OWNER’S MANUAL DVD Micro Hi-Fi System Please read this manual carefully before operating your set and retain it for future reference.
Getting Started Safety Information 1 CAUTION Getting Started RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Getting Started This device is equipped with a portable battery or accumulator. CAUTION: The apparatus shall not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, shall be placed on the apparatus. Disposal of your old appliance 1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. 2.
Table of Contents Table of Contents 1 Getting Started 2 6 6 6 6 6 7 7 7 7 7 8 9 10 12 Safety Information Unique Features – Portable In – USB Direct Recording – Full HD up-scaling Accessories Introduction – Playable Discs – About the “7” Symbol Display – Symbols Used in this Manual – Regional Codes Playable file Requirement Remote control Front panel Rear panel 2 Connecting 13 13 14 14 15 16 16 16 16 16 Attaching the speakers to the unit Connections to Your TV – Component Video Connection – HDMI O
Table of Contents 4 Operating 5 Troubleshooting 24 24 25 25 25 25 25 25 25 26 26 26 27 28 28 28 28 29 29 29 29 29 29 30 30 30 30 30 30 31 31 32 32 Using the Home Menu Basic Operations Other Operations – Displaying Disc Information on-screen – To display the DVD Menu – To display the DVD title – 1.
Getting Started Unique Features Accessories Please check and identify the supplied accessories. 1 Portable In Getting Started Listens to music from your portable device. (MP3, Notebook, etc) USB Direct Recording Records music from CD to your USB device. Remote control (1) Battery (1) Video cable (1) Portable cable (1) FM antenna (1) Karaoke Disc (1) Full HD up-scaling Views Full HD picture quality with simple setup.
Getting Started Introduction Playable Discs DVD-VIDEO (8 cm / 12 cm disc) Discs such as movies that can be purchased or rented. DVD±R (8 cm / 12 cm disc) Video mode and finalized only. Symbols Used in this Manual r DVD-Video, DVD±R/RW in Video mode or VR mode and finalized t Audio CDs y Video files contained in the USB/Disc u Audio files contained in the USB/Disc i Photo files , Note Indicates special notes and operating features. , Tip Indicates tip and hints for making the task easier.
Getting Started Playable file Requirement DivX file requirement DivX file compatibility with this unit is limited as follows: Available resolution: within 800 x 600 (W x H) pixels.
Getting Started Remote control • • • • • • a • • • • • • • • • • • d • • • • • P RADIO&INPUT: Changes input sources. SPEAKER LEVEL: Sets the sound level of desired speaker. MARKER: Marks play list. SOUND EFFECT: Selects a sound effect mode. B OPEN/CLOSE: Ejects or insert the disc from slot loader. SLEEP: Sets the System to turn off automatically at a specified time. (Dimmer : The display window will be darken by half.) OPTICAL: Changes input source to optical directly. MUTE: Mutes the sound.
Getting Started Front panel 1 Getting Started
Getting Started a Disc Slot b iPod dock c 1/! (POWER) Switches the unit ON or OFF. e FUNC. (FUNCTION) Changes the input source or function. f USB Port Connects an USB device. g EQ You can choose fixed sound impression. h B (OPEN/CLOSE) Ejects or insert the disc from slot loader. i C/V (Skip/Search): Goes to next or previous file/track/chapter. Searches backward or forward (Press and hold) Tunes in the desired radio station. d/M (PLAY / PAUSE) Starts playback.
Getting Started Rear panel 1 Getting Started a OPTICAL IN Connects to optical audio equipment. b HDMI OUT Connects to TV with HDMI inputs. (Interface for digital audio and video) c Antenna Connector FM- Connects the FM wired antenna d VIDEO OUT Connects to a TV with video inputs. e COMPONENT VIDEO (Y PB PR)OUTPUT (PROGRESSIVE SCAN) Connects to a TV with Y PB PR inputs. f Speakers connectors Connects the speaker cables.
Connecting 13 Attaching the speakers to the unit Connections to Your TV To connect the cable to the unit, press each plastic finger pad to open the connection terminals on the unit. Insert the wire and release the finger pad. Make one of the following connections, depending on the capabilities of your existing equipment. Connect the black stripe of each wire to the terminals marked - (minus) and the other end to the terminals marked + (plus).
Connecting Component Video Connection HDMI Out Connection Connect the COMPONENT VIDEO OUTPUT (PROGRESSIVE SCAN) jacks on the unit to the corresponding input jacks on the TV using component cables. If you have a HDMI TV or monitor, you can connect it to this unit using a HDMI cable (Type A, High Speed HDMI™ cable). Connect the HDMI OUT jack on the unit to the HDMI IN jack on a HDMI compatible TV or monitor. Set the TV’s source to HDMI (refer to TV’s Owner’s manual).
Connecting , Note If a connected HDMI device does not accept the audio output of the unit, the HDMI device’s audio sound may be distorted or may not output. Video Connection Connect the VIDEO OUT jack on the unit to the video in jack on the TV using a video cable. You can hear the sound through the system’s speakers. Unit 2 Connecting When you connect a HDMI or DVI compatible device make sure of the following: - Try switching off the HDMI/DVI device and this unit.
Connecting Resolution Setting The unit provides several output resolutions for HDMI OUT and COMPONENT VIDEO OUT jacks. You can change the resolution using [Setup] menu. 1. Press n HOME. 2. Use A/D to select the [Setup] and press b ENTER. The [Setup] menu appears. Optional Equipment Connection AUDIO (PORT. IN) In Connection Connect an output of portable device (MP3 or PMP etc) to the AUDIO (PORT. IN) input connector. 2 Connecting 3.
Connecting 17 USB Connection OPTICAL In connection Connect the USB port of USB Memory (or MP3 player, etc.) to the USB port on the front of the unit. Connect an optical output of Unit (or Digital Device etc) to the OPTICAL IN connector. 2 You can only recharge your iPod through USB port. To listen to music on iPod, refer to the page 18. Connecting Removing the USB Device from the unit 1. Choose a different function mode or press Z STOP twice in a row. 2. Remove the USB device from the unit.
Connecting Antenna Connection Playing the iPod Connect the supplied FM antenna for listening to the radio. You can enjoy the sound with your iPod. For details about iPod, refer to the iPod User Guide. Connect the FM Wire antenna to the FM antenna connector. 1. Connect the iPod firmly. 2 Connecting If you turn this unit on, your iPod is automatically turned on and recharging starts. 2. Press FUNC. on the unit or P RADIO&INPUT on the remote control to select iPod function.
Connecting To 19 , Note Do this ON REMOTE Pauses or restart d/M d/M Skip C/V C/V Search Press and hold C/V Press and hold c/v Move to the previous menu - A Move to the desired item - Chooses a item - W/S D Compatible iPod We recommend installing the latest software version. The unit supports the models as follows/ iPod nano 1 G, 2 G, 3 G, 4 G, 5 G, 6 G/ iPod classic/ iPod 4 G, 5 G/ iPod touch 2 G, 3 G, 4 G/ iPhone 3 G, 4.
System Setting Adjust the setup settings By using the Setup menu, you can make various adjustments to items such as picture and sound. To display and exit the Setup menu 1. Press n HOME. Displays the [Home Menu]. You can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup menu item, see pages 20 to 23. 2. Select an [Setup] by using A D.
System Setting 21 Language Display Mode Menu Language The Display Mode setting works only when the TV Aspect mode is set to 4:3. Select a language for the Setup menu and then on screen display. [Letterbox] Disc Audio / Disc Subtitle / Disc Menu [Panscan] Select the language you prefer for the audio track (disc audio), subtitles, and the disc menu. [Original] Refers to the original language in which the disc was recorded.
System Setting Audio Lock (Parental Control) DRC (Dynamic Range Control) Initial Setting the Area Code: Make the sound clear when the volume is turned down (Dolby Digital only). Set to [On] for this effect. When you use this unit for the first time, you have to set the Area Code. 1. Select the [Lock] menu and then press D. Vocal Select [On] to mix karaoke channels into normal stereo. This function is effective for multi-channel karaoke DVDs only.
System Setting 23 Password Others You can enter or change password. 1. Select [Password] on the [Lock] menu and then press D. 2. Press b ENTER. 3. Input a password and press b ENTER. To change the password, press b ENTER when the [Change] option is highlighted. Input a password and press b ENTER. Enter it again and press b ENTER to verify. 4. Press n HOME to exit the menu. , Note If you forget your password, you can clear it using the following steps: 2.
Operating Using the Home Menu 1. Press n HOME. Displays the [Home Menu]. 2. Select an option by using AD. 3. Press b ENTER then selected option menu. [Music] – Displays [MUSIC] menu. [Movie] – Start video media’s playback or displays the [MOVIE] menu. [Photo] – Displays [PHOTO] menu. [Setup] – Displays the [Setup] menu. , Note 4 Operating You can not select the [Music], [Movie] or [Photo] option when the USB device is not connected or a disc is not inserted. Basic Operations To Stop 3.
Operating 25 Other Operations To display the DVD title r Displaying Disc Information on-screen You can display various information about the disc loaded on-screen. 1. Press m INFO/DISPLAY to show various playback information. The displayed items differ depending on the disc type or playing status. 2. You can select an item by pressing WS and change or select the setting by pressing AD. Title – Current title number/ total number of titles. Chapter – Current chapter number/ total number of chapters.
Operating Resume playback Marked Playback ryut ut The unit records the point where you pressed the Z STOP depending on the disc. If “MZ (Resume Stop)” appears on the screen briefly, press d PLAY, MONO/STEREO to resume playback (from the scene point). The mark function enables you to store your favourite files from any disc or USB device in the unit memory. If you press Z STOP twice or unload the disc, “Z”(Complete Stop) appears on the screen. The unit will clear the stopped point.
Operating 27 To delete a Marker 1. Use WS to select the track that you wish to erase from the marked file. 2. Press MARKER. To delete all Markers Use WSAD to select [Deselect All] then press b ENTER in program edit mode. , Note The markers are also cleared when the disc or USB device is removed, the unit is switched to power off or the function is switched to others.
Operating Options while viewing a photo System Select - Optional You can use various options during viewing a photo in full screen. You must select the appropriate system mode for your TV system. Press and hold M PAUSE/STEP for more than five seconds to be able to select a system in the [Home Menu]. 1. While viewing a photo in full screen, press m INFO/DISPLAY to display the option menu. , Note 2. Select an option using WSAD.
Operating 29 Setting the Clock Sleep Timer Setting 1. Turn the unit on. Press SLEEP one or more times to select delay time between 10 and 180 minutes, after the unit will turn off. 2. Press CLOCK for at least 2 seconds. 3. Choose time mode by pressing C/V. - AM 12:00 (for an AM and PM display) or 0:00 (for a 24 hour display) 4. Press SET to confirm your selection. 5. Select the hours by pressing C/V. 6. Press SET. 7. Select the minutes by pressing C/V. 8. Press SET.
Operating Radio Operations Be sure that both FM aerials are connected. (Refer to the page 18.) Listening to the radio 1. Press P RADIO&INPUT until FM appears in the display window. The last received station is tuned in. 2. Press and hold TUNING (-/+) for about two seconds until the frequency indication starts to change, then release. Scanning stops when the unit tunes in a station. Or Press TUNING (-/+) repeatedly. 3.
Operating Sound adjustment On Display This system has a number of pre-set surround sound fields. You can select a desired sound mode by using SOUND EFFECT. You can change the SOUND EFFECT using A D arrow key while the sound effect information is displayed on. The displayed items for the equalizer maybe different depending on sound sources and effects. You can enjoy more virtual surround sound. BYPASS You can enjoy the sound without equalizer effect.
Operating Advanced Operations Recording to USB You can record music or sound souce to USB device by connecting in to the port on the unit. During recording MP3/WMA, there is no sound. 1. Connect the USB device to the unit. When you stop recording during playback, the file that has been recorded at that time will be stored. (Audio CD only) 2. Select a mode in which you want to record. Play back a sound source first. 3. Start the recording by pressing X REC. 4. To stop recording, press Z STOP.
Troubleshooting 33 Troubleshooting PROBLEM No power No picture CORRECTION Plug the power cord into the wall outlet securely. Select the appropriate video input mode on the TV so the picture from the unit appears on the TV screen. Connect the video cables securely to both the TV and unit. Select the correct input mode of the unit so you can hear the sound from the unit. There is little or no sound Connect the audio cables into the connection terminals correctly. Replace with a new audio cable.
Appendix Area Code List Choose an area code from this list.
Appendix 35 Language code List Use this list to input your desired language for the following initial settings: [Disc Audio], [Disc Subtitle] and [Disc Menu].
Appendix Trademarks and Licenses iPod is a trademark of Apple Inc., registered in the U.S. and other countries. iPhone is a trademark of Apple Inc. “Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod or iPhone respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
Appendix 37 Specifications General Power requirements 200 - 240 V ~ 50/ 60 Hz Power consumption 55 W Dimensions (W x H x D) 135 X 295 X 315 mm without foot Net Weight (Approx.) 3.45 kg Operating temperature 41 °F to 95 °F (5 °C to 35 °C) Operating humidity 5 % to 90 % Inputs/ Outputs VIDEO OUT 1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1 COMPONENT VIDEO OUT (Y) 1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1 (Pb)/(Pr) 0.
Appendix Front Speaker Type 3 Way 4 speaker Impedance Rated 4Ω Input Power 80 W Max. Input Power 160 W Net Dimensions (W x H x D) 126 X 295 X 315 mm Net Weight 4.35 kg Design and specifications are subject to change without notice.
Appendix 39 Maintenance Notes on Discs Handling Discs Handling the Unit When shipping the unit Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory. Keeping the exterior surfaces clean Do not use volatile liquids such as insecticide spray near the unit. Wiping with strong pressure may damage the surface.
Импортер LG Electronics RUS Адрес импортера 143160 Российская Федерация, Московская область, Рузский район, сельское поселение Дороховское, 86 км. Минского шоссе, д.9 Адрес производителя : ЛГ Электроникс инк. Китай, г. Хучжоу, Индустриальный парк, Зона развития Зонг Каи, ул.
