise the battery’s performance. • Use only LG batteries and chargers. LG chargers are designed to maximize the battery life. • Do not disassemble or short-circuit the battery pack. • Keep the metal contacts of the battery pack clean. • Replace the battery when it no longer provides acceptable performance.
Technical Data General Product name : G5200 System : GSM 900 / DCS 1800 SIM card : Small plug-in card only 3V Dimensions Size : 84 x 44 x 20.
MEMO ENGLISH 104
