User guide

Operating14
Operating
3
DEMO
In the power o state, it demonstrates the function
on display window by pressing DEMO. To cancel
the DEMO, press it again.

While DEMO, this unit will keep DEMO
status even if you unplug the power cord
connection.

You can enjoy other functions during
the DEMO. Then the DEMO will pause to
temporary.
- Without input key in 10 sec, the DEMO
will play back automatically.
,
Note
Radio Operations
Be sure that FM aerial is connected.
(Refer to the page 12)
Listening to the radio
1. Press F (FUNCTION) until FM appears in the
display window.
The last received station is tuned in.
2. Press and hold TUNING -/+ for about two
seconds until the frequency indication starts to
change, then release. Scanning stops when the
unit tunes in a station.
Or
Press TUNING -/+ repeatedly.
3. Adjust the volume by rotating VOLUME on
the unit or by pressing VOL +/- on the remote
control repeatedly.
Presetting the Radio Stations
You can preset 50 stations for FM .
Before tuning, make sure to turn down the volume.
1. Press F (FUNCTION) until FM appears in the
display window.
2. Select the desired frequency by pressing
TUNING -/+.
3. Press PROGRAM/MEMO. a preset number will
 ash in the display window.
4. Press FOLDER · PRESET
w
/
s
to select the
preset number you want.
5. Press PROGRAM/MEMO. The station is stored.
6. Repeat steps 2 to 5 to store other stations.
7. To listen a preset station, press
FOLDER · PRESET
w
/
s
.