User guide

Function
21
1. Press the W.PEAK button on the remote control.
2. Press the
, button to select the screen condition you want.
●
The default value may change depending on input mode.
●
White peaking can be adjusted from 0 to 10.
●
Adjust to higher setting to achieve brighter picture. Adjust to lower setting for
darker picture.
●
You can use this function through the MENU button.
●
Press the MENU button twice or the EXIT button to exit the menu screen.
White peaking Function
1. Press the MENU button and then use , button to select the menu.
2. Press the
, button to select Brilliant Color
TM
item.
3. Press the
, button to select On or Off.
●
Press the MENU button twice or the EXIT button to exit the menu screen.
* What is the Brilliant Color
TM
function?
This function increases the entire brightness of the screen or decreases it a little to
make the rich grayscale color.
Brilliant Color
TM
Function
1. Press the MENU button and then use
, button to select the menu.
2. Press the
, button to select
Black level item.
3. Press the
, button to select Low or High.
●
This function works in the following mode : HDMI(YCbCr)
●
Press the MENU button twice or the EXIT button to exit the menu screen.
* What is the Black level function?
When you watch the movie, this function adjusts the set to the best picture
appearance. Adjusting the contrast and the brightness of the screen using the
black level of the screen.
Black level Function
Color temp.
Smart picture
Gamma curve shift
Brilliant color
TM
Black level
White peaking 10
Expert Color
Reset
Medium
Normal
On
Low
MENU Prev. Move Select
Color temp.
Smart picture
Gamma curve shift
Brilliant color
TM
Black level
White peaking 10
Expert Color
Reset
Medium
Normal
On
Low
MENU Prev. Move Select
White peaking 10
Exit Adjust