User guide

Installing and Composition
13
1.Place the projector on a sturdy and horizontal surface with the PC or AV source.
2.Place the projector with the desired distance from the screen. The distance between the projector and the screen
determines the actual size of the image.
3.Position the projector so that the lens is set at a right angle to the screen. If the projector is not set at a right angle, the
screen image will be crooked. If this is so then the keystone adjustment may correct this (Refer to page 26.).
4.Connect the cables of the projector to a wall power socket and other connected sources.
projection distance based on the picture format
Projection distance (D)
Projection off-set ratio:115%
57.5mm
Projection distance (D)
Basic Operation of the Projector
* The longest/shortest distance
show status when adjusted by
the zoom function.
Screen
Screen height (X)
X/2
X/2
Y/2
Y/2
Screen
Screen Width (Y)
40 1016 813 610 1595 1849
50 1270 1016 762 1999 2317
60 1524 1219 914 2403 2786
70 1778 1422 1067 2808 3254
80 2032 1626 1219 3212 3723
90 2286 1829 1372 3616 4191
100 2540 2032 1524 4020 4660
120 3048 2438 1829 4829 5597
140 3556 2845 2134 5637 6534
160 4064 3251 2438 6446 7471
180 4572 3658 2743 7254 8408
200 5080 4064 3048 8062 9345
220 5588 4470 3353 8871 10282
240 6096 4877 3658 9679 11219
250 6350 5080 3810 10084
11688
4 : 3 Scale
Image
Projection Distance
Diagonal Size
(inch)
Diagonal Size
(mm)
Horizontal Size
(mm)
Vertical Size
(mm)
Wide Distance
(mm)
Tele Distance
(mm)