L4200A Color Monitor User's Guide Benutzerhandbuch Manuel d’utilisation Manuale d'istruzioni Guía del usuario Guia do usuário Gebruikshandleiding Felhasználói útmutató http://www.lge.com P/NO. : 3828TUL227B(0407-REV03) Printed in Korea Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service.
Installation and Connection Input Selection and Tracking Safety Precautions A1 Accessories A4 Using the Remote Control A5 Connecting the Speakers - Optional A8 Name and Function of the Parts A9 Connecting the Monitor A10 Connecting the VCR/DVD A13 Connecting the DVD/HDTV A15 Connecting AV Outputs A16 Selecting and Adjustment the Screen A17 Name of the Buttons in the Screen Adjustment Unit OSD Menu How to adjust the OSD (On Screen Display) screen When Connected to your PC A21 Adjusti
Safety Precautions Please read these safety precautions carefully before using the monitor. Warning If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death. Caution If you ignore the caution message, you may be slightly injured or the product may be damaged Precautions in installing the Monitor Warning Keep away from heat sources like electrical heaters. - Electrical shock, fire, malfunction or deformation may occur.
Warning Make sure to connect the power cable to the grounded current. - You may be electrocuted or injured. Use the rated voltage only. - The monitor can be damaged, or you may be electrocuted. During a thunder or lightning storm, unplug the power cable or signal cable. - You may be electrocuted or a fire can break out. Do not connect several extension cords, electrical appliances or electrical heaters to a single outlet.
Safety Precautions Caution Do not shock the monitor when moving it. - You may be electrocuted or the monitor can be damaged Do not dispose the product-packing box. Use it when you move. Make the panel face forward and hold it with both hands to move. - If you drop the monitor, the damaged monitor can cause electric shock or fire. Contact with the service center for repair. Precautions in Using the Monitor Warning Do not disassemble, repair or modify the monitor at your own discretion.
Please check the accessories in the product package. * The monitor and the accessories can be different from the figures shown here. Free Mount Type Desktop Stand Type OR Monitor Remote Controller/ Batteries (AAA x 2) Diskette/User's Guide/Cards Power Cord 15-pin D-Sub Signal Cable DVI-D Signal Cable Audio Cable (PC) Optional Wall-mount Rack Please refer to the enclosed "Installation Guide" when installing the wall-mount rack.
Using the Remote Control Name of the Remote Controller Buttons Power On/Off Button Mute button • Input Select Button • AV Button (See next page) BRT.W • Menu Button • Exit Button Volume Button Sleep Button When watching AV/DVD/HDTV - The monitor will be automatically turned off after a certain period of time. Press this button repetitively to select an appropriate time duration PSM Button When watching AV/DVD/HDTV - Automatically adjusts the image.
• AV Button If you press the button once, the following Input Signal Window will appear. Select the signal type you want using the button. BRT.W DVI DIGITAL DSUB ANALOG VIDEO1(CVBS) VIDEO2(S-Video) SCART 1 SCART 2 This button will be enabled only when you selected the AV signal. The signal type will be changed with the following order. Set the signal type you want.
Using the Remote Control 3. Swap Button You can swap the main screen and the sub-screen when the PIP/POP/PBP function is used. PIP SWAP POP SWAP PBP When 'Input Signal 1' comes on in the main screen, only 'Input Signal 2' can be displayed on the sub-screen. On the contrary, if the main screen displays 'Input Signal 2', the sub-screen can display 'Input Signal 1' only. You can swap 'Input Signal 1' and 'Input Signal 2' using the SWAP button.
Connecting the Speakers - Optional Use the screws to secure the speakers on the rear side of the monitor as shown in the below figure. When the speaker is installed.
Name and Function of the Parts Rear View Back Cap - Open the back cap before you install the monitor. OUT IN Video [Case 1] Video [Case 2] RS-232C Serial ports PC signal inputs Connect the audio cable to the *LINE OUT jack of the PC sound card. AV Input ports Connect the power cord *LINE OUT A terminal used to connect to the speaker including a built-in amplifier (Amp). Make sure that the connecting terminal of the PC sound card is checked before connecting.
To arrange cables in order 1. Disassemble the stand cover. The cover may be easily disassembled by pressing down on the base as shown in the figure. Stand cover 2. After connecting the cables, correctly position the stand cover into the holes on the stand. If securely connected, you will hear the latch click into place.
Connecting the Monitor First of all, see if the computer, monitor and the peripherals are turned off. Then, connect the signal input cable. A When connecting with the DVI signal input cable. B When connecting with the DSub signal input cable. (IBM compatible PC) C When connecting with the DSub signal input cable. (Macintosh) Rear side of the monitor.
powered up, check if the main power switch is in the 'on' position. Main Power Switch Power button B Turn on the PC. Select an input signal. Press the Input Select button on the remote controller to select the input signal. Or, press the SOURCE button at the front side of the monitor. A B When connecting with a DVI-D signal input cable. • Select DVI DIGITAL: DVI-D digital signal. When connecting with a D-Sub signal input cable.
Connecting the VCR/DVD Connect the video cable as shown in the below figure and then connect the power cord (See page A11). A When connecting with an RCA cable. • Connect the input terminal with a proper color match. (Video – Yellow, Sound (left) – White, Sound (right) – Red) OUT IN Monitor Red R Y RCA Cable (not included) White W Yellow Video VCR/DVD B When connecting with an S-Video cable. • Connect to the S-Video input terminal to watch high image quality movies.
Video SCART Cable (not included) Monitor ENGLISH C When connecting with a SCART cable. AUDIO VCR/DVD G L D R Select an input signal. Press the Input Select button on the remote controller to select the input signal. Or, press the SOURCE button at the front side of the monitor. A When connecting with an RCA cable. • Select VIDEO 1 (CVBS) B When connecting with an S-Video cable.
Connecting the DVD/HDTV Connect the video/audio cable as shown in the below figure and then, connect the power cord (See page A11). • Connect the input terminal with a proper color match. • Select the terminal that can be connected most easily among COMP-1 and COMP-2. Video Red White Red Red White Red Audio Cable (not included) Blue Green Component Cable (not included) Blue Green Monitor DVD HDTV Receiver Select an input signal.
Connect to the external device if you record the broadcasting. When you set the input signal of the main screen as 'VIDEO1 (CVBS)', you can transmit the signal that you're watching to the AV output terminal.
Selecting and Adjusting the Screen Name of the Buttons in the Screen Adjustment Unit Power Button • Press the button to turn on the power. Press the button again to turn it off. Power LED • This Indicator lights up green when the display operates normally. If the display is in DPM (Energy Saving) mode, this indicator color changes to amber. MENU Button • Use this button to show/hide the OSD (On Screen Display) menu screen.
AUTO/SELECT Button [A] For DSUB signal • Select the icon to adjust on the OSD screen. • If you press the [AUTO/SELECT] button, automatic screen adjustment will be started. [B] Other signals that DSUB • The current signal and mode information will be displayed.
Selecting and Adjusting the Screen OSD Menu – When Connected to Your PC Icon Function Description Adjusts screen brightness, contrast and color that you prefer. Adjustment Adjusts position of the screen, clock or phase. Tracking Adjusts the audio function. Audio Adjusts the screen status according to the circumstances. Setup Adjusts PIP/POP/PBP mode function. PIP/POP/PBP OSD Menu – When Watching Video/DVD/HDTV Icon Function Description Sets/Selects the channel.
Pops up the menu screen Select a menu icon Select a menu icon Adjust the status Save adjustment Exit from the menu screen. • Use the remote controller to adjust the OSD screen. 1 Press the MENU Button, then the main menu of the OSD appears. 2 To access a control, use the 3 When the icon you want becomes highlighted, press the SET Button. 4 Use the 5 Accept the changes by pressing the SET Button. 6 Exit the OSD by Pressing the EXIT Button. Buttons.
Selecting and Adjusting the Screen OSD Menu – When Connected to Your PC Adjusting Screen Color CONTRAST To adjust the contrast of the screen. BRIGHTNESS To adjust the brightness of the screen. COLOR Adjusting screen color. Press the submenu for COLOR. USER button to display the 9300K/6500K Selecting a factory setting color set. • 9300K: Slightly bluish white. • 6500K: Slightly reddish white. RED GREEN Set your own color levels.
SSM The best sound tone quality will be selected automatically depending on the video type that you're currently watching. • USER : Select this option to use the user-defined audio settings. • FLAT : The most commanding and natural audio. • MOVIE : Select this option to enjoy sublime sound. • MUSIC : Select this option to enjoy the original sound when listening to the music. • SPORTS : Select this option to watch sports broadcasting.
Selecting and Adjusting the Screen Selecting the Options LANGUAGE To choose the language in which the control names are displayed. IMAGE SIZE To select the image size of the screen. (FULL/1:1) OSD To adjust position of the OSD window on the screen. POSITION Press the button to display the submenu for OSD POSITION. Left Moving the OSD screen position horizontally. Right Up Moving the OSD screen position vertically. Down TRANSPARENCY To adjust the transparency of the OSD menu screen.
To adjust the PIP(PICTURE IN PICTURE) of the screen DVI DIGITAL PIP ON/OFF After selecting ON in the PIP ON/OFF menu, the following menu items can be adjusted. PIP SOURCE To select an input signal for PIP. PIP SIZE To adjust the size of the PIP screen. (SMALL/LARGE) PIP IMAGE To adjust the image of the PIP screen; Press the button to display the submenu for PIP IMAGE. Use the buttons to adjust the item to the desired level. The items of the sub-menu may vary depending on the type of the source.
Selecting and Adjusting the Screen Adjusting PIP/POP/PBP Mode (Multiple Screen) Functions To adjust the POP(PICTURE OUT PICTURE) of the screen DVI DIGITAL POP ON/OFF After selecting ON in the POP ON/OFF menu, the following menu items can be adjusted. POP SOURCE To select an input signal for POP. POP IMAGE To adjust the image of the POP screen; Press the button to display the submenu for POP IMAGE. Use the buttons to adjust the item to the desired level.
To adjust the PBP(PICTURE BY PICTURE) of the screen DVI DIGITAL PBP ON/OFF After selecting ON in the PBP ON/OFF menu, the following menu items can be adjusted. PBP SOURCE To select an input signal for PBP. PBP SIZE To adjust the size of the PBP screen. (FULL/4:3) PBP IMAGE To adjust the image of the PBP screen; Press the button to display the submenu for PBP IMAGE. Use the buttons to adjust the item to the desired level. The items of the sub-menu may vary depending on the type of the source.
Selecting and Adjusting the Screen OSD Menu – When Watching VCR/DVD/HDTV Adjusting Screen Image PSM The PSM function automatically adjusts the screen image quality depending on the AV usage environment. • USER : Select this option to use the user-defined settings. • GAME : Select this option to enjoy dynamic image when playing a game. • STANDARD : The most general and natural screen display status. • DYNAMIC : Select this option to display with a sharp image.
SSM The best sound tone quality will be selected automatically depending on the video type that you're currently watching. • USER : Select this option to use the user-defined audio settings. • FLAT : The most commanding and natural audio. • MOVIE : Select this option to enjoy sublime sound. • MUSIC : Select this option to enjoy the original sound when listening to the music. • SPORTS : Select this option to watch sports broadcasting.
Selecting and Adjusting the Screen Selecting the Options LANGUAGE To choose the language in which the control names are displayed. TRANSPARENCY IMAGE SIZE To select the image size of the screen. (FULL/4:3/SPECTACLE/1:1) OSD To adjust position of the OSD window on the screen. POSITION Press the button to display the submenu for OSD POSITION. Left Moving the OSD screen position horizontally. Right Up Moving the OSD screen position vertically. Down TRANS To adjust the transparency of the OSD menu screen.
To adjust the PIP(PICTURE IN PICTURE) of the screen DVI DIGITAL PIP ON/OFF After selecting ON in the PIP ON/OFF menu, the following menu items can be adjusted. PIP SOURCE To select an input signal for PIP. PIP SIZE To adjust the size of the PIP screen. (SMALL/LARGE) PIP IMAGE To adjust the image of the PIP screen; Press the button to display the submenu for PIP IMAGE. Use the buttons to adjust the item to the desired level. The items of the sub-menu may vary depending on the type of the source.
Selecting and Adjusting the Screen Adjusting PIP/POP/PBP Mode (Multiple Screen) Functions To adjust the POP(PICTURE OUT PICTURE) of the screen DVI DIGITAL POP ON/OFF After selecting ON in the POP ON/OFF menu, the following menu items can be adjusted. POP SOURCE To select an input signal for POP. POP IMAGE To adjust the image of the POP screen; Press the button to display the submenu for POP IMAGE. Use the buttons to adjust the item to the desired level.
To adjust the PBP(PICTURE BY PICTURE) of the screen DVI DIGITAL PBP ON/OFF After selecting ON in the PBP ON/OFF menu, the following menu items can be adjusted. PBP SOURCE To select an input signal for PBP. PBP SIZE To adjust the size of the PBP screen. (FULL/4:3) PBP IMAGE To adjust the image of the PBP screen; Press the button to display the submenu for PBP IMAGE. Use the buttons to adjust the item to the desired level. The items of the sub-menu may vary depending on the type of the source.
Controlling the Multiple Monitors Use this method to connect several monitors to a single PC. You can control several monitors at a time by connecting them to a single PC. Connecting the cable Connect the RS-232C cable as shown in the picture. * The RS-232C protocol is used for communication between the PC and monitor. You can turn the monitor on/off, select an input source or adjust the OSD menu from your PC.
Commands Related with User Control Auto Assign Address 1. Reset (1) Send Command 0 Length 06h 1 Flag 6Eh 2 3 Address Command 00h F0h 4 Value 00h 5 Checksum * Set the checksum value to "00h" when adding all message contents. * Wait about 50ms for a reply after issuing a command. (2) Reply from monitor * No reply will be given for the "Reset" command. 2.
Controlling the Multiple Monitors Miscellaneous Commands (1) Send Command 0 Length 08h 1 Flag 6Eh 2 3 4 Address Command Parameter xxh 03h 5 Value#1 6 Value#2 7 Checksum (2) Reply from Monitor 0 Length 06h 1 Flag 50h 2 3 Address Command xxh 03h 4 Value 00h 5 Checksum (3) Parameter FUNCTION MAIN POWER ON/OFF DSUB ANALOG DVI DIGITAL VIDEO1(CVBS) MAIN INPUT VIDEO2(S-Video) COMPONENT1/SCART1 COMPONENT2/SCART2 DSUB ANALOG DVI DIGITAL VIDEO1(CVBS) SUB INPUT VIDEO2(S-Video) COMPONENT1/SCART1 COMPONENT2/S
..........
Troubleshooting No image is displayed Is the monitor power cord connected? • See if the power cord is properly connected to the outlet. Does the power LED is turned on? • See if the power switch is turned on. Power is on, power LED is green but the screen appears extremely dark. • Adjust brightness ( Does the power LED look yellow? • If the monitor is in power saving mode, move the mouse or press any key.
Is the screen position wrong? • D-Sub analog signal – Press the “AUTO” button in the remote controller to automatically select the optimal screen status that fits into the current mode. If adjustment is not satisfactory, use the Position OSD menu. • See if the video card resolution and frequency are supported by the monitor. If the frequency is out of range, set to the recommended resolution in the Control Panel – Display – Setting menu.
Troubleshooting The audio function does not work. No sound? • See if the audio cable is connected properly. • Adjust the volume. • See if the sound is set properly. No sound is available when the PIP/POP/PBP mode is engaged. • See if the Sound is set to On in the PIP/POP/PBP menu. Sound is too dull. • Select the appropriate treble sound. • Select the appropriate bass sound. Sound is too low. • Adjust the volume. The screen size function in the OSD menu does not work.
Display 42 inches (106.68cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating 42inches viewable 0.681mm pixel pitch Sync Input Horizontal Freq. Vertical Freq.
Specifications Dimensions &Weight [2] [1] H H W D W D [4] [3] H H W D W WidthxHeightxDepth [1] 105.7 cm(41.61 inches) x 70.20 cm(27.64 inches) x 29.45 cm(11.59 inches) [2] 105.7 cm(41.61 inches) x 65.30 cm(25.71 inches) x 11.91 cm(4.69 inches) [3] 125.9 cm(49.57 inches) x 70.20 cm(27.64 inches) x 29.45 cm(11.59 inches) [4] 125.9 cm(49.57 inches) x 65.30 cm(25.71 inches) x 11.91 cm(4.69 inches) Net [1] 34.65kg (76.39 lbs) [3] 37.25kg (82.12 lbs) Environmental Conditions [2] 30.25kg (66.
Preset mode 1 2 3 4 5 6 7 8 9 10 VGA VGA VGA VESA VESA VESA VESA VESA MAC VESA 640 x 350 720 x 400 640 x 480 640 x 480 640 x 480 800 x 600 800 x 600 800 x 600 832 x 624 1024 x 768 Horizontal Frequency (kHz) Vertical Frequency (Hz) 31.469 31.468 31.469 37.500 43.269 37.879 46.875 53.674 49.725 48.
